Yaheetech Horizontal Barbell Bumper Plate Rack Holder Olympic Bar Storage Rack YT-00073058 User Manual

1. Pengenalan dan Selesai Produkview

This manual provides essential information for the safe assembly, operation, and maintenance of your Yaheetech Horizontal Barbell Bumper Plate Rack Holder. This rack is designed to organize and store Olympic-sized barbell bumper plates and Olympic bars, featuring a mobile design with wheels and a handle for convenient relocation.

Imej 1: Keseluruhan view of the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.

Ciri-ciri Utama:

• Dimensi: 37 x 13 x 11 inches (LxWxH).
• Maks. Kapasiti: 300 Lb (136 kg).
• Bahan: Powder-coated steel frame for resistance to sweat, moisture, and rust.
• Plate Slots: Includes 4 slots, each approximately 5.5 inches wide, to accommodate various bumper plate sizes.
• Mobiliti: Equipped with two 2.6-inch diameter rolling wheels and a sweat-resistant handle for easy movement.
• Bar Holders: Two vertical holders for Olympic bars.

2. Maklumat Keselamatan

Please read and understand all safety instructions before assembling or using the product. Failure to follow these instructions may result in injury or damage to the product.

• Had Berat: Do not exceed the maximum weight capacity of 300 Lb (136 kg). Overloading can cause structural failure and injury.
• Perhimpunan: Ensure all bolts, nuts, and components are securely tightened before use. Periodically check for tightness.
• Permukaan Stabil: Sentiasa letakkan rak di atas permukaan yang rata, stabil dan rata untuk mengelakkannya daripada terbalik.
• Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan daripada rak semasa pemasangan dan penggunaan.
• Menggerakkan Rak: When moving the rack, ensure plates and bars are securely seated. Use the handle and wheels for controlled movement. Avoid sudden stops or turns when heavily loaded.
• Pemeriksaan: Before each use, inspect the rack for any signs of damage, loose parts, or wear. Do not use if damaged.
• Pemuatan yang betul: Distribute weight evenly across the plate slots to maintain balance and stability.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan. Jika mana-mana bahagian yang hilang atau rosak, hubungi sokongan pelanggan.

• Bingkai Utama (1)
• Plate Dividers (4)
• Vertical Bar Holders (2)
• Pemasangan Pemegang (1)
• Roda (2)
• Hardware Pack (Bolts, Washers, Nuts, Wrenches)

4. Arahan Perhimpunan

Follow these steps carefully to assemble your barbell bumper plate rack.

1. Buka Pembungkusan Komponen: Keluarkan semua bahagian dari pembungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan rata. Semak pada senarai kandungan pakej.
2. Pasang Roda: Secure the two wheels to the designated points on one end of the main frame using the provided bolts and wrenches. Ensure they are firmly attached and can rotate freely.
3. Pemegang Pasang: Attach the handle assembly to the opposite end of the main frame. Align the holes and secure with the appropriate bolts, washers, and nuts. Tighten securely.
4. Insert Plate Dividers: Slide the four plate dividers into their respective slots on the main frame. These should fit snugly to create the plate storage sections.
5. Mount Bar Holders: Attach the two vertical bar holders to the main frame, typically near the wheeled end. Secure them with the provided hardware.
6. Semakan Akhir: Once all components are assembled, double-check all bolts and nuts to ensure they are fully tightened. Gently rock the rack to confirm stability.

Imej 2: Jarak dekat view of the rack's handle, designed for comfortable grip during movement.

Image 3: Detail of the vertical Olympic bar holders and one of the rolling wheels.

5. Arahan Operasi

This section details how to properly load and move your Yaheetech Barbell Bumper Plate Rack.

• Loading Plates: Carefully place bumper plates into the designated slots. It is recommended to load heavier plates towards the center or bottom of the rack for better stability. Distribute weight as evenly as possible across the four slots.
• Storing Bars: Insert Olympic barbells vertically into the two bar holders. Ensure the bars are fully seated and stable.
• Menggerakkan Rak: To move the rack, grasp the handle firmly. Tilt the rack slightly to engage the wheels, lifting the non-wheeled end off the ground. Roll the rack to your desired location. Avoid dragging the rack without using the wheels.
• penempatan: Always position the rack on a flat, stable surface away from high-traffic areas to prevent accidental tipping.

Image 4: The rack fully loaded with bumper plates and barbells, showcasing kapasiti penyimpanannya.

Image 5: A closer look at bumper plates neatly organized within the rack's slots.

6. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your plate rack.

• Pembersihan: Lap bingkai keluli dengan iklanamp kain untuk menghilangkan habuk dan peluh. Elakkan pembersih yang kasar yang boleh merosakkan salutan serbuk.
• Pemeriksaan perkakasan: Periodically (e.g., monthly) inspect all bolts, nuts, and connections. Tighten any loose hardware to maintain structural integrity.
• Pemeriksaan Roda: Check the wheels for any debris or damage that might impede smooth rolling. Clean as necessary.
• Pencegahan Karat: The powder-coated steel is resistant to rust, but prolonged exposure to high humidity or moisture should be avoided. If scratches occur, touch up with rust-inhibiting paint.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your plate rack.

8. Spesifikasi

Detailed technical specifications for the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.

Image 6: Dimensional diagram of the plate rack, illustrating key measurements.

9. Waranti dan Sokongan

Produk Yaheetech dihasilkan mengikut piawaian berkualiti tinggi. Untuk maklumat jaminan khusus, sila rujuk dokumentasi yang disertakan dengan pembelian anda atau lawati laman web rasmi Yaheetech. webtapak.

If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact Yaheetech customer support through the retailer where the product was purchased or via the contact information provided on the official Yaheetech webtapak.

• Sokongan dalam talian: melawat www.yaheetech.shop (or your regional Yaheetech website) for FAQs and contact options.
• Perkhidmatan Pelanggan: Refer to your purchase receipt or product packaging for direct customer service contact details.