Progress Lighting Hide-a-Lite V 9-inch LED Undercabinet Light Instruction Manual

1. Maklumat Keselamatan Penting

PERHATIAN: Read these instructions carefully before installation. Always turn off electricity at the main circuit breaker panel before beginning any installation or servicing of the fixture.

AMARAN: If any special control devices are used with this fixture, ensure that the installation follows all National Electrical Code (N.E.C.) requirements. If you have any questions, consult a qualified Electrical Contractor.

AMARAN: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always wash hands thoroughly after installing, handling, cleaning, or otherwise touching this product.

AMARAN: Disconnect electrical power before installing or servicing any part of the fixture. Ensure that the supply leads are rated for a minimum of 75°C.

2. Produk Lebihview

The Progress Lighting Hide-a-Lite V 9-inch LED Undercabinet fixture is designed for residential and light commercial applications. It features extruded aluminum construction and a lens optimized for light distribution. This fixture offers energy-efficient lighting and can be dimmed with compatible Forward Phase Triac and Electronic Low Voltage (ELV) dimmers.

Image 2.1: A white Progress Lighting Hide-a-Lite V 9-inch LED Undercabinet Light, showing its compact linear design and integrated rocker switch.

3. Pemasangan (Persediaan)

This section outlines the general assembly and wiring steps for the Hide-a-Lite V series (P700000, P700001, P700002, P700003). Refer to the detailed diagram for component identification.

Image 3.1: Detailed diagram showing assembly steps and wiring connections for the Hide-a-Lite V undercabinet light.

3.1 Langkah Perhimpunan

1. Attach components E and G.
2. Connect component D.
3. Secure component F.
4. Assemble components A, B, and C.
5. Fasten components H and F.

3.2 Arahan Pendawaian

• Sambungkan WHITE supply wire kepada WHITE marked fixture wire.
• Sambungkan BLACK supply wire kepada BLACK or SMOOTH fixture wire.
• Sambungkan BARE COPPER or GREEN ground wire from the supply to the BARE COPPER or GREEN ground wire dari perlawanan.

Pastikan semua sambungan elektrik selamat dan mematuhi kod elektrik tempatan.

4. Arahan Operasi

The Hide-a-Lite V undercabinet fixture is designed for straightforward operation.

4.1 Hidupkan/Mati Kuasa

The fixture is equipped with an integrated rocker switch for convenient power control. Simply toggle the switch to turn the light on or off.

4.2 Fungsi Pemalapan

This LED fixture is dimmable down to 10% of its maximum brightness. It is compatible with many Forward Phase Triac and Electronic Low Voltage (ELV) dimmers. For optimal performance, ensure you use a compatible dimmer switch.

5. Penyelenggaraan

To maintain the appearance and performance of your undercabinet light, follow these simple guidelines:

• Pembersihan: Disconnect power before cleaning. Use a soft, dry or slightly damp cloth to wipe the exterior surfaces. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
• Penggantian mentol: This fixture uses integrated LED technology, meaning the LED light source is not user-replaceable. The LEDs are designed for a long operational life.
• Pemeriksaan: Periodically check for any loose connections or signs of wear. If any issues are observed, consult a qualified electrician.

6. Penyelesaian masalah

If you encounter issues with your Hide-a-Lite V fixture, consider the following common troubleshooting steps:

• Lampu tidak menyala:
  • Pastikan pemutus litar utama dihidupkan.
  • Check that the fixture's rocker switch is in the 'ON' position.
  • Verify all wiring connections are secure and correct as per the installation instructions.
• Cahaya berkelip-kelip atau malap dengan tidak betul:
  • Confirm that the dimmer switch used is compatible with LED fixtures and specifically with Forward Phase Triac or ELV dimmers.
  • Pastikan dimmer dipasang dan diwayar dengan betul.
  • Check for loose wiring connections at the fixture or dimmer switch.
• Light output is low:
  • Verify the dimmer setting is at maximum brightness if full output is desired.
  • Ensure the fixture is receiving the correct voltage (120V).

If these steps do not resolve the issue, contact customer service or a qualified electrician.

7. Spesifikasi

Detailed technical specifications for the Progress Lighting Hide-a-Lite V 9-inch LED Undercabinet Light, model P700000-028-30.

Image 7.1: Product specification sheet for the Progress Lighting Hide-a-Lite V, model P700000-028-30.

8. Maklumat Waranti

The Progress Lighting Hide-a-Lite V fixture is backed by a Waranti Terhad 5 tahun. This warranty guarantees your satisfaction with the product and includes professional after-sales customer service support. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact customer service.

9. Sokongan Pelanggan

For any questions, assistance, or technical support regarding your Progress Lighting Hide-a-Lite V undercabinet light, please contact our customer service team:

Telefon Perkhidmatan Pelanggan: 1-800-447-1723

Please have your model number (P700000-028-30) available when contacting support to ensure efficient service.