1. Produk Lebihview
This manual provides instructions for the Transformers E0767 Shatter Energon Igniters Action Figure. This figure is designed to convert between robot and jet modes in 5 steps and features an Energon Igniter core for enhanced play.
- Jenama: Transformers
- Nombor Model: E0767
- Dimensi Produk: 2.38 x 7 x 6 inci
- Berat Barang: 3.17 auns
- Umur Disyorkan: 5 tahun dan ke atas
The Shatter figure is part of the Transformers universe, allowing users to engage in imaginative play by transforming the character between its distinct modes.
Figure packaging displaying the Transformers Shatter character in both robot and jet forms.
2. Maklumat Keselamatan
Please read and understand all safety information before using this product.
- Amaran: Small parts may be generated. This product is not suitable for children under 3 years due to potential choking hazards.
- Pengawasan orang dewasa disyorkan semasa bermain, terutamanya untuk kanak-kanak yang lebih kecil.
- Avoid forcing parts during transformation to prevent breakage.
3. Transformation Instructions
The Transformers E0767 Shatter figure converts between robot mode and jet mode in 5 steps. Refer to the included visual instructions on the product packaging or the general transformation video for guidance.
3.1. Jet Mode to Robot Mode
To transform Shatter from jet mode to robot mode, carefully manipulate the figure's components. The transformation involves a sequence of folding and unfolding parts to reveal the robot form. Ensure each joint clicks into place securely.
The Shatter figure displayed in its sleek jet mode.
The Shatter figure in its robot mode, ready for action.
3.2. Robot Mode to Jet Mode
To convert Shatter back to jet mode, reverse the transformation steps. Fold the robot's limbs and body panels to form the jet's fuselage and wings. Pay attention to alignment to ensure a complete and secure transformation.
3.3. Energon Igniters Feature
The Energon Igniters feature allows for dynamic action. Locate the designated slot on the figure (typically on the back or top in vehicle mode) and insert the Energon Igniter core. Pressing down on the core activates a spinning action, simulating the power of Energon.
Activating the Energon Igniter by pressing down on the core in jet mode.
Removing the Energon Igniter core from the figure.
For a visual demonstration of the Energon Igniters feature and general transformations, please refer to the video below.
Official demonstration video showcasing various Transformers figures, including transformations and the Energon Igniters feature. This video provides a general overview of the play pattern for the Energon Igniters line.
4. Mengendalikan Rajah
Once transformed into either robot or jet mode, the figure can be posed for display or used in imaginative play scenarios. The Energon Igniter core can be inserted and activated in vehicle mode to simulate power-up effects.
- Ensure all parts are securely connected after transformation to maintain stability during play.
- Avoid excessive force when posing joints to prevent damage.
5. Penyelenggaraan dan Penjagaan
To ensure the longevity of your Transformers figure, follow these care guidelines:
- Pembersihan: Wipe the figure with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storan: Simpan rajah di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Pengendalian: Handle the figure with care, especially during transformations, to avoid stress on joints and small parts.
6. Penyelesaian masalah
Jika anda menghadapi sebarang masalah dengan bentuk badan anda, pertimbangkan perkara berikut:
- Difficulty Transforming: Ensure you are following the correct sequence of steps. Do not force parts; if a part is stuck, gently re-examine the transformation path.
- Sendi Longgar: Over time, joints may become slightly loose with repeated use. This is normal wear and tear for action figures.
- Bahagian yang hilang: Check the packaging thoroughly. If a part is genuinely missing upon purchase, contact the retailer or manufacturer.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Dimensi Produk | 2.38 x 7 x 6 inci |
| Berat Barang | 3.17 auns |
| ASIN | B075LNDNBH |
| Nombor Model Item | E0767 |
| Umur Disyorkan Pengilang | 5 tahun dan ke atas |
| Tarikh Tayangan | 20 April 2018 |
| Pengeluar | Hasbro |
| Komponen yang Disertakan | Action Figure (Shatter) |
8. Waranti dan Sokongan
Specific warranty information for this product is not provided in the available data. For warranty details, product support, or to inquire about replacement parts, please contact Hasbro customer service directly or refer to their official webtapak.
You can visit the official Transformers store for more information:
