pengenalan
The Weiser Phoenix Venetian Bronze Passage Door Knob is designed for interior doors that do not require a locking mechanism. This includes applications such as hallway doors and closet doors. Its traditional design and Venetian Bronze finish complement various home décors. The knob is reversible, allowing installation on both left-handed and right-handed doors.
Image: Weiser Phoenix Venetian Bronze Passage Door Knob, showcasing its traditional design and finish.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- 1 Set of Door Knobs (Interior and Exterior)
- 1 Latch mechanism
- 1 Strike plate
- Skru Pemasangan
- Manual Pemasangan
Spesifikasi Pintu
Ensure your door meets the following specifications for proper fit and function:
- Ketebalan pintu: 1-3/8 inches to 1-3/4 inches (35mm - 44mm)
- Latch Backset: Adjustable for 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
- Lubang Salib: 2-1/8 inci (54mm)
Persediaan dan Pemasangan
Installation of the Weiser Phoenix Passage Door Knob is designed to be straightforward and can typically be completed with a screwdriver.
- Sediakan Pintu: Ensure the door has the correct bore holes and backset. If replacing an existing knob, remove the old hardware.
- Pasang Selak: Insert the latch mechanism into the edge bore hole of the door. Ensure the latch bolt faces the door frame. Secure it with the provided screws. The latch is adjustable to fit either a 2-3/8 inch or 2-3/4 inch backset.
- Pasang Tombol Luaran: Place the exterior knob assembly through the 2-1/8 inch cross bore hole, ensuring the spindle aligns with the latch mechanism.
- Pasang Tombol Dalaman: Position the interior knob assembly over the spindle and align the mounting posts with the holes on the exterior assembly.
- Secure the Knobs: Fasten the interior and exterior knob assemblies together using the provided screws. Tighten securely, but do not overtighten, to ensure smooth operation.
- Pasang Plat Strike: Pasangkan plat penekan pada bingkai pintu, sejajarkannya dengan bolt selak. Kencangkan dengan skru.
- Operasi Ujian: Open and close the door several times, turning the knobs to ensure the latch retracts and extends smoothly without binding.
Arahan Operasi
The Weiser Phoenix Passage Door Knob is a non-locking mechanism designed for easy access. To open a door equipped with this knob:
- Grasp either the interior or exterior knob.
- Turn the knob in either direction (clockwise or counter-clockwise).
- Push or pull the door open.
The latch will retract when the knob is turned and extend automatically when the door is closed, holding the door in place without locking it.
Penjagaan dan Penyelenggaraan
To maintain the appearance and functionality of your Weiser Phoenix Door Knob, follow these guidelines:
- Pembersihan: Clean the knob with a soft, damp kain. Elakkan pembersih yang melelas, pelarut, atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
- Pelinciran: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the latch bolt. Do not use oil-based lubricants, as they can attract dust and debris.
- Mengetatkan: Periodically check the mounting screws for tightness. If the knobs feel loose, gently tighten the screws to ensure secure attachment.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tombol longgar atau goyah. | Skru pemasangan longgar. | Tighten the mounting screws connecting the interior and exterior knob assemblies. |
| Selak tidak ditarik balik dengan lancar. | Debris in the latch mechanism or lack of lubrication. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant to the latch bolt. |
| Pintu tidak tertutup dengan betul atau berderak. | Strike plate misalignment. | Adjust the position of the strike plate on the door frame to ensure proper alignment with the latch bolt. |
| Knob is difficult to turn. | Over-tightened mounting screws or misaligned components. | Loosen mounting screws slightly and re-test. Ensure all components are correctly aligned during installation. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Weiser |
| Nombor Model | 9GA1010-015 |
| Gaya | Hall/Closet (Passage) |
| warna | Gangsa Venesia |
| Selesai | Disikat |
| bentuk | Bulat |
| Jenis Pemegang | Tombol |
| Jenis Kunci | Tanpa Kunci |
| Keserasian Ketebalan Pintu | 1-3/8" - 1-3/4" |
| Set Belakang Selak | Adjustable 2-3/8" - 2-3/4" |
| Lubang Silang | 2-1/8" |
| Berat Barang | 480 g |
| Dimensi Produk | 11.58 x 7.59 x 7.59 cm |
| Ciri Khas | Mudah Dipasang |
Maklumat Waranti
This Weiser product comes with a Waranti 30 hari. For specific details regarding mechanical and finish warranties, please refer to the documentation included with your purchase or visit the official Weiser webtapak.
Sokongan Pelanggan
For further assistance, technical support, or warranty claims, please contact Weiser customer service. You can find contact information and additional resources on the official Weiser webtapak:
Visit Weiser's Official Webtapak
Please have your model number (9GA1010-015) and purchase information ready when contacting support.
