1. Pengenalan
This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the IP-COM G3224P 24-Port Managed PoE Switch. Please read this manual thoroughly before using the device to ensure proper and safe operation.
The IP-COM G3224P is a high-performance managed Power over Ethernet (PoE) switch designed for small to medium-sized businesses and enterprise networks. It offers 24 Gigabit Ethernet ports with PoE+ capabilities and additional SFP ports for fiber uplinks, providing flexible and scalable network solutions.
2. Produk Lebihview
2.1 Kandungan Pakej
- IP-COM G3224P 24-Port Managed PoE Switch
- Kord Kuasa
- Kit Pemasangan Rak (pendakap dan skru)
- Kaki Getah (untuk penempatan desktop)
- Panduan Pemasangan Pantas
2.2 Penerangan Panel Hadapan
The front panel of the IP-COM G3224P switch features various ports and LED indicators for status monitoring.
Figure 2.1: IP-COM G3224P Front Panel Layout
This image displays the front panel of the IP-COM G3224P switch. On the left, the IP-COM logo and model number G3224P are visible. To the right, there are LED indicators for SYS, PoE MAX, and individual port status. A console port is also present. The main section features 24 Gigabit Ethernet RJ45 ports, arranged in two rows, with port numbers 1 through 24. On the far right, there are four SFP ports labeled SFP1, SFP2, SFP3, and SFP4, which are used for fiber optic uplinks.
2.3 Penunjuk LED
| Penunjuk LED | Status | Penerangan |
|---|---|---|
| SYS | Hijau (Pepejal) | Sistem beroperasi seperti biasa. |
| SYS | Hijau (Berkelip) | System is booting up or firmware is being upgraded. |
| PoE MAX | Merah (Pepejal) | PoE power budget is nearing or exceeding its limit. |
| Pautan/Akta (Setiap Pelabuhan) | Hijau (Pepejal) | Pelabuhan dipautkan. |
| Pautan/Akta (Setiap Pelabuhan) | Hijau (Berkelip) | Port is transmitting or receiving data. |
| PoE (Setiap Pelabuhan) | Kuning (Pepejal) | Kuasa PoE sedang dibekalkan kepada peranti yang disambungkan. |
3. Persediaan dan Pemasangan
3.1 Langkah Keselamatan
- Pastikan bekalan kuasa voltage matches the switch's requirements (240V as per specifications).
- Jangan menyekat bukaan pengudaraan.
- Jauhkan peranti daripada air, api dan suhu tinggi.
- Jangan cuba membuka atau membaiki peranti sendiri.
3.2 Pemasangan Rackmount
- Attach the provided rackmount brackets to the sides of the switch using the included screws.
- Pasangkan suis ke dalam rak peralatan standard 19 inci menggunakan skru rak yang sesuai (tidak disertakan).
- Ensure adequate airflow around the switch for proper cooling.
3.3 Pemasangan Desktop
- Pasangkan kaki getah yang disediakan pada bahagian bawah suis.
- Place the switch on a flat, stable surface with sufficient ventilation.
3.4 Menyambungkan Suis
- Sambungan Kuasa: Connect the power cord to the power inlet on the rear panel of the switch and then to a grounded power outlet.
- Peranti Rangkaian: Connect network devices (e.g., computers, servers, IP cameras, VoIP phones) to the RJ45 ports (1-24) on the front panel using standard Ethernet cables.
- Peranti PoE: For PoE-powered devices, simply connect them to any of the RJ45 ports. The switch will automatically detect and provide power if the device is PoE compliant.
- Sambungan Uplink: Use the SFP ports (SFP1-SFP4) for fiber optic uplinks to other network devices or the core network. Insert compatible SFP transceivers into the SFP slots before connecting fiber optic cables.
- Sambungan Konsol (Pilihan): For initial configuration or advanced management, connect a console cable from your computer to the console port on the switch.
4. Arahan Operasi
4.1 Kuasa Awal Hidup
After connecting the power cord, the switch will automatically power on. Observe the SYS LED indicator. It will blink during boot-up and turn solid green once the system is ready.
