Automatic Mini Double Station Mug Heat Press Transfer Machine User Manual

1. Pengenalan

This manual provides essential instructions for the safe and efficient operation of your Automatic Mini Double Station Mug Heat Press Transfer Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

This machine is designed for sublimation printing on various mug sizes, featuring a double station design for increased efficiency.

2. Arahan Keselamatan

• Always operate the machine on a stable, heat-resistant surface.
• Keep hands clear of heating elements during operation to prevent burns.
• Pastikan pengudaraan yang betul di kawasan kerja.
• Do not expose the machine to water or excessive moisture.
• Cabut plag mesin daripada soket kuasa apabila tidak digunakan atau sebelum pembersihan/penyelenggaraan.
• Do not attempt to modify or repair the machine yourself. Contact qualified personnel for service.
• Jauhkan kanak-kanak dan haiwan peliharaan daripada mesin yang sedang beroperasi.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1x Double Mug Heat Press Machine
• 1x Manual Pengguna Bahasa Inggeris (dokumen ini)
• 2x 11oz Heating Pads (pre-installed or included separately)

Jika ada item yang hilang atau rosak, sila hubungi sokongan pelanggan.

4. Persediaan

1. Membongkar: Carefully remove the heat press machine from its packaging. Retain packaging for future storage or transport.
2. penempatan: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the machine for ventilation and safe operation.
3. Sambungan Kuasa: Ensure the machine's power switch is in the OFF position. Plug the machine into a standard 110V AC power outlet.
4. Pemeriksaan Awal: Before first use, inspect the heating pads and control panel for any visible damage.

Rajah 1: Depan view of the Double Mug Heat Press Machine. This image shows the overall design with two mug stations and the central control panel.

5. Arahan Operasi

5.1 Panel Kawalan Selesaiview

Figure 2: Close-up of the LCD control panel. The panel features an LCD display for temperature and time, along with buttons for timing, temperature adjustment, and mode selection for left and right stations.

The machine features an LCD control panel for setting temperature and time. It allows for independent control of each mug station.

5.2 Langkah Operasi Asas

1. Hidupkan kuasa: Turn on the main power switch. The LCD display will illuminate.
2. Tetapkan Suhu: Use the temperature adjustment buttons (often indicated by '+' and '-' or specific temperature setting buttons) to set the desired transfer temperature. The recommended transfer temperature is 180°C (356°F).
3. Tetapkan Masa: Use the timing adjustment buttons to set the desired transfer time. The recommended transfer time is 90 seconds.
4. Panaskan: Allow the machine to preheat until it reaches the set temperature. The display will show the current temperature.
5. Prepare Mug: Wrap your sublimation print around the mug, securing it with heat-resistant tape. Ensure the print is flat against the mug surface.
6. Insert Mug: Carefully place the prepared mug into the heating pad of one or both stations. Ensure the mug is centered and the heating pad fully encompasses the printed area.
7. Kenakan Tekanan: Tutup clamp handle to apply even pressure to the mug. The machine is designed to accommodate various mug sizes (6OZ, 9OZ, 11OZ, 12OZ, 17OZ) with appropriate heating pads.
8. Start Transfer: Press the start button (often labeled 'Timing' or 'Start') for the respective station. The timer will begin counting down.
9. Remove Mug: Once the timer reaches zero, carefully open the clamp handle and remove the hot mug using heat-resistant gloves.
10. Sejukkan Diri: Place the mug on a heat-resistant surface to cool. Once cool, carefully remove the sublimation paper.

Figure 3: A mug correctly positioned within the heating element of the heat press machine, ready for the sublimation process.

5.3 Workflow Diagram

Figure 4: A visual representation of the sublimation printing process, from designing and printing the image to pressing it onto the mug and the final result.

5.4 Replacing Heating Pads

The heating pads are replaceable to accommodate different mug sizes. The machine includes two 11oz heating pads. For other sizes, contact customer support.

Rajah 5: Satu terperinci view of the heating element, showing its construction and how it secures the mug for heat transfer.

1. Matikan dan Cabut plag: Ensure the machine is turned off and unplugged from the power source. Allow the heating pads to cool completely.
2. Loosen Fasteners: Locate the fasteners securing the heating pad to the machine frame. Loosen or remove them as required.
3. Disconnect Pad: Carefully disconnect the electrical connector for the heating pad.
4. Remove Old Pad: Slide out the old heating pad.
5. Install New Pad: Insert the new heating pad, ensuring it is correctly aligned.
6. Sambung dan Selamatkan: Reconnect the electrical connector and secure the heating pad with the fasteners.
7. Ujian: Plug in the machine and perform a test run to ensure the new heating pad functions correctly.

6. Penyelenggaraan

• Pembersihan: After each use, ensure the machine is cool and unplugged. Wipe down the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Heating Pad Care: Inspect heating pads regularly for wear or damage. Replace if necessary to ensure consistent heat transfer.
• Storan: Simpan mesin dalam persekitaran yang kering dan bebas habuk apabila tidak digunakan.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

No specific warranty information is provided with this product. For technical support, replacement parts (such as different sized heating pads), or any operational questions, please refer to the seller or manufacturer's contact information provided at the point of purchase.