Manual Pengguna Pendakap Lowrance HOOK2 9"

1. Pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance HOOK2 9" Gimbal Bracket. Please read these instructions carefully before proceeding with installation to ensure correct usage and to prevent damage to the product or associated equipment.

2. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Lowrance HOOK2 9" Gimbal Bracket
• Two (2) Gimbal Knobs with threaded posts
• Four (4) Mounting Screws

The image displays the Lowrance HOOK2 9-inch gimbal bracket, a black U-shaped mounting accessory. It includes two large black thumb screws with metal posts and four smaller silver screws, which are the necessary hardware for installation.

3. Persediaan dan Pemasangan

The gimbal bracket allows for secure mounting and adjustable viewing angles for your Lowrance HOOK2 9" display unit.

3.1 Memasang Pendakap

1. Pilih Lokasi: Choose a flat, stable surface on your vessel that provides optimal viewing and access to the display unit, ensuring it is clear of obstructions.
2. Tandai Lubang Gerudi: Position the gimbal bracket in the desired location. Use a pencil or marker to mark the four mounting points on the surface through the holes in the bracket's base.
3. Gerudi Lubang Juruterbang: Using an appropriate drill bit size for the provided mounting screws, carefully drill pilot holes at the marked locations. Ensure the depth of the holes does not exceed the screw length.
4. Selamatkan Braket: Place the gimbal bracket over the pilot holes and secure it firmly using the four provided mounting screws. Do not overtighten.

3.2 Attaching the Display Unit

1. Jajarkan Paparan: Position your Lowrance HOOK2 9" display unit between the arms of the installed gimbal bracket, aligning the mounting holes on the sides of the display with the holes on the bracket arms.
2. Insert Knobs: Insert the threaded posts of the two gimbal knobs through the bracket arms and into the corresponding mounting holes on the display unit.
3. Ketatkan Tombol: Hand-tighten the gimbal knobs until the display unit is securely held in place but still allows for adjustment.

4. Operasi

Once installed, the gimbal bracket allows for easy adjustment of your display unit's viewsudut ing.

4.1 Melaraskan Viewsudut

1. Loosen Knobs: Slightly loosen both gimbal knobs by turning them counter-clockwise. Do not remove them completely.
2. Laraskan Sudut: Tilt the display unit to your desired viewsudut ing.
3. Secure Angle: Hand-tighten both gimbal knobs by turning them clockwise until the display unit is firmly held in the new position. Ensure both knobs are tightened equally to prevent uneven stress on the bracket.

5. Penyelenggaraan

Regular maintenance ensures the longevity and proper function of your gimbal bracket.

• Pembersihan: Clean the bracket periodically with a soft, damp kain. Elakkan pembersih atau pelarut yang melelas yang boleh merosakkan kemasan.
• Pemeriksaan: Routinely check all mounting screws and gimbal knobs for tightness. Re-tighten if necessary. Inspect the bracket for any signs of wear, corrosion, or damage.
• Storan: If the display unit and bracket are removed for storage, store them in a dry, protected environment.

6. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

6.1 Display Unit is Loose or Sways

• Penyelesaian: Ensure both gimbal knobs are fully tightened. If the issue persists, check if the display unit's mounting holes or the bracket's arms are damaged.

6.2 Difficulty Adjusting Angle

• Penyelesaian: Loosen the gimbal knobs slightly more. If the movement is still stiff, inspect for any debris or obstruction in the pivot points. Do not force the adjustment.

7. Spesifikasi

8. Waranti dan Sokongan

For information regarding product warranty, please refer to the documentation included with your original purchase or visit the official Lowrance website. For technical support or further assistance, please contact Lowrance customer service directly.