pengenalan
The Amazon Basics 4K HDMI 3 Port Switch allows you to connect up to three HDMI source devices to a single HDMI display, such as a TV or projector. This device is ideal for expanding the HDMI input capabilities of your display, enabling seamless switching between various entertainment or work devices. It supports 4K resolution at 30Hz and is HDCP compliant, ensuring compatibility with a wide range of modern equipment.
Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum digunakan.
- Jangan dedahkan peranti kepada kelembapan, suhu melampau atau cahaya matahari langsung.
- Use only the provided USB power cable.
- Jauhkan daripada kanak-kanak.
- Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel if needed.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Amazon Basics 4K HDMI 3 Port Switch
- USB Power Cable (for optional power)
- Remote Control (CR2025 battery not included)
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Produk Selesaiview
The HDMI switch features three input ports and one output port, along with a power input and an IR receiver for the remote control.
Imej: A terperinci view of the HDMI switch, highlighting the three HDMI input ports (INPUT1, INPUT2, INPUT3), one HDMI output port (OUTPUT), and the DC 5V power input.
Panel Depan
- LED KUASA: Menunjukkan status kuasa.
- LED1/LED2/LED3: Nyatakan input HDMI yang sedang aktif.
- SELECTION Button: Manually switch between HDMI inputs.
- Penerima IR: Menerima isyarat dari alat kawalan jauh.
Panel Belakang
- HDMI INPUT 1/2/3: Connect your source devices (e.g., game console, Blu-ray player, computer).
- OUTPUT HDMI: Connect to your display device (e.g., TV, projector, monitor).
- DC 5V: Power input port (optional for some setups, required for 4K resolution or longer cables).
Persediaan
Follow these steps to connect your HDMI switch:
- Sambungkan Peranti Sumber: Plug your HDMI source devices (e.g., gaming console, media player, computer) into the HDMI INPUT 1, 2, and 3 ports on the switch using HDMI cables (sold separately).
- Connect Display Device: Connect your TV, monitor, or projector to the HDMI OUTPUT port on the switch using an HDMI cable (sold separately).
- Connect Power (Optional/Recommended): Insert the small end of the included USB power cable into the DC 5V port on the switch. Plug the USB-A end into a USB power adapter (not included) or a USB port on your TV/computer. While the switch can draw power from HDMI sources, connecting the USB power cable is recommended for stable performance, especially with 4K resolutions or longer HDMI cables.
- Hidupkan kuasa: Ensure all connected devices and the display are powered on. The switch will automatically detect the active input or you can select it manually.
Image: The HDMI switch connected to a laptop via an HDMI input, with the output connected to a display (not fully visible). This illustrates a typical setup.
Beroperasi
The HDMI switch offers two methods for selecting inputs:
Penukaran Automatik
The switch is designed to automatically detect and switch to a newly activated HDMI source. If multiple sources are active, it will typically prioritize the lowest numbered input (Input 1, then Input 2, etc.) or the last active input.
Penukaran Manual
- Using the SELECTION Button: Press the 'SELECTION' button on the front panel of the switch to cycle through the available HDMI inputs (Input 1 → Input 2 → Input 3 → Input 1...). The corresponding LED will illuminate to indicate the active input.
- Menggunakan Alat Kawalan Jauh: Point the remote control towards the IR receiver on the front of the switch. Press the desired input number button (1, 2, or 3) to switch directly to that input. Ensure a CR2025 battery is installed in the remote control.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No picture/signal on display. |
|
|
| Picture flickers or drops out. |
|
|
| Alat kawalan jauh tidak berfungsi. |
|
|
| Automatic switching not working as expected. | Some devices maintain an active signal even when off, preventing auto-switching. | Use manual switching via the button on the switch or the remote control. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | AZSW3T1A-4K2K |
| Versi HDMI | HDMI 1.4 (Supports 4K@30Hz) |
| Pematuhan HDCP | HDCP 1.4 |
| Port Input | 3 x HDMI |
| Port Output | 1 x HDMI |
| Resolusi yang Disokong | Up to 4K (3840x2160) @ 30Hz, 1080p, 720p, etc. |
| Sokongan Audio | Menyokong pelbagai format audio |
| Bekalan Kuasa | DC 5V via USB (optional, USB cable included) |
| Kaedah Kawalan | Manual button, IR remote control |
| Dimensi (L x W x H) | 4.49 x 0.79 x 2.8 inci (11.4 x 2.0 x 7.1 cm) |
| Berat badan | 6.9 auns (195.6 gram) |
Penyelenggaraan
- Bersihkan peranti dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
- Keep the device free from dust and debris to ensure proper ventilation.
- Simpan di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk pegawai Amazon Basics weblaman web atau hubungi khidmat pelanggan Amazon secara langsung. Simpan resit pembelian anda untuk tuntutan jaminan.
