1. Pengenalan
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Arahan Keselamatan
- Keselamatan Elektrik: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Penggunaan Luaran: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Jenis Mentol: Use only R7s halogen bulbs with a maximum wattage of 150W. Exceeding the maximum wattage can cause overheating and damage to the fixture or create a fire hazard.
- Pengendalian: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Pemasangan: Pastikan permukaan pemasangan kukuh dari segi struktur dan dapat menampung berat lekapan.
3. Kandungan Pakej
Sila pastikan semua komponen ada dan tidak rosak:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Perkakasan Pemasangan (skru, palam dinding)
- Manual Arahan (dokumen ini)
Note: R7s bulb is typically not included and must be purchased separately.
4. Persediaan dan Pemasangan
Sebelum anda memulakan: Pastikan bekalan kuasa ke kawasan pemasangan dimatikan pada pemutus litar utama.
- Sediakan Permukaan Pemasangan: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Lekapkan Pendakap: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Pendawaian: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Pasang Mentol: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Lampirkan Lekapan: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Rajah 4.2: Jarak dekat view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Arahan Operasi
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Pengesanan Pergerakan: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Tempoh Cahaya: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Penyelenggaraan
- Pembersihan: Untuk membersihkan lekapan, pastikan kuasa dimatikan. Lap dengan kain lembutamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Penggantian mentol: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Pemeriksaan: Periksa lekapan secara berkala untuk sebarang tanda kerosakan, sambungan longgar atau haus. Jika terdapat sebarang masalah, putuskan bekalan elektrik dan rujuk juruelektrik yang berkelayakan.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Lampu kekal menyala secara berterusan. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Lampu menyala secara rawak. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Cahaya berkelip-kelip. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Cemerlang |
| Nombor Model | 96162/06 |
| Dimensi Produk (L x W x H) | 14 x 21 x 22 cm |
| Berat Barang | 521 gram |
| Penarafan IP | IP44 |
| Gaya | moden |
| warna | Hitam |
| bahan | Logam, Kaca |
| Bilangan Mentol | 1 |
| Voltage | 230 Volt |
| Kegunaan Khusus | Penggunaan luar sahaja |
| Ciri Khas | Adjustable (sensor/light head) |
| Jenis Cap | R7s |
| Max Wattage | 150W |
| Sumber Kuasa | Electrical Cable (Wired) |
| Jenis Pemasangan | Pemasangan Dinding |
| Label Tenaga | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Waranti dan Sokongan
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
