Manual Arahan Pemasangan Dinding Tanpa Jurang Samsung 75 inci (WMN-M22EB/ZA)

pengenalan

This instruction manual provides comprehensive guidance for the safe and proper installation, operation, and maintenance of your Samsung 75-inch No Gap Wall Mount (Model: WMN-M22EB/ZA). This wall mount is specifically designed for compatible Samsung 75-inch QLED and Frame TVs, offering a minimal gap between the TV and the wall for a sleek, integrated look. Please read all instructions carefully before beginning installation.

Maklumat Keselamatan

AMARAN: Improper installation may result in serious personal injury or damage to your TV and property. If you are unsure about the installation process, please consult a qualified professional.

• Ensure the mounting surface can safely support the combined weight of the mount and your television.
• Always locate wall studs or use appropriate anchors for concrete/brick walls. Do not rely solely on drywall for support.
• Use all provided hardware and do not substitute with incompatible parts.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan kerja semasa pemasangan.
• Two people are recommended for safe installation, especially when handling the television.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Wall Mount brackets
• Panduan Cepat
• Dry-wall Anchor (for WMN-20E(A) only, check your specific model)
• Various screws and washers for TV and wall attachment.

Refer to the detailed parts list in your printed Quick Guide for exact quantities and types of hardware.

Imej: Selesaiview of the Samsung No Gap Wall Mount components, including the main wall plate and TV attachment brackets.

Persediaan

1. TV Preparation

Before mounting, prepare your TV by attaching the specialized brackets. These brackets integrate seamlessly with the TV's design to achieve the 'No Gap' aesthetic.

1. Letakkan TV anda dengan berhati-hati menghadap ke bawah di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
2. Cari lubang pelekap di belakang TV anda.
3. Attach the TV-side brackets to the back of the television using the appropriate screws provided. Ensure they are securely fastened.
4. Connect the One Invisible Connection cable (if applicable to your TV model) and any other necessary cables, routing them through the designated channels on the TV back panel.

2. Penyediaan Dinding

Accurate wall preparation is crucial for a secure and level installation.

1. Determine the desired height and center position for your TV on the wall.
2. Use a stud finder to locate at least two adjacent wall studs. Mark their centers precisely. For concrete or brick walls, ensure you use appropriate masonry drill bits and anchors.
3. Utilize the provided drilling template to mark the pilot holes for the wall mount brackets. Ensure the template is level before marking.
4. Drill pilot holes at the marked locations. The drill bit size will vary depending on your wall type (wood stud, concrete, or brick). Refer to the Quick Guide for specific drill bit sizes.
5. Attach the wall plates to the wall using the provided lag bolts. Tighten them securely, but do not overtighten. Use a level to confirm the wall plates are perfectly horizontal.

3. Memasang TV

With the wall plates securely installed, you can now mount your television.

1. With assistance, carefully lift the TV and align the TV-side brackets with the wall plates.
2. Gently lower the TV, ensuring the brackets engage with the wall plates. You should hear a click as the TV locks into place.
3. Push the bottom of the TV towards the wall until the magnets engage, securing the TV flush against the wall.
4. Confirm the TV is securely mounted by gently pulling on the bottom edges. It should not move freely.

Beroperasi

The Samsung No Gap Wall Mount allows for minor adjustments to optimize your viewpengalaman dalam.

• Pelarasan Menegak: The mount allows for vertical adjustment of up to 6 degrees (10mm). To adjust, gently lift the bottom of the TV away from the wall to disengage the magnets, then carefully slide the TV up or down to the desired position. Push the TV back to re-engage the magnets.
• Condong: For high-on-the-wall placements, such as above a fireplace, the mount allows for a slight tilt. To tilt, pull the bottom of the TV away from the wall. The TV will pivot on the top brackets. Adjust to the desired angle.

Penyelenggaraan

To ensure the longevity and optimal performance of your wall mount, follow these simple maintenance tips:

• Periodically check all screws and bolts to ensure they remain tight. Do not overtighten.
• Clean the mount and surrounding wall area with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, contact Samsung support.

Menyelesaikan masalah

If you encounter any issues during or after installation, refer to the following common solutions:

• TV Tidak Aras: Ensure the wall plates were installed perfectly level. Minor adjustments can sometimes be made by slightly loosening and re-tightening the wall plate screws, or by utilizing the vertical adjustment feature if available.
• Difficulty Engaging Magnets: Ensure no cables are obstructing the back of the TV or the wall mount. The TV should be pushed firmly against the wall until the magnets engage.
• TV Feels Loose: Immediately remove the TV from the mount. Re-check all wall and TV bracket connections for tightness and proper installation into studs/anchors. Do not re-hang the TV until the issue is resolved.

For further assistance, contact Samsung customer support.

Spesifikasi

Waranti & Sokongan

For warranty information, please refer to the documentation included with your Samsung television or visit the official Samsung website. For technical support or assistance with your No Gap Wall Mount, please contact Samsung customer service directly.

Sokongan dalam talian: www.samsung.com/us/support/