Manual Pengguna Casis ATX Phanteks Enthoo Pro

1. Pengenalan

Thank you for choosing the Phanteks Enthoo Pro ATX Chassis. This manual provides essential information for setting up, operating, and maintaining your new computer case. The Enthoo Pro is designed for enthusiasts, offering extensive cooling possibilities, multiple radiator support, and upgrade capabilities, all housed within a sleek design featuring a tempered glass side panel.

For a comprehensive guide and additional details, please refer to the official Manual Pengguna (PDF).

Figure 1.1: Phanteks Enthoo Pro ATX Chassis, showcasing its tempered glass side panel and brushed aluminum look.

2. Ciri-ciri Utama

• Brushed aluminum Look: Aesthetic design with a clean interior, featuring hidden PSU and HDDs.
• Panel Kaca Terbaja: Menyediakan yang jelas view daripada komponen dalaman.
• Easy Accessibility: Convenient access to fans and dust filters for maintenance.
• Pengurusan Kabel: Equipped with Phanteks' Velcro cable ties for organized routing.
• Optical Drive Bay: Includes space for optical drives.
• Reservoir Mounts and Pump Slots: Designed for custom liquid cooling solutions.
• Pelabuhan hadapan: Features 2 x USB 3.0, USB-C GEN 2, Mic, Headphone, Reset, and RGB Switch.
• RGB Lighting Compatibility: Compatible with Phanteks RGB LED strips and RGB motherboards.
• Easy Radiator Installation: Streamlined process for installing radiators.

Figure 2.1: Spacious interior of the Enthoo Pro chassis, highlighting cable management options and component layout.

3. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej anda:

• Phanteks Enthoo Pro ATX Chassis (PH-ES614PTG_BK)
• Accessory Box (containing screws, standoffs, cable ties)
• Pre-installed Fans (typically 2 x 140mm and 1 x 120mm, exact configuration may vary)
• User Manual (this document and/or PDF version)

4. Panduan Persediaan

Follow these steps for initial setup and component installation:

1. Penyediaan: Place the chassis on a stable, flat surface. Remove the tempered glass side panel by unscrewing the four thumb screws and carefully lifting it away.
2. Pemasangan Papan Induk: Install the necessary motherboard standoffs. Carefully align your ATX motherboard with the standoffs and secure it with screws.
3. Pemasangan Unit Bekalan Kuasa (PSU): Install your PSU into the dedicated compartment at the bottom rear of the chassis. Secure it with screws from the rear.
4. Pemasangan Pemacu Storan: The chassis supports multiple drive types. Utilize the 3.5" HDD cages and 2.5" SSD mounts. The lower cage can house 3 HDDs, and there are dedicated SSD mounts behind the motherboard tray.

Rajah 4.1: Terperinci view of the drive bays, illustrating the ample storage options within the chassis.

5. Pemasangan Kad Pengembangan: Install your graphics card and other expansion cards into the PCIe slots on your motherboard, securing them with the provided screws.
6. Pengurusan Kabel: Utilize the numerous cable routing cutouts and Phanteks' Velcro ties behind the motherboard tray to ensure a clean and organized build. This improves airflow and aesthetics.

Figure 4.2: Rear of the motherboard tray, showcasing the cable management channels and Velcro ties for a tidy build.

7. Pemasangan Sistem Penyejukan: Install additional fans or liquid cooling radiators as desired. The case supports various configurations for optimal airflow.
8. Sambungan Panel Depan: Connect the front panel cables (USB 3.0, USB-C, audio, power, reset, RGB switch) to their respective headers on your motherboard.
9. Perhimpunan Akhir: Once all components are installed and cables are managed, reattach the tempered glass side panel and secure it with the thumb screws.

5. Arahan Operasi

The Phanteks Enthoo Pro chassis is designed for straightforward operation. Key operational features include:

• Butang Kuasa: Located on the top panel, press to power on or off your system.
• Port I/O Depan: Access USB 3.0, USB-C GEN 2, microphone, and headphone jacks conveniently located on the front panel.

Figure 5.1: Front panel connectivity, including USB 3.0, USB-C, and audio ports, hidden behind a discreet cover.

• Kawalan Pencahayaan RGB: If connected to a compatible Phanteks RGB controller or motherboard, use the dedicated RGB switch on the front panel to cycle through lighting modes or synchronize with your motherboard's software.
• Kawalan Kipas: Fan speeds are typically controlled via your motherboard's BIOS/UEFI settings or dedicated fan control software.

6. Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your chassis:

• Pembersihan Penapis Habuk: The Enthoo Pro features easily removable dust filters on the top, front, and bottom. Regularly remove and clean these filters with water or a soft brush to maintain optimal airflow and prevent dust buildup inside your system.
• Pembersihan Luaran: Lap permukaan luar dengan lembut, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Interior Dusting: Periodically use compressed air to remove dust from internal components, ensuring efficient cooling.

7. Penyelesaian masalah

If you encounter issues with your chassis, consider the following common troubleshooting steps:

• Tiada Kuasa: Ensure the PSU is properly connected to the motherboard and all components. Check the power button connection to the motherboard.
• Peminat Tidak Berputar: Verify fan connections to the motherboard or fan controller. Check BIOS/UEFI settings for fan speed control.
• Isu Pencahayaan RGB: Confirm RGB cable connections to the motherboard or controller. Ensure compatible software is installed and configured correctly.
• Port Panel Hadapan Tidak Berfungsi: Double-check that all front panel I/O cables are securely connected to the correct headers on your motherboard.

For more complex issues, consult the full user manual or contact Phanteks customer support.

8. Spesifikasi

9. Waranti dan Sokongan

Phanteks products are manufactured to the highest quality standards. For detailed warranty information, product registration, and technical support, please visit the official Phanteks webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk tuntutan waranti.