EXTEL 081735

EXTEL diBi Flash Wireless Doorbell User Manual

Model: 081735

1. Pengenalan

Thank you for choosing the EXTEL diBi Flash Wireless Doorbell. This manual provides essential information for the proper installation, operation, and maintenance of your new doorbell system. Please read these instructions carefully before use and retain them for future reference.

The EXTEL diBi Flash Wireless Doorbell offers a reliable solution for visitor alerts, featuring a wireless range of up to 200 meters, a distinctive flash function, and customizable ringtones. Its low power alert system ensures you are always informed when batteries require attention.

EXTEL diBi Flash Wireless Doorbell receiver and call button

Imej 1.1: The EXTEL diBi Flash Wireless Doorbell system, showing both the receiver unit and the external call button.

2. Kandungan Pakej

Sila sahkan bahawa semua komponen terdapat dalam pakej anda:

  • 1 x Flash Bell (Receiver Unit) - Bateri tidak disertakan
  • 1 x Call Button (Transmitter Unit) - Bateri disertakan
  • 1 x Rain Cover for Call Button

3. Maklumat Keselamatan

Untuk memastikan operasi yang selamat dan mengelakkan kerosakan, sila patuhi langkah berjaga-jaga keselamatan berikut:

  • Jangan dedahkan unit kepada suhu yang melampau, cahaya matahari langsung atau kelembapan berlebihan.
  • Jauhkan peranti daripada air dan cecair lain.
  • Do not attempt to open or repair the units yourself. Refer all servicing to qualified personnel.
  • Dispose of batteries according to local regulations. Do not mix old and new batteries, or different types of batteries.
  • Jauhkan bateri daripada kanak-kanak.

4. Persediaan dan Pemasangan

4.1. Call Button (Transmitter) Installation

  1. Prepare the Call Button: The call button comes with a battery pre-installed. Ensure any protective tabs are removed to activate the battery.
  2. Mount the Rain Cover: Position the rain cover in your desired location near your entrance. Mark the screw holes.
  3. Selamatkan Penutup Hujan: Drill pilot holes if necessary and secure the rain cover to the wall using appropriate screws (not included).
  4. Insert Call Button: Place the call button inside the mounted rain cover, ensuring it is securely fitted and protected from the elements.
Close-up of EXTEL diBi Flash Wireless Doorbell call button

Imej 4.1: The external call button, designed for outdoor installation with its protective rain cover.

4.2. Flash Bell (Receiver) Installation

  1. Masukkan Bateri: Open the battery compartment on the back of the flash bell receiver. Insert the required batteries (not included) according to the polarity markings. Close the compartment securely.
  2. Letakkan Penerima: Place the receiver unit in a central location within your home, ensuring it is within the 200-meter wireless range of the call button. Avoid placing it near large metal objects or other electronic devices that may interfere with the signal.
  3. Uji Sambungan: Press the call button outside. The flash bell should ring and flash. If it does not, refer to the Troubleshooting section.
Close-up of EXTEL diBi Flash Wireless Doorbell receiver unit

Imej 4.2: The internal flash bell receiver unit, showing its speaker grille and control buttons.

5. Arahan Operasi

The EXTEL diBi Flash Wireless Doorbell is designed for simple operation.

5.1. Pemilihan Nada Dering

The receiver unit offers 6 distinct ringtones. To change the ringtone:

  • Locate the music note button () on the top of the receiver unit.
  • Press this button repeatedly to cycle through the available ringtones. Stop when you hear your preferred melody.

If you have multiple transmitters, you can customize a unique ringtone for each to easily distinguish which entrance a visitor is at.

5.2. Pelarasan Kelantangan

To adjust the volume of the doorbell chime:

  • Locate the volume button (speaker icon with sound waves) on the top of the receiver unit.
  • Press this button to cycle through the available volume levels (e.g., high, medium, low, mute).

5.3. Flash Function

In addition to the audible chime, the flash bell receiver is equipped with a visual alert. When the call button is pressed, the receiver will emit a white flash light, providing an additional notification, especially useful in noisy environments or for individuals with hearing impairments.

5.4. Low Power Alert

The system includes a low power alert feature. When the batteries in either the call button or the flash bell receiver are running low, the unit will provide an indication (e.g., a specific light pattern or sound) to inform you that battery replacement is needed. This ensures continuous operation and prevents missed visitors.

