1. Pengenalan
Thank you for choosing the Teknetics Tek-Point Pulse Induction Pinpointer. This device is designed to accurately locate metal objects in various environments, including soil, sand, and underwater. Its pulse induction technology provides enhanced sensitivity, especially in mineralized ground. Please read this manual thoroughly before operating your pinpointer to ensure proper use and to maximize its performance and longevity.
The Tek-Point is a fully waterproof pinpointer, submersible to 6 feet, making it suitable for both fresh and saltwater use. It features an LED light for low-light conditions and comes with a belt holster for convenient carrying.
2. Produk Lebihview
The Tek-Point pinpointer is engineered for precision and durability. Familiarize yourself with its main components and features.
Rajah 1: Teknetics Tek-Point Pulse Induction Pinpointer. This image displays the green-colored pinpointer, highlighting its compact design, the tip for detection, and the control button. A belt holster is also visible, indicating its portability.
Ciri-ciri Utama:
- Pulse Induction Technology: Provides superior depth and sensitivity, especially in challenging ground conditions.
- Reka bentuk kalis air: Fully submersible up to 6 feet (1.8 meters) for use in wet environments.
- Mod Pengesanan: Offers audible beep, vibration, or a combination of both for target indication.
- Lampu LED: Integrated LED for illuminating the target area in low-light conditions.
- Operasi Butang Tunggal: Simple and intuitive control for all functions.
- 3 Sensitivity Levels: Adjustable sensitivity to fine-tune detection for various target sizes and conditions.
- Lost Mode Alarm: An alarm feature to help locate the pinpointer if misplaced.
- Belt Holster: Included for convenient and secure carrying.
3. Persediaan
3.1 Pemasangan Bateri
The Tek-Point pinpointer requires one 9V battery (not included) for operation. Ensure the battery is fresh and correctly installed for optimal performance.
- Locate the battery cap at the rear end of the pinpointer.
- Unscrew the battery cap by turning it counter-clockwise.
- Insert a fresh 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the pinpointer's contacts.
- Carefully screw the battery cap back on clockwise until it is securely tightened. Ensure the O-ring seal is properly seated to maintain the waterproof integrity of the device.
Penting: Always ensure the battery cap is fully tightened before submerging the pinpointer in water to prevent water ingress and damage.
4. Arahan Operasi
4.1 Hidupkan/Mati Kuasa
- To turn on the pinpointer, press and hold the power button for approximately 1 second until you hear a short beep and/or feel a vibration. The LED light will also illuminate briefly.
- To turn off the pinpointer, press and hold the power button for approximately 2 seconds until you hear a longer beep and/or feel a longer vibration. The LED light will turn off.
4.2 Pelarasan Sensitiviti
The Tek-Point has 3 sensitivity levels. Adjusting the sensitivity allows you to optimize detection for different target sizes and ground conditions.
- With the pinpointer powered on, quickly press the power button repeatedly to cycle through the sensitivity levels.
- Each press will advance to the next sensitivity level, indicated by a series of short beeps/vibrations (e.g., one beep for Level 1, two for Level 2, three for Level 3).
- Level 1 is the lowest sensitivity, suitable for large targets or highly mineralized ground. Level 3 is the highest sensitivity, ideal for small targets or less mineralized ground.
4.3 Detection Modes (Beep, Vibrate, Both)
The pinpointer can be set to beep, vibrate, or both when a target is detected.
- To change the detection mode, press and hold the power button for approximately 3 seconds (after powering on, but before powering off). The pinpointer will cycle through the modes: Beep Only, Vibrate Only, Beep + Vibrate.
- Release the button when you reach your desired mode.
4.4 Lost Mode Alarm
If the pinpointer is left on and inactive for a period (typically 5 minutes), it will emit an audible alarm to help you locate it. This feature helps prevent accidental loss in the field.
4.5 Menggunakan Lampu LED
The integrated LED light automatically activates when the pinpointer is turned on, providing illumination for the target area. It will turn off when the pinpointer is powered off.
5. Penyelenggaraan
5.1 Pembersihan
- After each use, especially in wet or sandy conditions, rinse the pinpointer with fresh water.
- Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Ensure the battery cap area and O-ring are free of dirt and debris.
- Allow the pinpointer to air dry completely before storage.
5.2 Penjagaan Bateri
- Remove the battery if the pinpointer will not be used for an extended period to prevent leakage and damage.
- Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.
5.3 Penyimpanan
Store the pinpointer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided belt holster for protection during transport and storage.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pinpointer does not turn on. | Bateri mati atau tidak dipasang dengan betul. | Replace with a fresh 9V battery and ensure correct polarity. Check battery cap is tightened. |
| Weak or inconsistent detection. | Low battery; incorrect sensitivity setting; highly mineralized ground. | Replace battery. Adjust sensitivity level (try lower levels in mineralized ground). |
| False signals or chatter. | High sensitivity in noisy environments; electromagnetic interference. | Reduce sensitivity. Move away from power lines or other electronic devices. |
| Water ingress after submersion. | Battery cap not properly sealed or O-ring damaged. | Ensure battery cap is fully tightened before submersion. Inspect O-ring for damage and replace if necessary. |
7. Spesifikasi
- model: TEK-POINT
- Teknologi Pengesanan: Aruhan Nadi
- Tahan Air: Fully submersible to 6 feet (1.8 meters)
- Tahap Sensitiviti: 3 (Boleh Laras)
- Mod Pengesanan: Audio Beep, Vibration, Audio + Vibration
- Sumber Kuasa: 1x Bateri 9V (tidak termasuk)
- Ciri Bersepadu: LED Light, Lost Mode Alarm
- Bahan: Plastik Tahan Lama
- Dimensi: Kira-kira 10.3 x 3.3 x 2 inci (26.2 x 8.4 x 5.1 cm)
- Berat: Approximately 9.6 ounces (272 grams) without battery
- Aksesori yang disertakan: Sarung Tali Pinggang
8. Waranti dan Sokongan
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Teknetics webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Pengeluar: Teknetics
For further assistance, you may contact Teknetics customer service through their official channels. Details are typically available on the manufacturer's webtapak atau dalam pembungkusan produk.
