VonHaus 600W Corded 2-in-1 Stick Vacuum Cleaner Instruction Manual

1. Maklumat Keselamatan Penting

Please read all instructions carefully before using your VonHaus 600W Corded 2-in-1 Stick Vacuum Cleaner. Retain this manual for future reference.

• Always ensure the appliance is unplugged from the power supply before assembling, disassembling, or cleaning.
• Jangan gunakan perkakas pada permukaan basah atau untuk mengambil cecair.
• Jauhkan rambut, pakaian longgar, jari dan semua bahagian badan daripada bukaan dan bahagian yang bergerak.
• Jangan ambil apa-apa yang terbakar atau berasap, seperti rokok, mancis, atau abu panas.
• Gunakan hanya seperti yang diterangkan dalam manual ini. Gunakan hanya lampiran yang disyorkan pengilang.
• Jangan gunakan tanpa cawan habuk dan/atau penapis di tempatnya.
• Jika kord bekalan rosak, ia mesti diganti oleh pengilang, ejen perkhidmatannya, atau orang yang berkelayakan yang serupa untuk mengelakkan bahaya.

2. Kandungan Pakej

Pastikan semua komponen berada dalam keadaan baik dan lengkap:

• Unit Vakum Utama
• Pemegang Boleh Dipanjangkan
• Kepala Berus Lantai
• Alat Celah
• Lekapan Berus
• Penapis HEPA (prapasang)
• Sponge Filter (pre-installed)

Figure 2.1: Included accessories for versatile cleaning.

3. Persediaan dan Pemasangan

Your VonHaus vacuum can be assembled in two configurations: upright stick vacuum or handheld vacuum.

3.1 Upright Stick Vacuum Assembly

1. Pasang Pemegang: Insert the extendable handle into the main vacuum unit until it clicks securely into place.
2. Pasangkan Kepala Berus Lantai: Connect the floor brush head to the main vacuum unit. Ensure it is firmly attached.
3. Sambungan Kuasa: Palamkan kord kuasa ke salur keluar elektrik yang sesuai.

Figure 3.1: The VonHaus 2-in-1 Stick Vacuum Cleaner in its two primary configurations.

3.2 Handheld Vacuum Assembly

1. Detach Handle and Floor Head: If assembled as an upright vacuum, press the release buttons to detach the extendable handle and the floor brush head from the main unit.
2. Lampirkan Aksesori: Select the desired accessory (crevice tool or brush attachment) and firmly attach it to the main vacuum unit.
3. Sambungan Kuasa: Palamkan kord kuasa ke salur keluar elektrik yang sesuai.

Figure 3.2: Handheld configuration for detailed cleaning tasks.

3.3 Visual Setup Guide

For a visual demonstration of the assembly process, please refer to the video below:

4. Arahan Operasi

Once assembled and plugged in, your vacuum is ready for use.

1. Hidupkan/Mati Kuasa: Locate the power switch on the main unit and slide it to the 'On' position to start vacuuming. Slide to 'Off' to stop.
2. Mod Tegak: Use the extendable handle and floor brush head for cleaning carpets, hard floors, and tiles. The lightweight design (approximately 0.01 ounces) allows for easy maneuverability.
3. Mod pegang tangan: For smaller messes, upholstery, car interiors, or hard-to-reach areas, use the main unit with the appropriate attachment.
4. Menggunakan Lampiran: The crevice tool is ideal for tight spaces and corners. The brush attachment is suitable for delicate surfaces and upholstery.

Figure 4.1: Effective cleaning of hard floors using the upright stick vacuum.

5. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat pembersih vakum anda.

5.1 Mengosongkan Dust Cup

Empty the dust cup regularly, ideally after each use, to maintain strong suction power.

1. Detach Dust Cup: Hold the main vacuum unit and press the dust cup release button. Gently pull the dust cup away from the main unit.
2. Remove Cyclone Separator: Over a waste bin, gently pull out the cyclone separator from the dust cup.
3. Kandungan Kosong: Tip the dust cup to empty all collected debris into the waste bin.
4. Pasang semula: Reinsert the cyclone separator, ensuring it aligns correctly. Reattach the dust cup to the main unit until it clicks securely.

Figure 5.1: The 1.3L dust tank and HEPA sponge filtration system.

5.2 Membersihkan Penapis HEPA

The washable HEPA filtration system helps trap small particles. Clean the filter periodically.

1. Keluarkan Penapis: After detaching the dust cup, carefully remove the HEPA filter.
2. Singkirkan Serpihan: Gently shake the filter over a waste bin to remove loose dirt and debris.
3. Penapis Basuh: Rinse the filter under running water until clean. Do not use detergents or hot water.
4. Keringkan Sepenuhnya: Allow the filter to air dry completely in a well-ventilated area before reinserting it. Ensure it is completely dry to prevent mold or damage.
5. Masukkan Semula Penapis: Place the dry filter back into the vacuum, ensuring it is securely sealed.

5.3 Visual Maintenance Guide

For a visual demonstration of emptying the dust cup and washing the filter, please refer to the video below:

6. Penyelesaian masalah

If you encounter issues with your vacuum, refer to the following common troubleshooting steps:

• Tiada Kuasa:
  • Pastikan kord kuasa dipasang dengan selamat ke soket yang berfungsi.
  • Check the power switch is in the 'On' position.
• Kehilangan Sedutan:
  • Kosongkan cawan habuk.
  • Clean or replace the HEPA and sponge filters.
  • Check for blockages in the nozzle, hose, or extension tube.
• Bunyi Luar Biasa:
  • Check for any foreign objects caught in the floor brush head or main unit.
  • Ensure all parts are correctly assembled and securely fastened.

If problems persist after attempting these steps, please contact VonHaus customer support.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official VonHaus webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

For additional assistance, you may contact VonHaus customer service directly.