Close-up of control buttons on EXTEL diBi Flash Wireless Doorbell receiver

Imej 5.1: Detail of the control buttons on the receiver unit for adjusting ringtone and volume.

6. Penyelenggaraan

6.1. Penggantian Bateri

When the low power alert is activated, replace the batteries promptly.

  • Butang panggilan: Open the call button casing (refer to installation steps in Section 4.1). Replace the existing battery with a new, equivalent lithium battery. Ensure correct polarity.
  • Flash Bell Receiver: Open the battery compartment on the back of the receiver. Replace the existing batteries with new, equivalent batteries. Ensure correct polarity.

Always use the recommended battery type and dispose of old batteries responsibly.

6.2. Pembersihan

To clean the doorbell units, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. The call button's rain cover should be periodically checked for debris and cleaned to ensure proper button function.

7. Penyelesaian masalah

If you encounter issues with your EXTEL diBi Flash Wireless Doorbell, please consult the following table:

MasalahKemungkinan PuncaPenyelesaian
Doorbell does not ring or flash.
  • Low or dead batteries in receiver or call button.
  • Unit-unit berada di luar julat.
  • Gangguan daripada peranti lain.
  • Gantikan bateri di kedua-dua unit.
  • Move receiver closer to the call button.
  • Relocate receiver away from potential interference sources.
Julat operasi pendek.
  • Obstructions (thick walls, metal structures).
  • Gangguan.
  • Relocate receiver or call button to minimize obstructions.
  • Ensure no large metal objects are between the units.
Doorbell rings intermittently.
  • Bateri lemah.
  • Gangguan isyarat.
  • Gantikan bateri.
  • Check for and eliminate sources of interference.

8. Spesifikasi

  • Nombor Model: 081735
  • Jenama: EXTEL
  • Julat Tanpa Wayar: Sehingga 200 meter (padang terbuka)
  • Power Source (Receiver): Dikuasakan oleh Bateri (Bateri tidak termasuk)
  • Power Source (Call Button): Battery Powered (Battery included)
  • Jenis Sel Bateri: Lithium (for call button)
  • Bilangan Nada Dering: 6
  • Dimensi (Produk): 4 x 9 x 9 cm
  • Berat (Produk): 180 g
  • Komponen yang Disertakan: 1 Flash Bell, 1 Call Button, 1 Rain Cover

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the warranty card included with your product or contact your retailer. You may also visit the official EXTEL weblaman web untuk bantuan lanjut dan butiran perhubungan.

Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Dokumen Berkaitan - 081735

Praview Extel Mood 083701 Smart Access: Panduan Pemasangan & Manual Pengguna
Pemasangan dan panduan pengguna yang komprehensif untuk Extel Mood 083701 Smart Access loceng pintu wayarles dan peranti rumah pintar. Ketahui tentang persediaan, ciri, penyelenggaraan dan spesifikasi.
Praview EXTEL WAVE Connected Videophone and Intercom Panel Installation and User Manual
Comprehensive guide for installing and using the EXTEL WAVE connected videophone and intercom panel, including setup, features, technical specifications, and safety instructions.
Praview Extel WAVE 3: Videocitofono senza fili connesso con lettore di impronte digitali - Guida all'installazione e all'uso
Scopri il videocitofono senza fili Extel WAVE 3 con lettore di impronte digitali. Questa guida completa fornisce istruzioni dettagliate per l'installazione, l'utilizzo e la connessione allo smartphone, ottimizzando la sicurezza e la comodità della tua casa.
Praview Extel Wave 3 : Guide d'installation et d'utilisation du visiophone connecté avec lecteur d'empreintes digitales
Découvrez le guide complet d'installation et d'utilisation du visiophone connecté sans fil Extel Wave 3 avec lecteur d'empreintes digitales (Réf. 720337). Apprenez à installer, configurer et utiliser toutes les fonctionnalités de votre interphone vidéo.
Praview Garantie Appareil Avidsen : Conditions et Informations
Détails des termes et conditions de garantie pour les appareils Avidsen, incluant couverture, exclusions, directives d'entretien et informations de contact.
Praview Telefon Pintu Wayarles EXTEL AUDIOGLASS 651 & 652: Pemasangan dan Panduan Pengguna
Pemasangan dan panduan pengguna yang komprehensif untuk sistem telefon pintu wayarles EXTEL AUDIOGLASS 651 dan 652. Merangkumi penerangan komponen, langkah pemasangan, spesifikasi, penyelesaian masalah dan pengaturcaraan.