pengenalan
This manual provides instructions for the Amazon Basics 4K HDMI 5 Port Switch. This device allows you to connect up to five HDMI source devices to a single HDMI display, such as a TV or monitor, and switch between them easily. It supports 4K resolution at 30Hz and is HDCP compliant.
Maklumat Keselamatan
- Jangan dedahkan peranti kepada kelembapan atau suhu yang melampau.
- Jangan buka peranti. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Use only the provided USB power cable.
- Pastikan pengudaraan yang betul di sekeliling peranti.
Kandungan Pakej
- Amazon Basics 4K HDMI 5 Port Switch
- USB Power Cable (power only)
- Remote Control (CR2025 battery not included)
- Manual Pengguna
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Produk Selesaiview
The Amazon Basics 4K HDMI 5 Port Switch features five HDMI input ports and one HDMI output port. It includes a power input, an IR receiver for the remote control, and a manual selection button.
Imej: Atas ke bawah view of the HDMI switch, highlighting the five HDMI input ports (INPUT1-INPUT5), one HDMI output port, and the DC 5V power input.
Panel Depan
- LED KUASA: Menunjukkan status kuasa.
- INPUT LEDs (1-5): Indicate the currently selected input port.
- SELECTION Button: Press to manually cycle through input sources.
- Penerima IR: Untuk isyarat kawalan jauh.
Panel Belakang
- HDMI INPUT (1-5): Connect your HDMI source devices (e.g., game console, Blu-ray player, computer).
- OUTPUT HDMI: Connect to your HDMI display (e.g., TV, monitor, projector).
- DC 5V: Port input kuasa.
Persediaan
- Sambungkan Peranti Sumber HDMI: Plug up to five HDMI source devices (e.g., gaming consoles, media players, computers) into the HDMI INPUT ports (1-5) on the switch.
- Sambung ke Paparan: Connect an HDMI cable from the HDMI OUTPUT port on the switch to an HDMI input port on your TV, monitor, or projector.
- Sambungkan Kuasa: Plug the included USB power cable into the DC 5V port on the switch and connect the other end to a USB power source (e.g., a USB port on your TV or a USB wall adapter). The POWER LED on the switch will illuminate.
- Masukkan Bateri Jauh: Open the battery compartment of the remote control and insert a CR2025 battery (not included), ensuring correct polarity.
Image: The HDMI switch connected to a laptop via an HDMI cable, demonstrating a typical setup.
Arahan Operasi
Menukar Input
You can switch between connected HDMI sources using either the manual selection button on the device or the included remote control.
- Penukaran Manual: Press the "SELECTION" button on the front panel of the switch to cycle through the HDMI input ports (1-5). The corresponding INPUT LED will light up to indicate the active source.
- Penukaran Kawalan Jauh: Point the remote control towards the IR receiver on the front of the switch. Press the numbered buttons (1-5) on the remote to directly select the desired HDMI input port.
The switch does not feature automatic input sensing or switching. You must manually select the desired input.
Penyelenggaraan
- Bersihkan peranti dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
- Keep the device free from dust and debris to ensure proper ventilation.
- Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada isyarat pada paparan. | Input salah dipilih. Loose HDMI cables. Tiada kuasa pada suis. Source device not active. | Ensure the correct input is selected on the switch and your display. Periksa semua sambungan kabel HDMI. Verify the USB power cable is connected and the POWER LED is on. Pastikan peranti sumber dihidupkan dan mengeluarkan isyarat. |
| Picture flickering or poor quality. | Kabel HDMI rosak. Panjang kabel terlalu panjang. Ketidakserasian resolusi. | Cuba kabel HDMI yang berbeza. Ensure HDMI cables are within recommended length (e.g., under 10 ft for 4K). Verify your display and source device support the output resolution (e.g., 4K). |
| Alat kawalan jauh tidak berfungsi. | No battery or dead battery. Obstruction to IR receiver. Incorrect remote aim. | Insert a new CR2025 battery with correct polarity. Ensure a clear line of sight between the remote and the switch's IR receiver. Aim the remote directly at the IR receiver. |
Spesifikasi
- Dimensi Produk: 6.46 x 0.79 x 2.16 inci
- Berat Barang: 11.4 auns
- Nombor Model: AZSW5T1A-4K2K
- Jenis Penyambung: HDMI
- Pelabuhan Input: 5 x HDMI
- Port Output: 1 x HDMI
- Sokongan Resolusi: Sehingga 4K @ 30Hz
- Pematuhan HDCP: HDCP 1.4b
- Kuasa: DC 5V (via USB cable)
- Peranti Serasi: Computer, PS4, Xbox, Blu-ray DVD player, STB, Projectors, HDTVs, Apple TV, monitors, etc.
Waranti dan Sokongan
For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.