4.2 Kesambungan Rangkaian Asas
Once powered on, the switch will automatically detect connected devices. The Link/Act LED for each connected port will illuminate solid green, indicating a successful link. It will blink when data is being transmitted or received.
4.3 PoE Operation
When a PoE-compatible device is connected to a port, the switch will negotiate power delivery. The PoE LED for that port will turn yellow, indicating that power is being supplied. Monitor the PoE MAX LED; if it turns red, the total PoE power budget is being approached or exceeded, and you may need to reduce the number of PoE devices or use a higher-capacity power source.
4.4 Akses Pengurusan
The IP-COM G3224P is a managed switch, offering various configuration options via a web-based GUI, CLI (Command Line Interface) via the console port, or SNMP. Refer to the detailed management guide (usually available on the manufacturer's website) for advanced configuration, including VLANs, QoS, port mirroring, and security settings.
- Web GUI: Akses suis web interface by typing its default IP address (check the Quick Installation Guide or manufacturer's documentation) into a web pelayar.
- CLI: Connect via the console port using a terminal emulator (e.g., PuTTY) with appropriate serial port settings.
5. Penyelenggaraan
5.1 Pembersihan
- Regularly clean the exterior of the switch with a soft, dry cloth.
- Jangan gunakan pembersih cecair atau aerosol.
- Pastikan bukaan pengudaraan bebas daripada habuk dan halangan.
5.2 Kemas Kini Perisian Tegar
Periodically check the IP-COM official weblaman web untuk kemas kini perisian tegar. Mengemas kini perisian tegar memastikan prestasi, keselamatan dan akses kepada ciri baharu yang optimum. Ikut arahan yang disediakan dengan pakej kemas kini perisian tegar dengan teliti.
5.3 Pertimbangan Alam Sekitar
Ensure the switch operates within its specified environmental conditions (temperature, humidity) to prevent damage and ensure longevity.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No power / SYS LED off | Kord kuasa tidak disambungkan atau soket kuasa rosak. | Periksa sambungan kord kuasa. Cuba salur keluar kuasa yang berbeza. |
| No link on a port (Link/Act LED off) | Cable issue, device off, or incorrect port. | Check Ethernet cable. Ensure connected device is powered on. Try a different port or cable. |
| PoE device not powering on (PoE LED off) | Device not PoE compliant, cable issue, or power budget exceeded. | Verify device is PoE compliant. Check cable. Check PoE MAX LED; if red, reduce PoE load. |
| Network performance issues | Cable quality, network congestion, or incorrect configuration. | Use high-quality Ethernet cables. Check for network loops. Review switch configuration (VLANs, QoS). |
| Tidak boleh akses web antara muka pengurusan | Incorrect IP address, network settings, or firewall. | Verify the switch's IP address. Ensure your computer is on the same subnet. Disable temporary firewalls. |
If problems persist, consult the full product documentation or contact IP-COM technical support.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | G3224P |
| Pelabuhan | 24 x 10/100/1000Base-T (RJ45) with PoE+, 4 x 1000Base-X (SFP) |
| Kapasiti Penukaran | 56 Gbps |
| Kadar Pemajuan | 41.66 Mpps |
| Standard PoE | IEEE 802.3af / pada |
| Input Voltage | 240 Volt |
| Dimensi (L x W x H) | 29 x 44 x 44 cm |
| Berat badan | 15 Kilogram |
| Jumlah rak | ya |
| Pengurusan | Diuruskan (Web GUI, CLI, SNMP) |
Nota: Spesifikasi tertakluk kepada perubahan tanpa notis terlebih dahulu.
8. Waranti dan Sokongan Teknikal
8.1 Maklumat Waranti
IP-COM products typically come with a limited warranty. Please refer to the warranty card included with your product or visit the official IP-COM weblaman web untuk terma dan syarat jaminan terperinci khusus untuk rantau dan tarikh pembelian anda.
8.2 Sokongan Teknikal
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact IP-COM technical support. Support contact information can usually be found on the official IP-COM webtapak atau dalam pembungkusan produk.
IP-COM Official Webtapak: www.ip-com.com.cn
