1. Produk Lebihview
The ORNO PRE-427 is a mechanical timer designed to control the on/off cycles of electrical devices connected to a Schuko socket. It operates on a 24-hour cycle, allowing users to program specific intervals for power delivery. This timer is ideal for automating lights, appliances, or other electrical equipment within its specified load capacity.
2. Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum menggunakan peranti.
- Jangan melebihi kapasiti beban maksimum 3680 W (16 A) to prevent overheating and potential damage.
- Peranti ini direka untuk kegunaan dalaman sahaja (IP20 protection class). Do not expose it to water, rain, or excessive moisture.
- Ensure the timer is securely plugged into a properly grounded 230V ~ 50Hz wall outlet.
- Do not disassemble, modify, or attempt to repair the device. Refer all servicing to qualified personnel.
- Jauhkan daripada kanak-kanak.
3. Arahan Persediaan
- Buka Pemasa: Carefully remove the ORNO PRE-427 mechanical timer from its packaging.
- Palamkan ke dalam Soket Dinding: Insert the timer into a standard 230V ~ 50Hz Schuko wall socket. Ensure it is firmly seated.
This image shows the ORNO PRE-427 mechanical timer plugged into a wall socket, ready for use. The blue dial and the integrated Schuko outlet are clearly visible.
- Sambung Perkakas: Plug the electrical device you wish to control into the Schuko socket located on the front of the timer.
This image illustrates the ORNO PRE-427 mechanical timer plugged into a wall outlet, with an electrical appliance (a heater) connected to the timer's integrated socket.
4. Arahan Operasi
The ORNO PRE-427 timer features a 24-hour rotating dial with segments that allow you to set specific on/off times. Each segment represents a 30-minute interval.
Imej ini menyediakan jarak dekat view of the ORNO PRE-427 mechanical timer, highlighting its blue 24-hour dial with numbered segments and the integrated Schuko socket.
- Tetapkan Masa Semasa: Rotate the entire dial clockwise until the current time aligns with the arrow indicator located on the timer's body. The dial is marked from 1 to 24 hours.
- Program On/Off Times:
- The blue segments around the dial control the power to the connected appliance.
- To set a period for the connected appliance to be ON, push the corresponding segments ke bawah.
- To set a period for the connected appliance to be DIMATIKAN, leave the corresponding segments in their ke atas kedudukan.
- Each segment pushed down activates the power for 30 minutes. For example, pushing down two consecutive segments will provide power for one hour.
This image shows the ORNO PRE-427 mechanical timer with an appliance plugged in. The blue dial's segments are visible, demonstrating how they can be pushed down to program the timer.
5. Penyelenggaraan
- Pembersihan: Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents.
- Storan: Simpan pemasa di tempat yang sejuk dan kering apabila tidak digunakan.
6. Penyelesaian masalah
- Appliance not turning on/off as programmed:
- Check if the timer is securely plugged into the wall socket.
- Ensure the appliance is correctly plugged into the timer.
- Verify that the blue segments are pushed down for the desired "ON" periods and up for "OFF" periods.
- Confirm the current time is correctly set on the dial, aligning with the arrow indicator.
- Check if the appliance itself is functioning correctly when plugged directly into a wall socket.
- Dail pemasa tidak bergerak:
- Ensure the timer is receiving power from the wall socket.
- The timer is mechanical; if it stops moving, it may indicate a malfunction. Do not attempt to repair it.
7. Spesifikasi
This image visually summarizes key electrical specifications of the ORNO PRE-427 timer, including 230V~50Hz power supply, 3500W maximum load, and 16A current rating.
| Ciri | Perincian |
|---|---|
| Jenama | Orno |
| Nombor Model | PRE-427 (OR-CR-209) |
| taip | Pemasa Mekanikal |
| Bekalan Voltage | 230 V ~ 50 Hz |
| Maks. Had muatan | 3680 W |
| semasa | 16 A (2) |
| Jenis Soket | 2P+Z, Schuko (Type F) |
| Minimum On/Off Interval | 30 minit |
| Kelas Perlindungan | IP20 (Penggunaan dalaman sahaja) |
| bahan | plastik |
| Dimensi (W x H x D) | 60 x 96 x 67 mm (2.36 x 3.78 x 2.64 inci) |
| Berat Barang | 95 Gram (3.35 auns) |
| GTIN (Nombor Pengenalan Perdagangan Global) | 05902560323085 |
This image displays the ORNO PRE-427 mechanical timer with its physical dimensions labeled in both centimeters and inches, indicating its width, height, and depth.
8. Waranti dan Sokongan
For technical support, warranty inquiries, or further assistance, please contact Orno customer service using the information below:
- Pengeluar: ORNO-LOGISTIC Sp. z oo
- Alamat: ul. Rolników 437, 44-141 Gliwice, POLAND
- Webtapak: www.orno.pl
This image shows the product's barcode (OR-PRE-427(GS) and GTIN 5902560323085) along with the manufacturer's details: ORNO-LOGISTIC Sp. z o.o., address in Gliwice, Poland, and website www.orno.pl. It also includes CE and WEEE symbols.
