Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle Instruction Manual

1. Produk Lebihview

The Sapphire Octa Series Modern Cabinet Handle (Model: SP-2044A-192-ORB) is designed to complement various home storage aesthetics. This handle features a straight, flat-faced design with subtle bevelling and layered handle feet, providing an easy-to-grab and functional accent for cabinetry.

Ciri-ciri utama termasuk:

• Oil-rubbed Bronze finish.
• Constructed from durable zinc material.
• Part of the Sapphire modern collection.
• Measures 7.56 inches (192mm) in length.
• Projects 0.5 inches from the cabinet surface.

Figure 1: Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle. This image displays the Sapphire Octa Series Modern Cabinet Handle, featuring a straight, flat-faced design with subtle bevelling and layered handle feet. The handle is shown in an oil-rubbed bronze finish.

2. Persediaan dan Pemasangan

This cabinet handle is designed for easy installation. Basic tools are required (not included).

2.1 Komponen yang Disertakan

• 1 x Sapphire Octa Series Cabinet Handle
• 2 x Skru Pemasangan

2.2 Recommended Tools (Not Included)

• Pita pengukur atau pembaris
• Pensel
• Drill with appropriate drill bit (typically 3/16" or 5mm for cabinet hardware)
• Screwdriver (Phillips head or flathead, depending on screw type)

2.3 Langkah Pemasangan

1. Ukur dan Tandakan: Determine the desired location for the handle on your cabinet door or drawer. Use a measuring tape to mark the two screw hole centers. The handle has a center-to-center measurement of 192mm (7.56 inches).
2. Gerudi Lubang Juruterbang: Carefully drill pilot holes through the marked points. Ensure the drill bit size is appropriate for the mounting screws to prevent splitting the wood.
3. Lampirkan Pemegang: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door/drawer through the pilot holes and into the handle posts.
4. selamat: Tighten the screws firmly with a screwdriver until the handle is securely attached. Avoid over-tightening, which can strip the screws or damage the cabinet material.

3. Arahan Operasi

The Sapphire Octa Series Cabinet Handle functions as a pull for opening and closing cabinet doors and drawers. Simply grasp the handle and apply gentle force in the desired direction to operate the cabinet mechanism.

4. Penyelenggaraan

To maintain the appearance and functionality of your Sapphire cabinet handle, follow these guidelines:

• Pembersihan: Lap pemegang dengan kerap dengan lembut, damp cloth. For stubborn marks, use a mild soap solution and immediately dry with a clean, soft cloth.
• Elakkan Bahan Kimia Keras: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the oil-rubbed bronze finish and zinc material.
• Periksa Skru: Periodically check the mounting screws for tightness. If the handle feels loose, gently tighten the screws to ensure secure attachment.

5. Penyelesaian masalah

• Pemegang terasa longgar:

  Penyelesaian: Use a screwdriver to gently tighten the mounting screws from the inside of the cabinet door or drawer. Do not overtighten.

• Handle is difficult to install:

  Penyelesaian: Ensure that the pilot holes are drilled correctly and align with the handle's screw posts. Verify that the drill bit size is appropriate for the screws. If issues persist, consult a professional installer.

6. Spesifikasi

7. Waranti dan Sokongan

Specific warranty information for the Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the retailer where the product was purchased or the manufacturer, Imperial USA, directly.

Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.