1. Pengenalan
The Enbrighten Direct Wire Converter (Model 39971) is designed to integrate Enbrighten plug-in, linkable light fixtures into an existing electrical circuit. This allows for control of multiple linked lights from a single wall switch, eliminating visible power cords and freeing up electrical outlets. This manual provides essential information for safe installation, operation, and maintenance of your direct wire converter.
Image: Enbrighten Direct Wire Converter, Model 39971. This image shows the overall appearance of the white rectangular converter box.
2. Maklumat Keselamatan Penting
WARNING: RISK OF ELECTRIC SHOCK. INSTALLATION SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN OR LICENSED PROFESSIONAL. ALWAYS TURN OFF POWER AT THE CIRCUIT BREAKER BEFORE INSTALLATION.
- Baca semua arahan sebelum pemasangan dan penggunaan.
- Produk ini bertujuan untuk kegunaan dalaman sahaja.
- Ensure the power supply is disconnected at the circuit breaker or fuse box before beginning any electrical work.
- Sahkan bahawa voltage of your electrical supply matches the product's specifications (120V AC).
- Do not exceed the maximum electrical rating of 250V, max 10A.
- Sesuai untuk kering atau damp locations. Do not install in locations exposed to direct water spray or submersion.
- Do not connect or disconnect under load (i.e., with power on).
- All wiring must conform to national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Use only with compatible Enbrighten linkable puck and bar fixtures.
3. Kandungan Pakej
Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact customer support before proceeding with installation.
- Enbrighten Direct Wire Converter (1 unit)
- Skru Pemasangan
- Wire Connectors (Wire Nuts)
- Penyambung Pelega Terikan
Image: Front packaging of the Enbrighten Direct Wire Converter. This image illustrates the product and its primary function of converting plug-in fixtures to direct wire.
4. Persediaan & Pemasangan
This section outlines the steps for installing the Enbrighten Direct Wire Converter. Ensure all safety precautions are followed.
Alat Diperlukan (Tidak Termasuk):
- Pemutar Skru Kepala Phillips
- Pelucut Kawat
- Drill with 1/16" or 3/32" drill bit (for mounting)
- Cermin Mata Keselamatan
Image: Back packaging of the Enbrighten Direct Wire Converter. This image displays the 'Tools needed' section and a simplified wiring diagram for installation.
Langkah Pemasangan:
- Matikan Kuasa: Locate the circuit breaker controlling the area where you will install the converter and turn off the power. Verify power is off using a voltage penguji.
- Sediakan Lokasi Pemasangan: Choose a suitable, dry location for the converter box, typically inside a cabinet or under a counter, close to the intended light fixtures.
- Mount the Converter Box: Use the provided mounting screws to securely attach the converter box to the desired surface. Pre-drill pilot holes if necessary.
- Sediakan Pendawaian:
- Carefully remove a knockout from the converter box for your incoming electrical supply wire.
- Insert the electrical supply wire (e.g., Romex) through the knockout and secure it with the provided strain relief connector.
- Strip approximately 1/2 inch of insulation from the ends of the supply wires (black, white, and bare copper/green ground).
- Sambungan Wayar:
- Sambungkan black (hot) wire from your electrical supply to the wayar hitam inside the converter box using a wire connector.
- Sambungkan white (neutral) wire from your electrical supply to the wayar putih inside the converter box using a wire connector.
- Sambungkan bare copper or green (ground) wire from your electrical supply to the dawai hijau inside the converter box using a wire connector.
- Ensure all connections are secure and no bare wire is exposed outside the wire connectors.
- Connect to Light Fixtures: The converter box has output ports designed for Enbrighten linkable light fixtures. Plug the linking cables from your Enbrighten light fixtures directly into these ports. Ensure a secure connection.
- Close the Box: Carefully tuck all wires into the converter box and secure the cover with the screws.
- Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.
- Ujian: Operate your wall switch to confirm that the connected Enbrighten light fixtures turn on and off correctly.
Imej: Depan view of the Enbrighten Direct Wire Converter. This shows the input and output ports for connecting to electrical wiring and linkable fixtures.
Imej: Sisi view of the Enbrighten Direct Wire Converter. This angle highlights the compact design and mounting tabs.
5. Operasi
Once properly installed, the Enbrighten Direct Wire Converter allows you to control all connected Enbrighten linkable light fixtures from a single wall switch. Simply toggle the wall switch to turn the lights ON or OFF.
The converter itself does not have any user-operable controls. Its function is to provide a hardwired power source for your linkable lighting system.
6. Penyelenggaraan
The Enbrighten Direct Wire Converter requires minimal maintenance.
- Pembersihan: Ensure power is off at the circuit breaker before cleaning. Wipe the exterior of the converter box with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Pemeriksaan: Periodically inspect the converter and its connections for any signs of damage, loose wires, or overheating. If any issues are found, turn off power immediately and consult a qualified electrician.
- Tiada Bahagian Boleh Diservis Pengguna: The converter contains no user-serviceable parts. Do not attempt to open or repair the unit.
7. Penyelesaian masalah
If you experience issues with your Enbrighten Direct Wire Converter, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala. | Tiada kuasa pada penukar. | Check the circuit breaker and ensure it is ON. Verify all wire connections are secure. |
| Lampu berkelip-kelip atau malap. | Loose wire connection or incompatible fixtures. | Turn off power and check all wire connections. Ensure you are using compatible Enbrighten linkable fixtures. |
| Converter box feels warm. | Normal operation or overloaded circuit. | A slight warmth is normal. If it feels excessively hot, turn off power immediately and consult an electrician. Ensure the total wattage of connected lights does not exceed the converter's rating. |
| Only some lights turn on. | Loose connection between light fixtures. | Turn off power and check the linking cable connections between the light fixtures and to the converter. |
Jika langkah penyelesaian masalah tidak menyelesaikan masalah, hubungi khidmat pelanggan atau juruelektrik yang berkelayakan.
8. Spesifikasi
- Nombor Model: 39971
- Voltage: 120 Volt (AC)
- Arus Maksimum: 10 Amps
- Wat Sumber Cahaya Serasi Maksimumtage: 4.5 Watts (per fixture, ensure total does not exceed 10A circuit capacity)
- Bahan: plastik
- warna: putih
- Dimensi Produk: 1.15"L x 2.4"W x 4.96"H
- Jenis Pemasangan: Screw On
- Keserasian: Enbrighten linkable puck and bar fixtures
- Pensijilan: UL Disenaraikan (E218874)
Image: Close-up of the product label on the Enbrighten Direct Wire Converter. This label provides UL listing information, electrical ratings, and contact details.
9. Waranti & Sokongan
This Enbrighten product comes with a limited-lifetime warranty, ensuring reliability for years to come. For detailed warranty information, please visit the manufacturer's webtapak atau rujuk pembungkusan produk.
For technical support, questions, or warranty claims, please contact Jasco Products Company, LLC, the manufacturer of Enbrighten products.
- Pengeluar: Syarikat Produk Jasco, LLC
- Webtapak: www.byjasco.com
- Telefon Perkhidmatan Pelanggan: 1-800-654-8483 (7:00 AM – 8:00 PM CST)
