Manual Pengguna

1. Pengenalan

Terima kasih kerana membeliasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

Rajah 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. Maklumat Keselamatan Penting

AMARAN: Risiko Kejutan Elektrik. Putuskan kuasa pada kotak fius atau pemutus litar sebelum pemasangan atau servis.

• Baca semua arahan dengan teliti sebelum memulakan pemasangan.
• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC). Rujuk juruelektrik bertauliah jika anda tidak biasa dengan sambungan pendawaian elektrik yang betul.
• Use only UL-listed wire connectors for the electrical connections.
• Jangan melebihi wat maksimumtage specified for this fixture (14 Watts per bulb).
• Pakai cermin mata keselamatan dan peralatan pelindung yang sesuai semasa pemasangan.
• Pastikan lekapan dibumikan dengan betul.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• Mounting Hardware (screws, wire nuts, mounting bracket)
• Note: Light bulbs are NOT included.

4. Spesifikasi

5. Persediaan dan Pemasangan

Alat yang Diperlukan: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

Langkah Pra-Pemasangan:

1. Matikan kuasa: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. Sediakan kawasan: Clear the work area and ensure you have stable footing if using a ladder.
3. Bongkar: Carefully remove the fixture and all components from the packaging.

Langkah Pemasangan:

1. Pasang Pendakap Pelekap: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Sambungkan Wayar Elektrik:
   • Sambungkan hitam wayar (panas) dari siling ke hitam wire of the fixture using a wire nut.
   • Sambungkan putih wayar (neutral) dari siling ke putih wire of the fixture using a wire nut.
   • Sambungkan tanah wire (bare copper or green) from the ceiling to the tanah wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. Secure Fixture to Mounting Bracket: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. Pasang Mentol Lampu: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. Pasang Teduh Kaca: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar.

6. Arahan Operasi

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. Penjagaan dan Penyelenggaraan

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• Membersihkan Perlawanan: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• Penggantian mentol: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage dan jenis asas.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. Penyelesaian masalah

Jika anda menghadapi masalah dengan lekapan lampu anda, rujuk masalah dan penyelesaian biasa berikut:

• Lampu tidak menyala:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• Kelipan cahaya:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

9. Waranti dan Sokongan Pelanggan

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website or the contact information provided in your product packaging. Please have your model number (40804) and purchase details ready when contacting support.