Meliconi AT55

Meliconi AT55 AmpManual Pengguna Antena TV Dalaman yang Dikuasakan

Model: AT55 (881016)

1. Pengenalan

The Meliconi AT55 is an amplified indoor TV antenna designed for optimal reception of digital terrestrial television (DVB-T), high-definition DVB-T (DVB-T HD), and digital radio (DAB+) signals. This antenna is equipped with special filters to minimize interference from 4G and 5G signals and is prepared for DVB-T2 HEVC reception. Its advanced internal amplification circuit ensures a low noise figure of less than 1 dB, contributing to clear signal quality.

This manual provides essential information for the correct installation, operation, and maintenance of your Meliconi AT55 antenna.

2. Maklumat Keselamatan

  • Baca semua arahan sebelum digunakan dan simpan untuk rujukan masa hadapan.
  • Do not expose the antenna to rain or moisture.
  • Pastikan bekalan kuasa voltage sepadan dengan keperluan yang dinyatakan pada penyesuai.
  • Disconnect the power adapter during lightning storms or when unused for extended periods.
  • Do not attempt to open or modify the antenna. Refer all servicing to qualified personnel.
  • Keep the antenna away from heat sources and direct sunlight.
  • Place the antenna on a stable, flat surface to prevent it from falling.

3. Kandungan Pakej

Sahkan bahawa semua item berikut disertakan dalam pakej anda:

  • Meliconi AT55 AmpAntena TV Dalaman dipasang
  • AC/DC Power Adapter (230V)
  • USB Power Cable (5V)
  • Manual Arahan

4. Persediaan

Follow these steps to set up your Meliconi AT55 antenna:

  1. Peletakan Antena: Position the antenna in an optimal location, ideally near a window and away from large metal objects or other electronic devices that could cause interference. Experiment with different positions to find the best signal reception.
  2. Connect to TV/Decoder: Connect the antenna's coaxial cable to the 'Antenna In' or 'RF In' port on your television or digital terrestrial decoder.
  3. Sambungan Kuasa: The antenna can be powered in two ways:
    • Via AC Adapter: Connect the included AC/DC power adapter to the antenna's power input port and then plug the adapter into a standard wall outlet.
    • Melalui USB: Connect the included USB power cable to the antenna's USB input port. Then, connect the other end of the USB cable to a free USB port on your TV or decoder (if compatible and provides 5V power).
  4. Imbasan Saluran: Access the menu on your TV or decoder and perform an automatic channel scan. Refer to your TV or decoder's manual for specific instructions on how to do this.
belakang view of Meliconi AT55 antenna showing power and coaxial cable connections

Imej 1: belakang view of the Meliconi AT55 antenna, illustrating the power input and coaxial cable connection points. The antenna features a curved black design with a sturdy base.

Depan view of Meliconi AT55 antenna

Imej 2: Depan view of the Meliconi AT55 antenna, showcasing its sleek, curved black design. The Meliconi logo is subtly visible on the lower left portion of the antenna's face.

5. Arahan Operasi

Once the antenna is set up and channels are scanned, operation is straightforward:

  • Pemilihan Saluran: Use your TV or decoder remote control to select desired channels.
  • Pengoptimuman Isyarat: If you experience poor signal quality on certain channels, try slightly adjusting the antenna's position or orientation. Perform another channel scan after significant adjustments.
  • Penunjuk Kuasa: The antenna typically features an LED indicator to confirm it is receiving power.

6. Penyelenggaraan

The Meliconi AT55 antenna requires minimal maintenance:

  • Pembersihan: Wipe the antenna with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Storan: If storing the antenna for an extended period, disconnect it from power and store it in a cool, dry place.

