Monoprice Monolith 4-Tier Audio Stand Instruction Manual

1. Pengenalan

The Monoprice Monolith 4-Tier Audio Stand is designed to organize and display your home theater or entertainment system components. It features a sturdy, modular design with open-air shelving to ensure proper ventilation for your equipment.

This manual provides detailed instructions for the assembly, safe operation, and maintenance of your audio stand.

2. Maklumat Keselamatan

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in property damage or personal injury.

• Had Berat: Each shelf can support up to 75 lbs (34 kg). The total weight capacity for the entire stand is 300 lbs (136 kg). Do not exceed these limits.
• Komponen Selamat: Always ensure all audio/video components are securely placed on the shelves to prevent them from falling.
• Permukaan Aras: Assemble and place the stand on a stable, level surface to prevent tipping.
• Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan daripada penyangga semasa pemasangan. Jangan biarkan mereka memanjat atau bermain dengan penyangga.
• Pengudaraan: The open-air design promotes airflow. Do not block ventilation openings of your electronic components.

3. Kandungan Pakej

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Monoprice customer support.

• MDF Shelves (4x)
• Steel Support Tubes (various lengths for modular assembly)
• Feet/Spikes (4x)
• Perkakasan Pemasangan (skru, pencuci, dsb.)

Figure 1: Fully assembled Monoprice Monolith 4-Tier Audio Stand.

4. Arahan Perhimpunan

Assembly is straightforward and typically requires no special tools. A rubber mallet may be helpful for seating the threaded caps for the feet.

1. Sediakan Pangkalan:
   • Place one MDF shelf (this will be the bottom shelf) upside down on a soft, clean surface to prevent scratches.
   • Attach the four feet/spikes to the designated holes on the bottom shelf. Ensure they are securely tightened. If using carpet spikes, insert the threaded caps into the bottom of each foot first. A rubber mallet can assist in seating these caps.
2. Attach Support Tubes:
   • Screw the first set of steel support tubes into the top side of the bottom shelf. Ensure they are hand-tightened securely. Note that one set of tubes may be longer to accommodate taller components on a specific tier. Plan your desired configuration.
3. Tambah Rak Berikutnya:
   • Carefully place the next MDF shelf onto the top of the attached support tubes, aligning the holes.
   • Screw the next set of support tubes into the top of this shelf.
   • Repeat this process for the remaining shelves and support tubes until all four tiers are assembled.
4. Pengetatan dan Penataan Akhir:
   • Once all shelves and tubes are in place, gently tighten all connections to ensure stability. Do not overtighten.
   • Place the assembled stand in its desired location. Use the adjustable feet/spikes to level the stand. It is recommended to level the front two legs first, then a third leg, and finally the fourth for optimal balance.

Rajah 2: Depan view of the assembled stand, showing shelf and tube arrangement.

5. Arahan Operasi

The Monolith Audio Stand is designed for straightforward use with your audio and video components.

• Peletakan Komponen: Carefully place your audio/video components onto the shelves. Distribute weight evenly across each shelf.
• Pengurusan Kabel: The open-air design and curved rear edges of the shelves facilitate cable routing. Organize cables neatly to prevent tangles and ensure proper airflow.
• Pengudaraan: Ensure that the ventilation openings of your electronic devices are not obstructed by other components or cables. The stand's design promotes natural convection cooling.

Rajah 3: Atas-bawah view of a shelf, highlighting the curved design for cable access.

6. Penyelenggaraan

To maintain the appearance and longevity of your audio stand, follow these simple care instructions:

• Pembersihan: Wipe the shelves and steel tubes with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Pemeriksaan: Periksa semua sambungan secara berkala untuk memastikan ia kekal ketat dan selamat.
• Elakkan Kelembapan: Do not expose the stand to excessive moisture or direct sunlight for prolonged periods.

7. Penyelesaian masalah

If you encounter issues with your Monolith Audio Stand, consider the following:

• Berdiri Goyang:
  • Ensure the stand is placed on a completely level surface.
  • Adjust the individual feet/spikes to achieve perfect balance.
  • Verify that all support tubes are securely tightened to the shelves.
• Scratches on Shelves:
  • The shelves are designed to be scratch-resistant, but not scratch-proof. Avoid dragging heavy or sharp objects across the surface.
  • Use felt pads under components if concerned about potential scratching.
• Komponen Terlalu Panas:
  • Ensure adequate space around components for airflow.
  • Verify that no cables are blocking the ventilation grilles of your devices.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, technical support, or to inquire about replacement parts, please contact Monoprice customer service directly. Refer to your purchase documentation or the official Monoprice weblaman web untuk maklumat hubungan.

Monoprice Webtapak: www.monoprice.com