Blum B970.1002-5

Blum Blumotion Soft Close Damper

Model: B970.1002-5

1. Pengenalan

Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion damppertama

2. Maklumat Keselamatan

3. Kandungan Pakej

Pakej anda harus mengandungi item berikut:

4. Pemasangan

The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:

  1. Identify Installation Location: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
  2. Gerudi Lubang: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
  3. Masukkan Damper: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the dampeh.
  4. Kefungsian Ujian: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.
Blum Blumotion Soft Close Damper, angled view

Rajah 1: Bersudut view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.

Blum Blumotion Soft Close Damper, straight view

Figure 2: Straight-on view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.

5. Operasi

Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.

6. Penyelenggaraan

The Blumotion Soft Close Damper requires minimal maintenance:

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Door does not close softly.Damper not making proper contact with the door, or door is too heavy for a single dampeh.Pastikan damper is positioned correctly. For heavier doors, consider installing an additional dampeh.
Damper falls out of the hole.Hole is too large, or damper was not fully inserted.Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it.
Door still slams.Damper is faulty or not installed correctly.Verify installation steps. If the issue persists, the damper may need replacement.

8. Spesifikasi

9. Waranti dan Sokongan

For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Blum Official Webtapak: www.blum.com

Dokumen Berkaitan - B970.1002-5

Praview Perkakasan Blum: Pelarasan Mudah untuk Reka Bentuk Kabinet Tanpa Cacat
Temui cara sistem angkat inovatif, sistem kotak, sistem engsel dan sistem poket Blum membolehkan pelarasan 3 dimensi yang mudah untuk penjajaran kabinet yang sempurna dan reka bentuk yang sempurna. Ketahui tentang Apl EASY ASSEMBLY untuk panduan pantas.
Praview Blum AVENTOS Lift Systems: Enhance Your Cabinetry
Explore Blum's innovative AVENTOS lift systems for upper cabinets. Discover solutions for effortless access, smooth operation, and soft closing, designed to enhance kitchen and living spaces. Find detailed specifications and ordering information.
Praview Blum TIP-ON BLUMOTION for TANDEMBOX: Features, Planning, and Ordering
Comprehensive guide to Blum's TIP-ON BLUMOTION system for TANDEMBOX drawers, detailing features, technical specifications, ordering information, and planning requirements for smooth and silent drawer operation.
Praview Blum TANDEM plus BLUMOTION 563F Installation Instructions & Specifications
Installation instructions and specifications for Blum TANDEM plus BLUMOTION 563F full extension concealed drawer runners. Covers drawer box preparation, mounting, adjustments, and application types (face frame, frameless, inset).
Praview Blum REVEGO Pocketsysteme: Planungs- und Bestellinformationen
Entdecken Sie REVEGO Pocketsysteme von Blum für moderne Raumkonzepte. Dieses Dokument bietet detaillierte Planungs-, Auswahl- und Bestellinformationen für Einzeltür- und Doppeltüranwendungen.
Praview Sistem Angkat Blum AVENTOS: Panduan Produk Komprehensif
Terokai sistem lif AVENTOS yang inovatif daripada Blum, yang direka untuk dapur dan kabinet moden. Temui ciri, aplikasi, perancangan dan butiran pemasangan untuk pelbagai model seperti HF, HS, HL, HK, HK-S dan HK-XS, termasuk penyelesaian SERVO-DRIVE dan TIP-ON.