Manual Pengguna Lampu Pemasangan Siram 11-Inci Project Source

pengenalan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Maklumat Keselamatan

AMARAN: Risiko Kejutan Elektrik. Putuskan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.

• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC).
• Rujuk juruelektrik bertauliah jika anda tidak pasti tentang proses pemasangan.
• Jangan pasang lekapan ini di tempat basah atauamp lokasi.
• Ensure all wires are properly connected and secured to prevent short circuits.
• Jangan melebihi wat maksimumtage specified for this fixture.
• Kendalikan komponen kaca dengan berhati-hati untuk mengelakkan pecah.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Project Source 11-Inch Flush Mount Light Fixture (2 units)
• Mounting Hardware Kit (screws, wire nuts)
• Manual Arahan (dokumen ini)

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Persediaan dan Pemasangan

Alat Diperlukan (Tidak Termasuk):

• Pemutar Skru Kepala Phillips
• Pelucut Kawat
• Pita Elektrik (pilihan)
• Cermin Mata Keselamatan

Langkah Pemasangan:

1. Matikan Kuasa: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding.
2. Keluarkan Lekapan Lama (jika berkenaan): Carefully remove any existing light fixture, noting the wiring connections.
3. Sediakan Pendawaian: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
4. Sambung wayar:
   • Sambungkan hitam wayar dari lekapan ke hitam (hot) wire from the ceiling box using a wire nut.
   • Sambungkan putih wayar dari lekapan ke putih (neutral) wire from the ceiling box using a wire nut.
   • Sambungkan green or bare copper ground wire from the fixture to the green or bare copper ground wire from the ceiling box using a wire nut.

   Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
5. Lekapan Lekapan: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
6. Install Glass Diffuser: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
7. Pulihkan Kuasa: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Arahan Operasi

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

Penyelenggaraan

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

• Pembersihan: Sebelum membersihkan, pastikan kuasa pada lekapan dimatikan pada pemutus litar. Gunakan kain lembut, kering, atau sedikit keringamp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Penjagaan Kaca: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Tiada Penggantian Mentol: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Menyelesaikan masalah

If your light fixture is not functioning as expected, consult the following common issues and solutions:

If the problem persists after trying these solutions, contact a qualified electrician or customer support.

Spesifikasi

Waranti dan Sokongan

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.