pengenalan
Thank you for choosing the TFA Dostmann 60.5013.01 Projection Alarm Clock. This device offers precise timekeeping through radio control, projects time and temperature, features dual alarms, and includes a convenient USB charging port for mobile devices. Please read this manual carefully to ensure proper setup and operation.
Maklumat Keselamatan
- Jauhkan peranti daripada air dan kelembapan yang tinggi.
- Jangan dedahkan kepada suhu yang melampau atau cahaya matahari langsung.
- Gunakan hanya penyesuai kuasa yang disediakan.
- Jangan cuba membuka atau membaiki peranti sendiri.
- Buang bateri mengikut peraturan tempatan.
Kandungan Pakej
- TFA Dostmann 60.5013.01 Projection Alarm Clock
- Penyesuai Kuasa
- Manual Arahan (dokumen ini)
Produk Selesaiview
Biasakan diri anda dengan komponen dan kawalan utama jam loceng anda.
Rajah 1: Depan view of the TFA Dostmann 60.5013.01 Projection Alarm Clock showing the digital display with time, date, and alarm settings.
Rajah 2: The TFA Dostmann 60.5013.01 Projection Alarm Clock projecting the time onto a wall.
Rajah 3: sebelah view of the TFA Dostmann 60.5013.01 Projection Alarm Clock, highlighting the USB charging port and power input.
Controls and Display Elements:
- paparan: Shows time, date, day of the week, indoor temperature, and alarm status.
- Kanta Tayangan: Projects time or time/temperature onto a surface.
- TEMP/FLIP Button: Toggles temperature display or flips projection.
- Butang MOD: Cycles through display modes and enters setting modes.
- Butang ATAS/BAWAH: Adjust values during settings, activate/deactivate alarms.
- WAVE Button: Initiates manual radio signal search.
- SNOOZE/LIGHT Button: Activates snooze, adjusts backlight brightness.
- Port Pengecasan USB: For charging external mobile devices (Output: 5V DC, 500mA).
- Input DC 5V: Sambungan penyesuai kuasa.
- CONTINUE PROJECTION Switch: Enables continuous projection (only with power adapter).
Persediaan
1. Mengkuasakan Peranti
- Insert 2 x 1.5V AAA batteries (not included) into the battery compartment. These serve as backup power.
- Connect the provided power adapter to the DC 5V input on the side of the clock and plug it into a power outlet. The display will light up.
2. Initial Radio-Controlled Time Synchronization
Upon initial power-up, the clock will automatically attempt to synchronize with the DCF radio signal. This process can take several minutes. During synchronization, a radio tower icon will flash on the display. Once successful, the icon will become solid, and the correct time will be displayed.
- Place the clock near a window for better reception.
- If synchronization fails, the clock will operate as a standard quartz clock. You can manually set the time (see 'Setting Time and Date').
- To manually initiate a radio signal search, press and hold the GELOMBANG butang.
Arahan Operasi
Menetapkan Masa dan Tarikh
- Dalam mod paparan masa biasa, tekan dan tahan butang MODE butang selama 3 saat untuk memasuki mod tetapan masa. Digit jam akan berkelip.
- Gunakan UP or TURUN butang untuk melaraskan jam.
- Tekan MODE again to confirm the hour and move to minute setting. Adjust with UP/TURUN.
- Teruskan menekan MODE to cycle through and set year, month, day, and 12/24-hour format.
- Tekan MODE one last time or wait 15 seconds for the settings to be saved and exit setting mode.
Setting Alarms (AL1 and AL2)
This clock features two independent alarms.
- Dalam mod paparan masa biasa, tekan butang MODE button repeatedly until 'AL1' or 'AL2' is displayed.
- Tekan dan tahan butang MODE butang selama 3 saat. Angka jam penggera akan berkelip.
- Gunakan UP or TURUN butang untuk menetapkan jam penggera yang diingini.
- Tekan MODE to confirm and move to minute setting. Adjust with UP/TURUN.
- Tekan MODE sekali lagi untuk menyimpan dan keluar.
- To activate an alarm, press the UP button when 'AL1' or 'AL2' is displayed. A bell icon will appear next to the alarm number. Press TURUN untuk menyahaktifkan.
Fungsi Tunda
- Apabila penggera berbunyi, tekan butang SNOOZE / CAHAYA button to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again.
- To stop the alarm completely, press any other button (e.g., MODE, UP, TURUN).
Fungsi Unjuran
- To activate the projection, press the SNOOZE / CAHAYA button. The projection will turn on for a few seconds.
- For continuous projection, slide the 'CONTINUE PROJECTION' switch on the side of the clock to the 'ON' position. This function works only when the clock is powered by the adapter.
- To rotate the projected image, adjust the projection lens on the side of the clock.
- To switch between projecting time only or time and temperature, press the TEMP/FLIP butang.
Paparan Suhu
- The clock displays indoor temperature.
- Untuk bertukar antara Celsius (°C) dan Fahrenheit (°F), tekan dan tahan butang TEMP/FLIP butang.
Port Pengecasan USB
- Connect your mobile device's USB charging cable to the USB charging port on the side of the clock.
- The port provides 5V DC, 500mA output for charging smartphones or tablets.
Lampu latar
- Tekan ke SNOOZE / CAHAYA button to temporarily illuminate the display.
- When powered by the adapter, the backlight can be set to a continuous low brightness.
Penyelenggaraan
- Bersihkan peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
- If the display becomes dim or the radio control signal is lost frequently, replace the backup batteries.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada paparan atau paparan malap | Power adapter not connected or faulty; backup batteries low. | Ensure power adapter is securely connected. Replace backup batteries. |
| Masa yang salah dipaparkan | Radio signal not received; manual time not set. | Move the clock to a location with better reception. Manually initiate radio signal search (press GELOMBANG). Set time manually if radio control is unavailable. |
| Projection is blurry or upside down | Projection lens needs adjustment. | Rotate the projection lens to focus the image. Use the TEMP/FLIP button to flip the projection orientation. |
| Penggera tidak berbunyi | Alarm not activated; alarm volume too low (if adjustable). | Ensure the alarm bell icon is displayed for the desired alarm (AL1 or AL2). |
| Pengecasan USB tidak berfungsi | Clock not powered by adapter; device requires more than 500mA. | Ensure the clock is connected to the power adapter. Some devices may require higher charging current than 500mA. |
Spesifikasi
- model: TFA Dostmann 60.5013.01
- Dimensi: 126 x 53 x 93 mm
- Berat: 302 g
- Bekalan Kuasa: DC 5V (via power adapter)
- Bateri Sandaran: 2 x 1.5V AAA (tidak termasuk)
- Julat Pengukuran Suhu: 1°C hingga 40°C (33.8°F hingga 104°F)
- Output Pengecasan USB: 5V DC, 500mA
- Jenis Paparan: digital
- Ciri Khas: Radio-controlled time, Time/Temperature projection, Dual alarms, Snooze, Backlight, USB charging port.
Waranti dan Sokongan
For warranty information and customer support, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
