Manual Pengguna Sistem Penggera Kereta Viper 3306V

pengenalan

Welcome to your Viper 3306V Car Alarm System. This manual provides essential information for the proper installation, operation, and maintenance of your new vehicle security system. The Viper 3306V offers advanced protection for your vehicle, featuring a 3-channel anti-assault system and two-way communication capabilities to enhance your vehicle's safety.

Please read this manual thoroughly before attempting any installation or operation to ensure optimal performance and to avoid potential damage or misuse.

Maklumat Keselamatan

• Pemasangan Profesional Disyorkan: For proper functionality and to prevent damage to your vehicle's electrical system, installation by a certified professional is highly recommended.
• Putuskan Bateri Kenderaan: Always disconnect the vehicle's negative battery terminal before beginning any installation work to prevent electrical shorts or damage.
• Elakkan Tampering: Do not attempt to modify or disassemble the alarm system components. This may void your warranty and could lead to system malfunction.
• Pendawaian Selamat: Ensure all wiring is properly routed, secured, and insulated to prevent chafing, short circuits, and interference with vehicle operations.
• Siren Placement: Mount the siren in a location that is protected from water and heat, and where its sound is not obstructed.

Kandungan Pakej

Verify that all components are present in your Viper 3306V Car Alarm System package:

• Viper 3306V Main Control Unit
• Two (2) Remote Controls
• Siren
• Penderia Kejutan
• Pemasangan Pendawaian
• Manual Pengguna (dokumen ini)

Image: Viper 3306V Car Alarm System components. This image displays the main control unit, two remote controls, the siren, and a sensor, which are typically included in the package.

Persediaan dan Pemasangan

The installation of the Viper 3306V Car Alarm System requires knowledge of automotive electrical systems. It is strongly recommended that this system be installed by an authorized Viper dealer or a qualified automotive electronics technician.

Langkah Pemasangan Umum (untuk rujukan profesional):

1. Pasang Unit Utama: Secure the main control unit in a hidden, dry location within the vehicle, away from excessive heat or moisture.
2. Sambungkan Kuasa dan Tanah: Connect the main power and ground wires according to the detailed wiring diagram provided with the installation guide (typically separate from this user manual).
3. Install Siren: Mount the siren in the engine compartment, facing downwards to prevent water accumulation, and away from moving parts or extreme heat.
4. Install Sensor: Mount the shock sensor securely to a solid surface inside the vehicle. Adjust sensitivity as needed after installation.
5. Connect Vehicle Inputs/Outputs: Connect the alarm system's input and output wires to the vehicle's door triggers, ignition, parking lights, and other relevant circuits as per the installation guide.
6. Program Remote Controls: Follow the programming instructions to link the remote controls to the main unit.
7. Sistem Ujian: Thoroughly test all functions of the alarm system, including arming, disarming, sensor triggers, and anti-assault features.

Arahan Operasi

Your Viper 3306V system is designed for intuitive operation using the provided remote controls.

Mempersenjatai Sistem:

• Tekan ke KUNCI button on your remote control. The system will chirp once, and the parking lights will flash once, indicating the system is armed. The doors will lock (if connected).
• The two-way remote will confirm the armed status.

Melucutkan senjata Sistem:

• Tekan ke BUKA KUNCI button on your remote control. The system will chirp twice, and the parking lights will flash twice, indicating the system is disarmed. The doors will unlock (if connected).
• The two-way remote will confirm the disarmed status.

Anti-Assault (SRV) Feature:

The anti-assault feature provides an additional layer of security. Consult your installer for specific activation and deactivation procedures, as this feature may be configured differently based on your preferences.

• Typically, this feature can be activated manually or automatically under certain conditions (e.g., ignition on, door opened).
• When activated, the system may trigger the siren and flash the lights to deter an assailant.

Mod Panik:

• To activate panic mode, press and hold the KUNCI or BUKA KUNCI button (or a dedicated panic button if configured) for approximately 3 seconds. The siren will sound, and the parking lights will flash.
• To deactivate panic mode, press any button on the remote control.

Penyelenggaraan

• Bateri Kawalan Jauh: The remote controls are powered by non-standard batteries. When the remote's range decreases or its display (for two-way remotes) becomes dim, it is time to replace the batteries. Refer to the remote's specific instructions for battery replacement.
• Pembersihan Sensor: Keep the shock sensor and any other external sensors (if installed) clean and free from debris to ensure accurate detection.
• Pemeriksaan Sistem: Periodically test your alarm system by arming it and then gently shaking the vehicle or opening a door to ensure the siren activates.
• Elakkan Pendedahan Air: Keep the main unit and remote controls away from water or excessive moisture.

Menyelesaikan masalah

If you experience issues with your Viper 3306V system, consider the following common troubleshooting steps:

• System Not Arming/Disarming:
  • Periksa bateri kawalan jauh.
  • Ensure you are within the remote's operating range.
  • Verify all doors, hood, and trunk are closed properly.
• Penggera Palsu:
  • The shock sensor sensitivity may be set too high. Consult your installer for adjustment.
  • Check for loose items inside the vehicle that could trigger the sensor.
  • Ensure the vehicle is parked in a stable location, away from heavy vibrations.
• Siren Tidak Berbunyi:
  • Check the siren's wiring connections.
  • Ensure the siren is not obstructed or damaged.
• Alat Kawalan Jauh Tidak Menjawab:
  • Gantikan bateri kawalan jauh.
  • If the remote was dropped or damaged, it might need replacement or re-programming.

For persistent issues or complex problems, it is recommended to contact an authorized Viper dealer or a professional automotive electronics technician.

Spesifikasi

Waranti dan Sokongan

Your Viper 3306V Car Alarm System is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.

For technical assistance, installation questions, or warranty service, please contact your authorized Viper dealer or visit the official Viper webtapak untuk sumber sokongan dan maklumat hubungan.