1. Pengenalan
The Transcell TI-500 SL is a robust and reliable digital weighing indicator designed for industrial applications. This NTEP and Canadian certified device features a durable NEMA 4X stainless steel enclosure, ensuring protection in harsh environments. It is equipped with a large 0.8-inch backlit LCD screen for clear readability of up to 50,000 display divisions. The TI-500 SL supports up to four 350 Ohm load cells and offers full duplex RS-232 serial communication for integration with various support equipment. Power is supplied via an AC adapter or a rechargeable lead-acid battery, providing flexibility for continuous operation.
Menghadap ke hadapan view of the Transcell TI-500 SL Weighing Indicator. The device features a stainless steel enclosure with a blue and white control panel. A large digital LCD screen displays '50.0 kg'. Below the screen are several circular buttons for functions like 'UNITS', 'ZERO OFF', 'SET', 'NET GROSS', 'TARE', and 'ON PRINT'. A black cable extends from the bottom of the unit, and an NTEP certification seal is visible in the lower left corner.
2. Maklumat Keselamatan
Please read all safety instructions carefully before operating the TI-500 SL indicator. Failure to comply with these instructions may result in injury or damage to the device.
Keselamatan Am
- Operate the device only in environments suitable for its NEMA 4X / IP65 rating.
- Do not attempt to open or repair the indicator yourself. Refer all servicing to qualified personnel.
- Keep the device away from excessive heat, moisture, and corrosive substances.
Keselamatan Elektrik
- Use only the provided AC adapter for power and battery charging.
- Pastikan salur keluar kuasa dibumikan dengan betul.
- Putuskan sambungan kuasa sebelum membersihkan atau melakukan sebarang penyelenggaraan.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Transcell TI-500 SL Weighing Indicator
- Stainless Steel Swivel Stand (pre-attached or separate)
- Penyesuai Kuasa AC
- Manual Pengguna (dokumen ini)
4. Persediaan
Pemasangan Fizikal
- Place the TI-500 SL indicator on a stable, level surface. The integrated stainless steel swivel stand allows for adjustable viewsudut-sudut.
- Pastikan pengudaraan yang mencukupi di sekeliling unit.
Sambungan Kuasa
- Connect the AC power adapter to the power input port on the indicator.
- Plug the AC adapter into a suitable power outlet. The internal rechargeable lead-acid battery will begin charging automatically.
Sambungan Sel Muatan
The TI-500 SL is designed to drive up to four 350 Ohm load cells.
- Locate the load cell input terminals on the indicator. These are typically sealed connections to maintain the NEMA 4X rating.
- Carefully connect the load cell cables to the corresponding terminals, ensuring correct polarity and wiring as per the load cell manufacturer's instructions.
- Secure all connections to maintain the enclosure's integrity.
Kuasa Awal Hidup
Tekan ke HIDUP/MATI button to power on the indicator. The display will perform a self-test and then show the current weight reading.
5. Arahan Operasi
The TI-500 SL features a user-friendly front panel with dedicated function keys.
Timbangan Asas
Once powered on, the indicator will display the weight detected by the connected load cells. Ensure the scale platform is clear before taking a measurement.
Mengecilkan Paparan
To set the display to zero when there is no load on the platform:
- Tekan ke ZERO OFF button. The display will reset to 0.00.
Taring (Net/Gross Weight)
To measure the net weight of an item by subtracting the weight of a container:
- Place the empty container on the scale platform.
- Tekan ke SASARAN button. The display will show 0.00 and the 'NET' indicator will illuminate.
- Add the item to be weighed into the container. The display will now show the net weight of the item.
- To return to gross weight, press the KASAR BERSIH butang.
Penukaran Unit
To switch between available weighing units (e.g., kg, lb):
- Tekan ke UNIT button. The display will cycle through the configured units.
Printing Weight Data
If connected to a compatible printer via the RS-232 port:
- Tekan ke ON PRINT button to send the current weight reading to the connected device.
Penentukuran
Calibration procedures are typically performed by qualified technicians. Refer to the detailed technical manual or contact Transcell Technology support for calibration instructions. All setup parameters can be entered via the front panel keys during calibration mode.
6. Penyelenggaraan
Pembersihan
The NEMA 4X stainless steel enclosure allows for easy cleaning.
- Putuskan sambungan penyesuai kuasa sebelum membersihkan.
- Wipe the indicator with a damp kain dan detergen lembut.
- Do not use abrasive cleaners or solvents that could damage the display or enclosure.
- Ensure all connections are sealed after cleaning.
Penjagaan Bateri
The TI-500 SL is equipped with a rechargeable lead-acid battery.
- Cas bateri sepenuhnya sebelum penggunaan awal.
- Recharge the battery when the low battery indicator appears or when the display dims.
- For long-term storage, ensure the battery is fully charged and store the unit in a cool, dry place. Recharge periodically if stored for extended periods.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your TI-500 SL indicator.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Indicator does not power on. | No power from AC adapter; discharged battery; faulty power button. | Check AC adapter connection and power outlet. Charge battery for several hours. If problem persists, contact support. |
| Display shows 'OVERLOAD' or '-----'. | Load cell overload; faulty load cell connection. | Remove excess weight from the scale. Check load cell wiring and connections. |
| Bacaan berat badan yang tidak tepat. | Scale not level; calibration required; damaged load cell. | Ensure scale is on a level surface. Perform calibration (if qualified) or contact service. Inspect load cells for damage. |
| Kegagalan komunikasi RS-232. | Incorrect cable; wrong baud rate/settings; faulty port. | Verify cable type and connection. Check communication settings on both indicator and connected device. |
For issues not listed here or if solutions do not resolve the problem, please contact Transcell Technology customer support.
8. Spesifikasi
| Ciri | Penerangan |
|---|---|
| Model | TI-500 SL |
| Pembinaan | Stainless Steel NEMA 4X / IP65 |
| Paparan | 0.8 inch, 6 Digit LCD with LED backlight |
| Sel Muatan | Drives up to four 350 Ohm Load Cells |
| Pelabuhan Bersiri | Dupleks Penuh RS-232C |
| kuasa | AC Adapter or Rechargeable Lead Acid Battery |
| Ciri Khas | Backlit Display, High Weight Capacity (up to 50,000 display divisions), Large Display |
| warna | Perak |
| Dimensi Produk | 2.9 x 5.5 x 8.9 inci |
| Berat badan | 3 paun |
9. Maklumat Waranti
Transcell Technology products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Transcell Technology webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
10. Maklumat Sokongan
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Transcell Technology customer support. Contact details can typically be found on the manufacturer's official webtapak atau pada pembungkusan produk.
Manufacturer: Transcell Technology