7. Penyelesaian masalah

If you encounter issues with your antenna, refer to the following troubleshooting guide:

MasalahKemungkinan PuncaPenyelesaian
Tiada isyarat atau kualiti gambar yang lemah
  • Incorrect antenna placement
  • Sambungan kabel longgar
  • Tiada kuasa untuk amplebih hidup
  • Distance from transmitter/repeater
  • Obstructions (walls, buildings)
  • Adjust antenna position, try near a window.
  • Pastikan semua kabel disambungkan dengan selamat.
  • Verify power adapter or USB cable is properly connected and functioning.
  • Perform a new channel scan on your TV/decoder.
  • Note: The antenna's effective range is up to 30 km from a repeater. Significant barriers can impede signal reception.
Interference from mobile signals (4G/5G)Antenna is designed with built-in filters.The AT55 includes integrated 4G and 5G interference filters. Ensure the antenna is powered correctly for the amplifier and filters to function optimally.
Antenna not powering on
  • Power adapter/USB cable issue
  • Isu salur keluar kuasa
  • Check if the power adapter is securely plugged in and the outlet is functional.
  • If using USB power, ensure the TV/decoder USB port provides 5V power.
  • Try an alternative power source (e.g., wall adapter instead of USB, or vice versa).

8. Spesifikasi

  • Jenama: Meliconi
  • Nombor Model: 881016
  • Jenis Produk: AmpAntena TV Dalaman dipasang
  • warna: Hitam
  • Keserasian: DVB-T, DVB-T HD, DVB-T2 HEVC, DAB+ Radio
  • Julat Kekerapan: VHF (174 ~ 230 MHz), UHF (470 ~ 694 MHz)
  • Interference Filters: 4G, 5G
  • Rajah Bunyi: <1 dB
  • Julat Maksimum: Up to 30 km from repeater
  • Bekalan Kuasa: AC/DC Adapter (230V) or USB (5V)
  • Dimensi (L x W x H): 27.5 cm x 5.5 cm x 13.1 cm
  • Jenama TV yang Serasi: Samsung, LG, Sony, Philips, Panasonic, United, Telefunken, Hitachi, Haier, OK, Kennex, Toshiba, Sharp, Thomson

9. Waranti dan Sokongan

Meliconi products are manufactured to high-quality standards and come with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact Meliconi customer support.

For technical assistance or support, please contact Meliconi directly:

Meliconi technical support contact information

Imej 3: Meliconi technical support contact details, including email address and phone number, for customer assistance.

Dokumen Berkaitan - AT55

Praview Meliconi AT52 R1 AmpArahan Antena TV Dalaman
User manual and instructions for the Meliconi AT52 R1 amplified indoor TV antenna, covering installation, operation, and technical specifications. This antenna receives digital terrestrial TV (DVB-T/DVB-T2) and DAB+ radio signals.
Praview Meliconi AMP 200 Isyarat Dalaman Amplifier Arahan Pengguna
User instructions for the Meliconi AMP 200 indoor signal amplifier. This guide details the product's features, safety warnings, installation steps, and technical specifications for improving signal reception.
Praview Manual Pengguna Alat Kawalan Jauh Universal Meliconi Fully 8.1
Manual pengguna untuk alat kawalan jauh universal Meliconi Fully 8.1. Panduan ini memberikan arahan terperinci tentang cara menyediakan, memprogram dan menggunakan alat kawalan jauh untuk mengawal sehingga 8 jenis peranti yang berbeza termasuk TV, penerima satelit, pemain DVD/Blu-ray dan banyak lagi. Ketahui tentang carian kod manual, kemasukan kod langsung, fungsi MEMO untuk urutan rakaman dan penyelesaian masalah biasa. Termasuk amaran keselamatan, maklumat bateri dan butiran waranti.
Praview Panduan Permulaan Pantas Alat Kawalan Jauh Universal Easytel TV | Meliconi
Ketahui cara menyediakan dan memprogram alat kawalan jauh universal TV Meliconi Easytel anda dengan panduan permulaan pantas ini. Termasuk arahan untuk mencari, memasukkan dan menyelesaikan masalah kod.
Praview Meliconi TLC evo 1 Quick Guide: SAMSUNG TV Remote Control
A quick guide for the Meliconi TLC evo 1 remote control, designed for SAMSUNG digital TVs. Learn how to set up and troubleshoot your remote, including battery testing and warranty information.
Praview Meliconi Personal3+ Quick Guide: Setup and Usage for SONY TVs
This quick guide provides essential information for setting up and using the Meliconi Personal3+ remote control (model PJN240023) with SONY digital televisions. Learn about initial setup, battery testing, and basic functions.