DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Pengenalan

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Maklumat Keselamatan

Always observe the following safety precautions when installing and operating your loudspeaker:

• Putuskan terminal negatif bateri kenderaan sebelum memulakan sebarang kerja elektrik untuk mengelakkan litar pintas.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amppenyangga, atau sistem elektrik kenderaan.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• Do not operate the audio system at excessively high volumes for prolonged periods, as this can cause hearing damage.
• Rujuk pemasang profesional jika anda tidak pasti tentang mana-mana bahagian proses pemasangan.

3. Apa yang ada di dalam Kotak

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Manual Arahan

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Spesifikasi

Imej: Depan view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Persediaan dan Pemasangan

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Merancang Pemasangan

• lokasi: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Pendawaian: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpPemadanan liifier: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Memasang Pembesar Suara

Imej: Side profile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Sediakan Permukaan Pemasangan: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Position Speaker: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Penceramah selamat: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Sambungan Pendawaian

Imej: Belakang view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Kenal pasti Terminal: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Sambung wayar: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Sambungan Selamat: Pastikan semua sambungan ketat dan bebas daripada litar pintas.

6. Arahan Operasi

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Integrasi Sistem: Connect the PRO-GM6 to an appropriate ampsaluran penguat.
• Tetapan Crossover: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Pelarasan Keuntungan: Tetapkan ampkeuntungan liifier dengan betul untuk memadankan vol keluarantage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Tempoh Pecah Masuk: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Penyelenggaraan

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Pembersihan: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Pemeriksaan: Periksa sambungan pembesar suara secara berkala untuk memastikan ia ketat dan pastikan tiada wayar yang terurai atau terdedah.
• Perlindungan Alam Sekitar: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Penyelesaian masalah

9. Waranti dan Sokongan

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Anda boleh mendapatkan maklumat lanjut dan butiran hubungan di DS18 Official Store on Amazon.