pengenalan
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Banda Viking 5001 Car Amplifier. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
Maklumat Keselamatan
Sentiasa patuhi langkah keselamatan berikut:
- Use 1/0AWG power cables for both GND and +12Vdc connections.
- Do not use an impedance load lower than the amplifier specification (1 Ohm). This can damage the equipment.
- Use wire solder for tinning cable ends for better electrical contact. Loose electrical connections can cause malfunction, heating, and even fire.
- The GND connection must be as short as possible, using an adequate wire terminal firmly connected to a clean, paint-free spot at the car chassis.
- Jika lebih daripada satu amplifier is used, provide adequate individual wiring for each one.
- If using a power supply, it must be capable of supplying between 12.6 – 14.4Vdc with at least the amplifier's maximum current value and a maximum output variation (Vripple) of 10%.
- Pastikan pengudaraan yang betul di sekeliling amppelapis untuk mengelakkan terlalu panas.
- Disconnect the vehicle's battery before performing any wiring or installation.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Kereta Banda Viking 5001 Amplebih hidup
- Panduan Mula Pantas
Produk Selesaiview
The Banda Viking 5001 is a powerful 1-channel car audio amplifier designed to deliver up to 5000 Watts maximum power at 1 Ohm. It features a bass boost, high pass filter, and low pass filter for precise audio control.
Rajah 1: Atas view of the Banda Viking 5001 Car Amppenguat, pertunjukancasing the branding and indicator lights.
Rajah 2: Dimensions of the Banda Viking 5001 Car Amplebih hidup. The amplifier measures approximately 12.3 inches in width and 10.6 inches in length, with a height of 2.4 inches.
Rajah 3: The Banda Viking 5001 is a 1-channel vehicle audio bass amplifier, capable of delivering 1500 WRMS at 1 Ohm, designed for powerful bass reproduction.
Persediaan dan Pemasangan
Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat peranti anda amplifier. Follow these steps carefully:
- Pendawaian Kuasa: Use 1/0AWG power cables for both the ground (GND) and positive (+12Vdc) connections. Ensure the GND connection is as short as possible and firmly connected to a clean, paint-free spot on the car chassis.
- Hidupkan Jauh: Sambungkan wayar hidup jauh dari unit kepala anda ke ampinput jauh liifier.
- Input Audio: Connect your audio source (e.g., head unit) to the amplifier's RCA input connectors.
- Pendawaian Pembesar Suara: Sambungkan pembesar suara anda ke amplifier's speaker output terminals. Ensure the impedance load is not lower than 1 Ohm.
- Pemasangan fius: The recommended fuse for this amplifier is 100A. Ensure the fuse is properly installed in the power line close to the battery.
- Pemasangan: Lekapkan amplifier securely in a location that allows for adequate ventilation. The amplifier is designed for floor standing mounting.
Rajah 4: RCA connectors on the Banda Viking 5001 amplifier. These connectors ensure a secure and distortion-free sound connection between the amppembesar dan pembesar suara.
Rajah 5: Dalaman view of the Banda Viking 5001 amplifier, showing recommended wiring specifications. Recommended Fuse: 100A, Average Current Draw (Music): 100A, Current at Rest: 1A, Power Wire Gauge: 21mm²/4 AWG.
Arahan Operasi
Setelah dipasang, amplifier will power on with your head unit. Adjust the settings for optimal sound performance.
- Kawalan Keuntungan: Adjust the gain control to match the output voltage of your head unit. Start low and gradually increase until desired volume is achieved without distortion.
- Penapis: Utilize the built-in high pass filter (HPF) and low pass filter (LPF) to tailor the frequency response to your speakers and subwoofers.
- Peningkatan Bass: Use the bass boost feature to enhance low-frequency output as desired.
Rajah 6: Amplifier indicator lights. The blue light indicates the amplifier is powered on and receiving a source signal. The red light indicates output distortion. The yellow light, when flashing, indicates below specified voltage.
Penyelenggaraan
To ensure the longevity and optimal performance of your Banda Viking 5001 amplifier, ikut garis panduan penyelenggaraan ini:
- Pembersihan: Bersihkan secara berkala ampLap bahagian luar penapis dengan kain yang lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Pengudaraan: Memastikan bahawa amplifier's cooling fins are free from dust and debris to maintain proper airflow and prevent overheating.
- Sambungan: Regularly check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to performance issues or damage.
- Persekitaran: Elakkan daripada mendedahkan amppemampat kepada suhu yang melampau, lembapan atau cahaya matahari langsung.
Menyelesaikan masalah
Jika anda menghadapi masalah dengan anda amplifier, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Amppenyangga tidak dihidupkan. | No power, blown fuse, loose ground, remote wire issue. | Check power and ground connections. Verify fuse. Ensure remote wire is connected and receiving signal from head unit. |
| Tiada keluaran bunyi. | RCA cables disconnected, speaker wires loose, amppenguat dalam mod perlindungan. | Check RCA and speaker connections. Verify amplifier indicators (e.g., distortion or low voltagdan). |
| Bunyi herot. | Gain set too high, improper filter settings, speaker impedance too low. | Reduce gain. Adjust HPF/LPF settings. Ensure speaker impedance meets specifications (1 Ohm minimum). Check for red distortion indicator light. |
| Amplifier overheats. | Pengudaraan tidak mencukupi, impedans terlalu rendah, penggunaan isipadu tinggi yang berpanjangan. | Pastikan aliran udara yang mencukupi di sekeliling amplifier. Verify speaker impedance. Reduce volume or allow ampliifier untuk menyejukkan badan. |
| Yellow flashing light (Low Batt). | Masukan voltage is below the specified minimum (9Vdc). | Check vehicle's battery and charging system. Ensure power supply is providing adequate voltage (12.6-14.4Vdc). |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Bahagian Audio Banda |
| Nombor Model | VIKING5001 |
| Jenis Produk | Audio Kereta Amplebih hidup |
| Bilangan Saluran | 1 |
| Kuasa Keluaran (Maks) | 5000 Watts @ 1 Ohm |
| Kuasa Output (RMS) | 1500 WRMS @ 1 Ohm |
| Minimum Impedance Load | 1 Ohm |
| Voltage | 12 Volt (DC) |
| Bekalan Minimum Voltage | 9 Volt (DC) |
| Bekalan Maksimum Voltage | 15 Volt (DC) |
| Fius yang disyorkan | 100A |
| Purata Undian Semasa (Muzik) | 100A |
| Arus Rehat | 1A |
| Tolok Wayar Kuasa | 21mm²/4 AWG |
| Dimensi (L x W x H) | Anggaran. 12.3 x 10.6 x 2.4 inci |
| Berat Barang | 5 paun |
| Jenis Pemasangan | Lantai Berdiri |
| Negara Asal | Brazil |
Waranti dan Sokongan
For warranty information and technical support, please refer to the Quick Start Guide included with your product or visit the official Banda Audioparts webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.
For further assistance, you may contact the manufacturer, Deejayled, or the seller, LM_CORPORATION, through their respective support channels.
