TOWSMART B07B894CHK

TOWSMART Standard 80 in. Under Trailer Light Kit with Side Marker Lights User Manual

Brand: TOWSMART | Model: B07B894CHK

1. Produk Lebihview

The TowSmart Standard Trailer Light Kit is designed for trailers under 80 inches in width, providing essential lighting functions. This kit includes incandescent lights suitable for various trailer styles. It features a durable, weatherproof, and corrosion-resistant housing with a built-in reflex lens made from acrylic, ensuring resilience against harsh weather conditions. The lights function as tail lights, side turn signals, brake lights, and include a license plate illuminator.

Depan view of two red trailer lights and two amber side marker lights

Image 1.1: The TowSmart Standard Trailer Light Kit components, showing the main red tail/brake lights and amber side marker lights.

2. Ciri-ciri Utama

3. Kandungan Pakej

Selepas membuka pakej, sila sahkan bahawa semua komponen berikut disertakan:

All components of the TowSmart trailer light kit laid out, including two red lights, two amber lights, wiring harness, and license plate bracket.

Image 3.1: All included components of the TowSmart Standard Trailer Light Kit.

4. Maklumat Keselamatan

WARNING: Always disconnect the vehicle's battery before performing any electrical work to prevent injury or damage.

5. Persediaan dan Pemasangan

5.1 Senarai Semak Pra-Pemasangan

5.2 Langkah Pemasangan

  1. Pasang Lampu:

    Attach the two main stop/turn/tail lights to the rear of the trailer using the provided 2-bolt studs and mounting hardware. Ensure they are securely fastened and positioned correctly for visibility. The side marker lights should be mounted on the sides of the trailer, typically towards the front or middle, ensuring they are visible from the side.

    sebelah view of a red trailer light and an amber side marker light, showing mounting bolts and wires.Bawah view of a red trailer light showing the bulb and wiring connections.

    Imej 5.1: Sisi view of main light and side marker light showing mounting points. Image 5.2: Bottom view of main light showing bulb and wiring.

  2. Pasang Kurungan Plat Lesen:

    Mount the license plate bracket to the rear of the trailer, typically near the left main light, ensuring the license plate illuminator function can properly light the plate.

  3. Route the Wiring Harness:

    Carefully route the 20 ft. wiring harness along the trailer frame, securing it with zip ties or clips to prevent snagging or damage. Ensure the harness reaches both the lights and the trailer connector at the front.

  4. Sambungkan Lampu:

    Connect the wires from the main lights and side marker lights to the appropriate wires on the main wiring harness. Typically, the wiring color code is standard:

    • Kawat coklat: Tail lights and side marker lights (running lights).
    • Kawat kuning: Left turn signal and brake light.
    • Kawat Hijau: Right turn signal and brake light.
    • Kawat Putih: Ground wire. Ensure this is securely connected to the trailer frame for a good ground connection.

    Use appropriate wire connectors (e.g., crimp connectors) and insulate all connections with electrical tape or heat shrink tubing to protect against moisture and corrosion.

  5. Sambung ke Kenderaan:

    Plug the trailer's wiring harness connector into the corresponding receptacle on your towing vehicle.

  6. Uji Semua Fungsi:

    With the trailer connected to the vehicle, test all lighting functions: running lights, brake lights, left turn signal, right turn signal, and hazard lights. Ensure the license plate illuminator is also working correctly.

6. Arahan Operasi

Once properly installed and connected to a towing vehicle, the TowSmart Trailer Light Kit operates automatically in conjunction with your vehicle's lighting system:

Always perform a quick check of all trailer lights before each trip to ensure they are functioning correctly and are visible to other drivers.

7. Penyelenggaraan

Regular maintenance will ensure the longevity and reliable performance of your trailer light kit:

8. Penyelesaian masalah

If you encounter issues with your trailer light kit, refer to the following table for common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
No lights illuminate.No power from vehicle; faulty ground connection; main wiring harness disconnected.Check vehicle's fuse for trailer lights. Ensure ground wire is securely attached to clean metal on trailer frame. Verify harness is fully plugged into vehicle.
One or more lights not working.Burnt out bulb; loose or corroded wire connection; faulty light assembly.Replace bulb. Inspect and clean wire connections at the light and harness. Test light assembly with a known good power source.
Lampu malap atau berkelip-kelip.Poor ground connection; low voltage from vehicle; corroded connections.Clean and secure ground connection. Check vehicle's electrical system. Clean all wire connections.
Brake lights or turn signals not working.Specific wire for that function is disconnected or damaged; vehicle's turn signal/brake fuse.Check yellow (left) and green (right) wires for continuity and secure connection. Check vehicle's fuses.
Lampu plat lesen tidak berfungsi.Burnt out bulb; disconnected brown wire; faulty illuminator.Replace bulb. Check brown wire connection.

9. Spesifikasi Teknikal

SpesifikasiPerincian
JenamaTOWSMART
Nombor Model (ASIN)B07B894CHK
UPC849278014018
Berat Barang3.2 paun
Dimensi Pakej11.5 x 9 x 3.5 inci
Ciri KhasWaterproof, Corrosion Resistant Housing, Built-in Reflex Lens
Jenis Perkhidmatan KenderaanTrailer (under 80 in. width)
Warna KantaRed (main lights), Amber (side marker lights)
Bahan LensaAkrilik
Tarikh Tersedia Pertama23 Ogos 2017

10. Waranti dan Sokongan

TOWSMART products are manufactured to high-quality standards. For specific warranty information regarding your Standard 80 in. Under Trailer Light Kit, please refer to the documentation included with your purchase or visit the official TOWSMART webtapak.

For technical support, replacement parts, or further assistance, please contact TOWSMART customer service. You can find contact information on the TOWSMART Store on Amazon atau pegawai mereka webtapak.

Dokumen Berkaitan - B07B894CHK

Praview TowSmart 4-Way Light Tester Installation Instructions
Step-by-step installation instructions for the TowSmart 4-Way Light Tester (Model 1486). Includes wiring guide, usage steps, and support contact information from Winston Products Company.
Praview TowSmart Trailer Light Kit Installation Guide
Step-by-step installation instructions for TowSmart trailer light kits, covering vehicle and trailer wiring. Includes models 1400, 1401, 1405, 1431, 1433, 2331.
Praview TowSmart Hitch Ball with 1" Shank Installation Instructions
Official installation instructions for the TowSmart Hitch Ball with a 1-inch shank. Includes critical safety warnings, step-by-step guidance, and torque specifications for proper trailer hitch ball installation.
Praview TowSmart Hitch Ball with 3/4" Shank Installation Instructions
Step-by-step installation guide for the TowSmart Hitch Ball with a 3/4" shank, including important safety warnings and torque specifications.
Praview TowSmart Hitch Ball with 1-1/4" Shank Installation Instructions
Detailed installation instructions for the TowSmart 1-1/4 inch shank hitch ball, including important safety warnings, step-by-step guidance, and torque specifications. Learn how to properly install your TowSmart hitch ball for safe towing.
Praview TowSmart Hitch Pin Installation Instructions
Detailed installation instructions for the TowSmart Hitch Pin, including safety warnings, step-by-step guidance, and contact information for Winston Products Company.