OSRAM Encelium SCP-0450 PIR Occupancy Sensor User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the OSRAM Encelium SCP-0450 PIR Occupancy Sensor. This device is designed to detect motion using passive infrared technology, enabling automated control of lighting or other systems in commercial and industrial environments.

The SCP-0450 is a 24V ceiling-mount sensor offering a 360-degree sensing angle and up to 450 feet of coverage, making it suitable for large areas.

1.1 Ciri-ciri Utama

• 24 Volt Power Pack Required
• Pemasangan Pemasangan Siling
• 450 Feet of Coverage (Passive Infrared)
• 360 Degree Sensing Angle
• Kemasan Putih

1.2 Kandungan Pakej

• 1 x OSRAM Encelium SCP-0450 PIR Occupancy Sensor
• Panduan Pemasangan (dokumen ini)

2. Maklumat Keselamatan

Please read all safety instructions before installing or operating the sensor. Failure to follow these instructions may result in electric shock, fire, or property damage.

• Bahaya Elektrik: Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik nasional dan tempatan.
• Pemutusan Kuasa: Always disconnect power at the circuit breaker or fuse box before performing any wiring or service.
• Voltage Keperluan: This device requires a 24 Volt power pack. Do not connect to higher voltage bekalan.
• Penggunaan Dalaman Sahaja: This sensor is designed for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
• Pemasangan: Ensure the mounting surface is structurally sound and can support the weight of the sensor.

3. Persediaan dan Pemasangan

The OSRAM Encelium SCP-0450 sensor is designed for ceiling mount installation. Proper placement is crucial for optimal performance.

3.1 Memilih Lokasi Pemasangan

• Select a central location on the ceiling to maximize the 360-degree sensing angle and 450 feet of coverage.
• Avoid placing the sensor near heat sources (e.g., HVAC vents, incandescent lights) or in direct sunlight, as these can cause false triggers.
• Ensure there are no obstructions (e.g., tall shelves, partitions) that could block the sensor's line of sight to the detection area.

3.2 Arahan Pendawaian

1. Matikan kuasa: Before beginning any wiring, ensure power to the circuit is OFF at the breaker.
2. Prepare wiring: Route the 24V low-voltage wiring from the required 24V power pack to the chosen ceiling mount location.
3. Sambung wayar: Connect the sensor's wires to the 24V power pack output according to the wiring diagram provided with your power pack. Typically, this involves connecting the positive (+) and negative (-) terminals. Refer to the specific wiring diagram for your Encelium system components.
4. Sambungan selamat: Pastikan semua sambungan wayar selamat dan terlindung dengan betul.

3.3 Memasang Penderia

1. Pasangkan pendakap pelekap: Secure the sensor's mounting bracket (if applicable, typically integrated) to the ceiling using appropriate screws and anchors.
2. Penderia kedudukan: Carefully attach the sensor body to the mounting bracket, ensuring it is firmly seated.
3. Verify orientation: Ensure the sensor is oriented correctly for optimal coverage of the desired area.

Rajah 1: Atas view of the OSRAM Encelium SCP-0450 PIR Occupancy Sensor. This image shows the sensor's dome-shaped lens for 360-degree motion detection.

Rajah 2: Bersudut view of the OSRAM Encelium SCP-0450 PIR Occupancy Sensor. This image highlights the compact, white design suitable for ceiling installation.

4. Arahan Operasi

The OSRAM Encelium SCP-0450 is a passive infrared (PIR) occupancy sensor. It operates by detecting changes in infrared radiation caused by the movement of people within its detection zone.

4.1 Menghidupkan

Once installation and wiring are complete, restore power to the circuit at the breaker. The sensor will typically undergo a brief warm-up period (e.g., 30-60 seconds) during which it may not respond to motion or may exhibit inconsistent behavior. Refer to your Encelium system's main controller documentation for specific warm-up indicators.

4.2 Pengesanan Pergerakan

The sensor continuously monitors its 360-degree coverage area for motion. When motion is detected, it sends a signal to the connected Encelium lighting control system or other compatible devices. The system then responds according to its programmed settings (e.g., turning lights on, adjusting light levels).

The sensor's effectiveness is highest when detecting motion across its field of view rather than directly towards or away from it.

4.3 Coverage Area

The SCP-0450 provides up to 450 feet of coverage. The actual effective range can vary based on ceiling height, ambient temperature, and the type of motion being detected. For optimal performance, ensure the sensor is positioned to cover the primary areas of activity.

5. Penyelenggaraan

The OSRAM Encelium SCP-0450 sensor requires minimal maintenance to ensure continued optimal performance.

• Pembersihan: Periodically clean the sensor lens with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the lens or internal components.
• Pemeriksaan: Annually inspect the sensor for any physical damage or loose connections. Ensure the mounting is secure.
• Tiada Bahagian Boleh Servis Pengguna: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit. Contact qualified personnel for service.

6. Penyelesaian masalah

If the sensor is not performing as expected, review isu dan penyelesaian biasa berikut:

If problems persist after attempting these solutions, contact OSRAM technical support or a qualified service professional.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, technical support, or service inquiries regarding your OSRAM Encelium SCP-0450 sensor, please refer to the official OSRAM Encelium weblaman web atau hubungi sokongan pelanggan mereka secara langsung. Terma dan syarat jaminan khusus mungkin berbeza mengikut wilayah dan tarikh pembelian.

Please have your product model number (SCP-0450) and purchase details available when contacting support.