pengenalan
This manual provides comprehensive instructions for the installation, operation, programming, and maintenance of your Weiser SmartCode 10 Keyless Entry Deadbolt Lock. Please read this manual thoroughly before installation and use to ensure proper function and security.
Rajah 1: Luaran view of the Weiser SmartCode 10 Keyless Entry Deadbolt Lock in Polished Brass finish, showing the keypad and keyhole.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- Pemasangan Papan Kekunci Luaran
- Interior Assembly Unit
- selak
- Pukulan Pukulan
- Plat Pemasangan
- Cincin Penyesuai
- 2 Kekunci
- Skru
- Alat SmartKey
- 4 Bateri AA
- Panduan Pemasangan (manual ini)
Persediaan dan Pemasangan
Sebelum pemasangan, pastikan pintu anda memenuhi spesifikasi berikut:
- Door thickness: 1-3/8" to 2" (35mm - 51mm)
- Cross bore hole diameter: 2-1/8" (54mm)
- Backset: 2-3/8" or 2-3/4" (60mm or 70mm)
Alat yang Diperlukan:
- Pemutar Skru Kepala Phillips
- Pita Pengukur
- Pensel
Langkah Pemasangan:
- Sediakan Pintu: If replacing an existing lock, remove it. Ensure the door frame is properly prepared for the strike plate.
- Pasang Selak: Insert the latch into the door edge. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.
- Pasang Perhimpunan Luaran: Route the cable from the exterior keypad assembly through the cross bore hole. Position the exterior assembly flush against the door.
- Pasang Plat Pemasangan: Pasangkan plat pelekap pada pintu menggunakan skru yang disediakan, pastikan kabel melalui plat.
- Sambungkan Kabel: Sambungkan kabel dari pemasangan luaran ke pemasangan dalaman.
- Pasang Perhimpunan Dalaman: Attach the interior assembly to the mounting plate. Ensure the turn piece shaft engages correctly with the latch mechanism. Secure with screws.
- Pasang Bateri: Insert the 4 AA batteries into the battery pack of the interior assembly.
- Lakukan Proses Penyerahan Pintu: This step is crucial for the lock to learn the orientation of your door.
- With the door open and unlocked, press the "Lock" button on the keypad.
- The latch bolt should extend and retract. If it does not, repeat the process.
Rajah 2: The Weiser SmartCode 10 deadbolt lock installed on a dark wooden door, showcasing its integration with existing door hardware.
Arahan Operasi
Kod Pengguna Pengaturcaraan:
The lock supports up to 16 user codes and one master code. The master code is used to add or delete user codes and should be kept confidential.
- Set Master Code (First Time Only):
- Open the battery cover on the interior assembly.
- Press the "Program" button once.
- Enter a new 4-8 digit master code on the keypad.
- Tekan butang "Kunci".
- Re-enter the master code.
- Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
- Tambah Kod Pengguna:
- Buka penutup bateri.
- Press the "Program" button once.
- Masukkan kod induk.
- Tekan butang "Kunci".
- Masukkan kod pengguna 4-8 digit baharu.
- Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
- Padamkan Kod Pengguna:
- Buka penutup bateri.
- Press the "Program" button twice.
- Masukkan kod induk.
- Tekan butang "Kunci".
- Masukkan kod pengguna untuk dipadamkan.
- Press the "Lock" button. A successful deletion will be indicated by a green flash and a beep.
Mengunci Pintu:
- Dari Luaran: Press the "Lock" button on the keypad. The deadbolt will extend.
- Dari Dalam Negeri: Rotate the turn piece to the vertical position.
Membuka Kunci Pintu:
- Menggunakan papan kekunci: Enter a valid user code or master code. The deadbolt will retract.
- Menggunakan Kekunci: Insert the key into the keyhole and turn.
- Dari Dalam Negeri: Rotate the turn piece to the horizontal position.
Rajah 3: Dalaman view of the Weiser SmartCode 10 deadbolt lock, showing the battery compartment and turn piece.
Arahan Penandaan Semula SmartKey
The SmartKey feature allows you to re-key your lock to a new key in seconds. This is useful if you want to match your lock to an existing key or if you lose a key.
- Masukkan kunci berfungsi anda sepenuhnya ke dalam silinder.
- Putar kekunci 90 darjah mengikut arah jam.
- Insert the SmartKey tool firmly into the SmartKey hole.
- Tanggalkan alat SmartKey.
- Tanggalkan kunci anda yang berfungsi.
- Masukkan kunci baharu anda sepenuhnya ke dalam silinder.
- Putar kekunci baharu 90 darjah lawan arah jam.
- Rotate the new key 90 degrees clockwise again to ensure it functions correctly.
Rajah 4: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.
Penyelenggaraan
- Penggantian Bateri: When the batteries are low, the lock will emit a series of beeps and the keypad will flash red after locking/unlocking. Replace all four AA batteries promptly.
- Pembersihan: Clean the keypad and exterior finish with a soft, damp kain. Elakkan pembersih atau pelarut yang melelas, yang boleh merosakkan kemasan.
- Pelinciran: Periodically lubricate the latch bolt and deadbolt mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the key cylinder.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kunci tidak bertindak balas terhadap entri pad kekunci. | Bateri mati. | Gantikan keempat-empat bateri AA. |
| Keypad flashes red and beeps after code entry. | Incorrect code entered or low battery. | Verify the code. Replace batteries if low battery indicator was present. |
| Deadbolt tidak memanjang/menarik balik sepenuhnya. | Door handing process not completed or door alignment issue. | Perform the door handing process again. Check door and frame for proper alignment. |
| Cannot program new codes. | Master code not set or incorrect master code used. | Ensure the master code is set. Use the correct master code for programming. |
Spesifikasi
- model: 9GED17000-001
- Selesai: Loyang Digilap
- Bahan: Tembaga
- Ketebalan pintu: 1-3/8" to 2" (35mm - 51mm)
- Lubang Salib: 2-1/8" (54mm)
- Set belakang: Boleh laras 2-3/8" atau 2-3/4" (60mm atau 70mm)
- Kod Pengguna: Sehingga 16 (4-8 digit)
- Sumber Kuasa: 4 Bateri Beralkali AA (termasuk)
- Ciri Khas: Keyless Entry, Backlit Keypad, One-Touch Locking, SmartKey Re-key Technology, Auto-Lock
- Dimensi Produk: 9.4 x 13.72 x 25.4 cm
- Berat Barang: 1.69 kg
Waranti dan Sokongan
This Weiser SmartCode 10 Keyless Entry Deadbolt Lock comes with a Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Weiser webtapak atau hubungi perkhidmatan pelanggan.
Pengeluar: Weiser
Webtapak: www.weiserlock.com (Cthamppautan le, pautan sebenar mungkin berbeza-beza)
Perkhidmatan Pelanggan: Rujuk Weiser webtapak untuk maklumat hubungan khusus untuk wilayah anda.
