KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer Instruction Manual

1. Produk Lebihview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

2. Persediaan

2.1 Pemasangan Bateri

The KWANWA KW715S operates on 2x bateri alkali AA (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 Penetapan Masa Awal

1. Tekan dan tahan butang MASA DITETAPKAN button (located on the back) for 2 seconds until the hour digits begin to flash.
2. Gunakan JAM dan MIN butang untuk melaraskan masa.
3. Tekan MASA DITETAPKAN sekali lagi untuk mengesahkan dan keluar dari mod tetapan masa.

2.3 Pemilihan Unit Suhu (°C/°F)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

3. Arahan Operasi

3.1 Menetapkan Penggera

1. Tekan dan tahan butang SET AL button (on the back) for 2 seconds until the alarm hour digits flash.
2. Gunakan JAM dan MIN butang untuk menetapkan masa penggera yang anda inginkan.
3. Tekan SET AL again to confirm and exit alarm setting mode.

3.2 Penggera Hidup/Mati

Gunakan AL HIDUP/MATI switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 Fungsi Tunda

When the alarm sounds, gently touch the large MENGEJUTKAN button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

3.4 Adjustable Brightness

Tekan ke MASA DITETAPKAN button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated 12/24HR butang).

4. Penyelenggaraan

4.1 Penggantian Bateri

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 Pembersihan

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. Penyelesaian masalah

• Paparan berkelip: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
• Penggera Tidak Berbunyi: Memastikan AL HIDUP/MATI switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
• Incorrect Time/Temperature: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
• Penunjuk Bateri Rendah: This icon signals that the batteries are running low and should be replaced soon.

6. Spesifikasi

7. Waranti dan Sokongan

For warranty information or product support, please contact KWANWA customer service at: support@odokeeshop.com.