Amazon Basics DS-110SAM Small Slim Desk Laci Manual Keselamatan Pengguna Keselamatan

pengenalan

This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.

Maklumat Keselamatan Penting

• Jangan simpan kunci ganti kecemasan di dalam peti besi. Simpan mereka di lokasi yang selamat dan berasingan.
• Pastikan peti besi dipasang dengan selamat untuk mengelakkan pengalihan tanpa kebenaran.
• This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
• Keep the keypad dry and clean. Avoid using abrasive cleaners.

Kandungan Pakej

• Amazon Basics DS-110SAM Security Safe
• Kekunci Ganti Kecemasan (2)
• Perkakasan Pemasangan (skru, sauh)
• Manual Arahan (dokumen ini)

Persediaan

1. Pemasangan Bateri

1. Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
2. Cari petak bateri di bahagian dalam pintu selamat.
3. Masukkan 4 bateri AA baharu, pastikan kekutuban yang betul (+/-).
4. Tutup penutup petak bateri.

2. Menetapkan Kod Peribadi Anda

Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
2. On the keypad, enter your new personal code (3 to 8 digits).
3. Tekan dan tahan the '#' button to confirm. You will hear a confirmation beep.
4. Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.

3. Memasang Peti Keselamatan

For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.

Image: Back of the safe with pre-drilled mounting holes.

1. Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
2. Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
3. Drill pilot holes into the surface.
4. Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.

Image: The safe positioned within a desk drawer, demonstrating its intended use.

Mengendalikan Peti Deposit Keselamatan

Imej: Depan view of the safe, highlighting the electronic keypad and locking mechanism.

1. Opening with Electronic Keypad

1. Enter your personal code (3 to 8 digits).
2. Press the '#' button. The green light will illuminate.
3. Dalam masa 5 saat, putar tombol mengikut arah jam untuk membuka pintu selamat.

2. Opening with Emergency Override Key

Use this method if you forget your code or if the batteries are depleted.

Image: Close-up of the keypad with an emergency key in use.

1. Gently remove the keypad cover to reveal the keyhole.
2. Masukkan salah satu kunci ganti kecemasan ke dalam lubang kunci.
3. Turn the key clockwise and simultaneously turn the knob to open the safe door.
4. Once open, you can replace the batteries if needed or reset your code.

3. Menutup dan Mengunci Peti besi

1. Tutup pintu selamat.
2. Putar tombol lawan arah jam untuk memasang bolt pengunci. Peti besi kini terkunci.

Image: Detail of the live-door bolts, which provide security when the safe is locked.

Penyelenggaraan

1. Penggantian Bateri

When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.

2. Pembersihan

Lap bahagian luar peti besi dengan lembut, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.

Menyelesaikan masalah

• Peti besi tidak dibuka dengan kod:
  • Pastikan bateri segar dan dipasang dengan betul.
  • Verify you are entering the correct code and pressing '#' firmly.
  • Try using the emergency override key.
• Pad kekunci tidak bertindak balas:
  • Gantikan bateri.
  • Pastikan tiada serpihan yang menghalang butang.
• Pintu tidak ditutup dengan betul:
  • Check for any obstructions inside the safe or around the door frame.
  • Ensure the locking bolts are fully retracted before attempting to close.

Spesifikasi

Maklumat Waranti

For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics webtapak. Terma dan syarat jaminan mungkin berbeza.

Sokongan Pelanggan

If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official webtapak atau maklumat hubungan yang diberikan bersama pembelian anda.