1. Pengenalan
This manual provides detailed instructions for the installation and maintenance of the Eheim Holders, model 7248648. These holders are specifically designed for use with the Eheim Compact ON Pump 1000 (model 1022) to ensure stable and secure placement within your aquarium system. Proper installation of these holders contributes to optimal pump operation and longevity.
2. Produk Lebihview
The Eheim Holders (model 7248648) are supplied as a set of two durable rubber components. They are essential for mounting the Eheim Compact ON Pump 1000 (1022) securely, preventing movement and reducing vibration during operation.
Rajah 1: Packaging of the Eheim 7248648 Holders. The package displays the Eheim brand, model number 7248648, and barcodes.
Rajah 2: Satu jarak dekat view of the two individual Eheim 7248648 rubber holders. These small, black, cylindrical components are designed to fit onto the pump shaft.
3. Persediaan dan Pemasangan
Follow these steps to correctly install the Eheim Holders (7248648) onto your Eheim Compact ON Pump 1000 (1022).
- Sediakan Pam: Ensure your Eheim Compact ON Pump 1000 (1022) is clean and disconnected from any power source.
- Cari Titik Pemasangan: Identify the two ends of the pump's impeller shaft where the holders are to be placed. Refer to Figure 3 for visual guidance.
- Install Holders: Gently slide one Eheim holder onto each end of the impeller shaft. The holders should fit snugly, providing cushioning and stability. Do not force them, as this may damage the pump or the holders.
- Sahkan Peletakan: Once installed, ensure both holders are securely seated and provide a stable base for the pump.
Rajah 3: A close-up image showing one Eheim 7248648 holder correctly installed on the end of a pump's impeller shaft, indicated by a white dot.
Rajah 4: An exploded diagram illustrating the assembly of an Eheim pump, highlighting the placement of the 7248648 holders (labeled 'ラバー' and '7248648') at both ends of the impeller assembly. This diagram shows how the holders integrate into the pump's structure for stability.
4. Arahan Operasi
The Eheim Holders (7248648) are passive components designed to provide stability for your Eheim Compact ON Pump 1000 (1022). Once installed, they require no further operational input. Their function is to absorb vibrations and maintain the pump's position, ensuring quiet and efficient operation within the aquarium.
5. Penyelenggaraan
To ensure continued optimal performance and longevity of your Eheim Holders:
- Pemeriksaan Berkala: Periodically inspect the holders for signs of wear, cracking, or degradation, especially during routine pump cleaning.
- Pembersihan: If necessary, gently clean the holders with a soft brush and aquarium-safe water to remove any algae or debris buildup.
- Penggantian: If the holders show significant signs of wear or no longer provide a snug fit, replace them with new Eheim 7248648 holders to maintain pump stability and prevent potential damage.
6. Penyelesaian masalah
As passive components, the Eheim Holders typically do not require extensive troubleshooting. However, if you experience issues related to pump stability or excessive vibration, consider the following:
- Pump Instability: If the pump is wobbling or moving excessively, check that both holders are correctly seated on the impeller shaft and are not worn out.
- Peningkatan Bunyi/Getaran: Worn or improperly installed holders can contribute to increased noise or vibration from the pump. Inspect and replace if necessary.
- Missing Holder: Ensure both holders are present. The pump requires two holders for proper balance and stability.
If issues persist after checking the holders, consult the instruction manual for your Eheim Compact ON Pump 1000 (1022) or contact Eheim customer support.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Eheim |
| Model Number (Item) | 7248648 |
| Compatible Pump Model | Eheim Compact ON Pump 1000 (1022) |
| Product Dimensions (per holder) | 0.7 x 0.8 x 0.8 cm |
| Item Weight (per holder) | 1 g |
| Negara Asal | Belanda |
8. Waranti dan Sokongan
For specific warranty information regarding the Eheim Holders (7248648), please refer to the documentation provided with your original Eheim Compact ON Pump 1000 (1022) or contact Eheim customer service directly. Eheim products are known for their quality and durability. For technical support or inquiries, please visit the official Eheim webtapak atau hubungi pusat perkhidmatan mereka yang dibenarkan.
