OSRAM SCP-1500

OSRAM Encelium SCP-1500 PIR Occupancy Sensor User Manual

Model: SCP-1500

1. Pengenalan

The OSRAM Encelium SCP-1500 is a 24V ceiling-mount Passive Infrared (PIR) occupancy sensor designed for efficient lighting control. This sensor detects motion within its coverage area, automatically controlling connected lighting or other systems to save energy. It features a 360-degree sensing angle and a maximum coverage range of 1500 feet, making it suitable for various commercial and industrial applications.

This manual provides detailed instructions for the installation, operation, and maintenance of your SCP-1500 sensor.

2. Maklumat Keselamatan

3. Kandungan Pakej

Sahkan bahawa semua item hadir sebelum memulakan pemasangan:

4. Persediaan dan Pemasangan

4.1 Pre-installation Considerations

4.2 Memasang Penderia

  1. Putuskan Kuasa: Before starting, ensure power to the installation area is turned off at the circuit breaker.
  2. Pilih Lokasi: Identify the optimal ceiling location for 360-degree coverage.
  3. Sediakan Pendawaian: Route the 24V low-voltage wiring from the power pack to the chosen mounting location.
  4. Pangkalan Selamat: Use the provided mounting hardware to securely attach the sensor's base to the ceiling.
  5. Sambungan Wayar: Connect the 24V power and control wires to the sensor terminals as per the wiring diagram provided with your power pack or system controller. Ensure correct polarity.
  6. Attach Sensor Body: Once wiring is complete and secure, attach the main sensor body to the mounted base, typically by twisting or snapping it into place.
  7. Pulihkan Kuasa: After installation is complete and all connections are secure, restore power to the circuit.
OSRAM Encelium SCP-1500 PIR Occupancy Sensor, top view

Rajah 1: Atas view of the OSRAM Encelium SCP-1500 PIR Occupancy Sensor. This image shows the sensor's dome-shaped design with the central PIR lens, indicating its ceiling-mount orientation.

OSRAM Encelium SCP-1500 PIR Occupancy Sensor, side view

Rajah 2: Sisi view of the OSRAM Encelium SCP-1500 PIR Occupancy Sensor. This image highlights the low-profile design and the slight protrusion of the PIR lens from the main body.

5. Operasi

The OSRAM Encelium SCP-1500 sensor operates using Passive Infrared (PIR) technology to detect changes in infrared radiation caused by human movement. When motion is detected within its 360-degree coverage area (up to 1500 feet), the sensor signals the connected lighting control system to activate or maintain lighting.

Note: Specific delay times and sensitivity adjustments are typically configured through the connected Encelium lighting control system, not directly on the SCP-1500 sensor itself. Refer to your Encelium system documentation for configuration details.

6. Penyelenggaraan

Sentiasa putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan.

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Sensor tidak mengesan gerakan.
  • Tiada kuasa pada sensor.
  • Pendawaian yang tidak betul.
  • Sensor lens obstructed.
  • Sensor mounted too high or too low for effective coverage.
  • PIR lens is dirty.
  • Verify 24V power supply is active.
  • Check wiring connections against the system diagram.
  • Remove any obstructions from the sensor's field of view.
  • Review mounting location and adjust if necessary.
  • Bersihkan kanta sensor.
Lights turn on/off unexpectedly (false triggers).
  • Sensor mounted near heat sources (HVAC vents, direct sunlight).
  • Movement outside the intended detection zone.
  • High sensitivity setting on the connected control system.
  • Relocate sensor away from heat sources or drafts.
  • Adjust sensor aiming or use masking if available (check system documentation).
  • Adjust sensitivity settings on the connected Encelium control system.
Sensor is powered but lights do not respond.
  • Issue with the connected 24V power pack or lighting control system.
  • Control wiring fault.
  • Verify the power pack and control system are functioning correctly.
  • Check control wiring connections between the sensor and the system.

If the problem persists after attempting these solutions, contact OSRAM technical support or a qualified electrician.

8. Spesifikasi

Nombor ModelSCP-1500
JenamaOSRAM Encelium
Sumber Kuasa24 Volts (Power Pack Required)
Jenis SensorPassive Infrared (PIR) Occupancy Sensor
Jenis PemasanganPemasangan Siling
Sudut Penderiaan360 Darjah
Maximum Coverage Range1500 Kaki
warnaputih
Berat Barang1 Pound (approx.)
Dimensi Produk5 x 5 x 3 inci (lebih kurang)
UPC046135453649

9. Waranti dan Sokongan

For warranty information, please refer to the documentation provided with your purchase or visit the official OSRAM Encelium website. OSRAM provides technical support for its products.

If you require assistance with installation, troubleshooting, or have questions about your SCP-1500 sensor, please contact OSRAM customer support through their official channels.

Rasmi OSRAM Webtapak: www.osram.com

Dokumen Berkaitan - SCP-1500

Praview ENCELIUM Penderia Penghunian Dipasang di Siling: Ciri, Spesifikasi dan Pemasangan
Maklumat terperinci tentang penderia penghunian dipasang di siling ENCELIUM, termasuk model Infra-Merah Pasif (PIR) dan Ultrasonik (U/S). Meliputi ciri, faedah, aplikasi, maklumat pesanan, spesifikasi teknikal, gambar rajah pendawaian, pemasangan dan waranti.
Praview Panduan Pemasangan Penderia Occupancy OSRAM ENCELIUM dan Maklumat Produk
Arahan pemasangan, ciri, operasi dan penyelesaian masalah yang komprehensif untuk penderia penghunian OSRAM ENCELIUM dan pek kuasa, termasuk model yang dipasang di dinding, dipasang di siling dan jenis suis.
Praview OSRAM Wireless Area Lighting Control Module (WALC) Wiring and Installation Manual
Detailed wiring and installation guide for the OSRAM Wireless Area Lighting Control Module (WALC), covering setup, configurations, safety precautions, and regulatory information for the ENCELIUM® Networked Light Management System.
Praview Modul Kawalan Pencahayaan Kawasan Wayarles OSRAM (WALC) EN-ALC-ZB-BK Helaian Data & Panduan Pemasangan
Lembaran data dan panduan pemasangan yang komprehensif untuk OSRAM Wireless Area Lighting Control Module (WALC) model EN-ALC-ZB-BK. Mempunyai kawalan wayarles ZigBee®, pemalapan 0-10V, kapasiti beban 20A dan keserasian dengan sistem ENCELIUM®.
Praview OSRAM Wireless Wallstations Wiring and Installation Manual
Comprehensive guide to installing and wiring OSRAM Wireless Wallstations, featuring ENCELIUM compatibility, battery operation, and installation instructions for various device boxes and decorator plates.
Praview OSRAM Retractable Ceiling Fan 1070 66W WT - User Manual and Specifications
Detailed user manual and specifications for the OSRAM Retractable Ceiling Fan 1070 66W WT, covering installation, operation, maintenance, and safety guidelines.