Manual Pengguna Stesen Cuaca Digital Alecto WS-1050

1. Pengenalan

Terima kasih kerana membeliasing the Alecto WS-1050 Digital Weather Station. This device provides accurate indoor and outdoor temperature readings, allowing you to monitor environmental conditions with ease. The wireless external probe ensures flexible placement for outdoor temperature measurement.

Ciri-ciri utama termasuk:

• Simultaneous display of indoor and outdoor temperatures.
• Wireless external probe for flexible outdoor placement.
• Indication of temperature trends.
• Temperature display in Celsius (°C) or Fahrenheit (°F).

2. Maklumat Keselamatan

Sila baca dan fahami langkah keselamatan berikut sebelum menggunakan peranti:

• Do not expose the main unit or outdoor sensor to extreme temperatures, direct sunlight, or excessive moisture.
• Gunakan hanya jenis bateri (AAA) yang dinyatakan dan pastikan kekutuban yang betul semasa pemasangan.
• Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
• Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.
• Jauhkan peranti daripada capaian kanak-kanak.
• Jangan cuba membuka atau membaiki peranti sendiri. Hubungi kakitangan perkhidmatan yang berkelayakan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Alecto WS-1050 Main Unit (Indoor Display)
• Sensor Luaran Tanpa Wayar
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

4.1 Main Unit (Indoor Display)

Rajah 1: Depan view of the Alecto WS-1050 main unit, displaying indoor and outdoor temperatures.

The main unit features a clear LCD display showing indoor temperature, outdoor temperature, and temperature trends. It is designed for indoor use.

Rajah 2: Belakang view of the Alecto WS-1050 main unit, highlighting the battery compartment and control buttons.

On the back of the main unit, you will find the battery compartment and control buttons for adjusting settings.

4.2 Penderia Luar Wayarles

Figure 3: The Alecto WS-1050 main unit alongside its wireless outdoor sensor.

The compact outdoor sensor wirelessly transmits temperature data to the main unit. It is designed to be weather-resistant for outdoor placement.

5. Persediaan

5.1 Pemasangan Bateri

1. Untuk Sensor Luar Tanpa Wayar: Open the battery compartment on the back of the outdoor sensor. Insert the required AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Untuk Unit Utama: Open the battery compartment on the back of the main unit (refer to Figure 2). Insert the required AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.

Penting: For optimal performance and to ensure proper synchronization, it is recommended to install batteries in the outdoor sensor first, then in the main unit.

5.2 Penyegerakan Sensor

After installing batteries in both units, the main unit will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature will appear on the main unit's display.

5.3 Cadangan Penempatan

• Unit Utama: Place the main unit indoors, away from direct sunlight, heat sources, or drafts that could affect its indoor temperature readings.
• Penderia Luaran: For accurate outdoor readings, place the sensor in a shaded area, protected from direct rain and sunlight. Ensure it is within the wireless range of the main unit (typically up to 30 meters in open air, less with obstructions). Avoid placing it near large metal objects or electrical appliances that could interfere with the wireless signal.

Gambar 4: Cthample placement of the main unit indoors and the outdoor sensor mounted on an exterior wall.

6. Arahan Operasi

6.1 Paparan Maklumat

The main unit's LCD display shows the following information:

• Suhu Dalaman: Current temperature measured by the main unit.
• Suhu Luaran: Current temperature transmitted by the wireless outdoor sensor.
• Temperature Trend Indicators: Arrows next to the temperature readings indicate if the temperature is rising, falling, or stable.

Figure 5: The Alecto WS-1050 main unit in operation, showing temperature readings.

6.2 Menukar Unit Suhu (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), press the '°C/°F' button located on the back of the main unit (refer to Figure 2).

6.3 MAX/MIN Temperature Records

The device records the maximum and minimum temperatures measured since the last reset. To view these records, press the 'MAX/MIN' button on the back of the main unit. Pressing it repeatedly will cycle through maximum indoor, minimum indoor, maximum outdoor, and minimum outdoor temperatures. To clear the records, press and hold the 'MAX/MIN' button while viewmengambil rekod.

6.4 Channel Selection (if applicable)

If you are using multiple outdoor sensors (sold separately), you can switch between channels (CH1, CH2, CH3) by pressing the 'CH' button on the back of the main unit. The display will indicate which channel's outdoor temperature is currently shown.

7. Penyelenggaraan

• Pembersihan: Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Penggantian Bateri: When the battery indicator appears on the display, replace the batteries in the respective unit (main unit or outdoor sensor). Follow the battery installation steps in Section 5.1.
• Storan: Jika menyimpan peranti untuk tempoh yang lama, tanggalkan bateri untuk mengelakkan kebocoran.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

Alecto products are designed and manufactured to the highest standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Alecto webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.