pengenalan
This manual provides detailed instructions for the proper installation, usage, and maintenance of your Solus SB-2403-BK Die Cast Aluminum Stand. Please read these instructions carefully before beginning installation to ensure safe and correct assembly.
The Solus SB-2403-BK is a durable die-cast aluminum flange base designed to securely anchor standard 3-inch light posts into the ground. It features a powder-coated finish for enhanced durability and rust resistance.
Kandungan Pakej
Pastikan semua komponen tersedia sebelum meneruskan pemasangan.
- 1 x Solus SB-2403-BK Die Cast Aluminum Stand
- 4 x Anchor Bolts (3/8" x 12") with washers and hexagonal nuts
- 1 x Anchor Bolt Template
- 1 x sepana Allen

Rajah 1: Included hardware components for the Solus SB-2403-BK stand. This includes four anchor bolts, the round flange base, and an Allen wrench for assembly.
Persediaan & Pemasangan
This stand is designed for outdoor use only and is suitable for surface mounting light posts up to 8 feet in height with a 3-inch diameter.
1. Penyediaan Tapak
- Choose a suitable outdoor location for your light post.
- Pastikan tanah adalah rata dan stabil.
- Before digging, contact local utility services (e.g., "Call Before You Dig" services) to identify and avoid underground utilities.
2. Anchor Bolt Template Usage
Use the provided anchor bolt template to mark the precise locations for drilling holes for the anchor bolts. It is crucial to verify measurements on the template against the actual base before use, as printing processes may cause slight variations.

Rajah 2: Anchor Bolt Template. This diagram illustrates the bolt pattern, recommended concrete foundation dimensions, and electrical conduit placement. Note that the drawing is not to scale.

Rajah 3: Anchor Bolt Instructions. This provides a visual guide for the components and the recommended concrete foundation structure for secure installation.
- The template indicates a 7-inch bolt circle diameter and 7/16 inch diameter holes for the anchor bolts.
- The concrete foundation should extend above grade line to any convenient height, with a minimum depth of 30 inches or more.
- Ensure any electrical conduits or UF cables lie within a 2-inch circle centered between anchor bolts.
- Consult local wiring codes and an electrical contractor before installing the post if electrical connections are involved.
3. Securing the Base
- Once the anchor bolts are set in concrete according to the template, position the Solus SB-2403-BK base over the bolts.
- Secure the base using the provided washers and hexagonal nuts on the anchor bolts. Tighten firmly to ensure stability.

Rajah 4: Cth pemasanganample. A light post is being inserted into the securely mounted Solus SB-2403-BK flange base.
The base is designed to accommodate a 3-inch diameter post. Use the included Allen wrench to tighten any set screws on the base that secure the post.
Garis Panduan Penggunaan
- Produk ini bertujuan untuk kegunaan luaran sahaja.
- Ensure the light post is properly seated and secured within the base to prevent wobbling or accidental dislodgement.
- Regularly inspect the base and anchor bolts for any signs of loosening or damage, especially after severe weather conditions.
Penyelenggaraan
The Solus SB-2403-BK stand is constructed from durable powder-coated aluminum, which is designed to resist rust and corrosion, minimizing maintenance requirements.
- Pembersihan: Periodically clean the stand with a soft cloth and mild soap and water solution to remove dirt and debris. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish.
- Pemeriksaan: Annually inspect the anchor bolts and the base for any signs of wear, corrosion, or loosening. Tighten any loose fasteners as needed.
Menyelesaikan masalah
As a static mounting component, the Solus SB-2403-BK stand has limited troubleshooting scenarios. Most issues relate to initial installation.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Post is wobbly or unstable. | Anchor bolts not sufficiently tightened, or concrete foundation is compromised. | Ensure anchor bolts are securely tightened. If the foundation is compromised, professional repair or re-installation may be required. |
| Base does not fit the post. | Incorrect post diameter. | Verify that the post diameter is 3 inches. This base is designed specifically for 3-inch posts. |
| Rust or corrosion on the base. | Damage to the powder-coated finish, or exposure to unusually harsh corrosive agents. | Clean the affected area and apply a suitable outdoor-grade protective coating if the finish is compromised. The powder-coated aluminum is designed to be rust-resistant under normal conditions. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | SB-2403-BK |
| bahan | Aluminium Die Cast |
| Jenis Selesai | Bersalut Serbuk |
| warna | Hitam |
| bentuk | Round Flange Base |
| Jenis Pemasangan | Lekapan Permukaan |
| Compatible Post Diameter | 3 inci |
| Maximum Post Height | Sehingga 8 kaki |
| Diameter asas | 8 inci |
| Ketinggian | 5 inci |
| Bolt Mounting Pattern | 7-inch bolt circle diameter |
| Komponen yang Disertakan | Anchor Bolts, Template, Allen Wrench |
| Penggunaan Khusus | Penggunaan luar sahaja |

Rajah 5: Product Dimensions. This diagram shows the overall height of 5 inches and a base diameter of 8 inches.

Rajah 6: Bolt Mounting Pattern. This view highlights the 8-inch overall diameter and the 7-inch bolt mounting pattern for anchor bolts.
Waranti & Sokongan
Maklumat Waranti
The Solus SB-2403-BK Die Cast Aluminum Stand comes with a Waranti 1 Tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.

Rajah 7: Solus 1-Year Guarantee. This emblem signifies the product's warranty period.
Sokongan Pelanggan
For technical assistance, warranty claims, or any questions regarding your Solus product, please contact Solus customer support through their official webtapak atau peruncit tempat produk itu dibeli.
Always refer to the model number (SB-2403-BK) when contacting support.





