Blum 38N otion 105-degree Compact 3/8-inch Overlay Screw-on Soft Close Hinge Instruction Manual

pengenalan

Thank you for choosing Blum 38N otion 105-degree Compact 3/8-inch Overlay Screw-on Soft Close Hinges. These hinges are designed to provide smooth, quiet, and reliable operation for your cabinet doors. This manual provides essential information for proper installation, operation, and maintenance to ensure the longevity and optimal performance of your hinges.

Maklumat Keselamatan

• Always wear appropriate personal protective equipment, such as safety glasses, when drilling or handling tools.
• Pastikan semua skru diikat dengan kemas untuk mengelakkan pintu daripada tertanggal.
• Jauhkan bahagian-bahagian kecil, seperti skru, daripada capaian kanak-kanak.
• Use only the recommended tools and hardware for installation.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Blum 38N otion 105-degree Compact 3/8-inch Overlay Screw-on Soft Close Hinges (Quantity as purchased, typically 10 per pack)
• #6 x 5/8" Wood Screws
• #10 x 3/4" Wood Screws

Image: Blum 38N otion hinges and accompanying screws.

Persediaan dan Pemasangan

Alat yang Diperlukan:

• Pensel
• Pita Pengukur atau Pembaris
• Drill with 35mm Forstner Bit (for hinge cup hole)
• Pemutar Skru Kepala Phillips

Pemeriksaan Prapemasangan:

• Bore Distance: These hinges require a 3mm bore distance, which is the measurement from the outermost edge of the cabinet door to the start of the hinge cup hole.
• Cup Depth: The hinge cup depth is 7/16" (11mm). Ensure your door material can accommodate this depth.
• Tindanan: These hinges are designed for a 3/8" overlay, meaning the door will protrude 1/8" beyond the cabinet frame when closed.

Langkah Pemasangan:

1. Lokasi Engsel Mark: On the inside of your cabinet door, mark the positions for the hinge cups. Typically, hinges are placed 2-3 inches from the top and bottom edges of the door. Ensure the 3mm bore distance is maintained from the door edge to the start of the 35mm hole.
2. Drill Hinge Cup Holes: Using a drill with a 35mm Forstner bit, carefully drill the hinge cup holes to a depth of 7/16" (11mm) at the marked locations. Ensure the holes are clean and free of debris.


Image: Hinge cup installed in a cabinet door.

3. Pasang Engsel pada Pintu: Insert the hinge cup into the drilled hole. Secure the hinge to the door using the provided #6 x 5/8" wood screws in the pre-drilled holes on the hinge arm.
4. Attach Door to Cabinet: Position the cabinet door onto the cabinet frame, aligning the hinge mounting plates with the desired location. Secure the hinge mounting plates to the cabinet frame using the provided #10 x 3/4" wood screws.
5. Laraskan Penjajaran Pintu: These hinges offer adjustment screws for fine-tuning door alignment. Adjust as necessary to achieve proper door closure and spacing.

Arahan Operasi

Soft-Close Function (BLUMOTION):

The integrated BLUMOTION mechanism ensures that your cabinet doors close softly and silently. Simply push the door gently, and the hinge will engage the soft-close feature, preventing slamming.

Deactivation Switch:

For smaller or lighter cabinet doors, the soft-close action might be too strong. These hinges include a deactivation switch located on the hinge cup. To deactivate the soft-close function, slide the switch to the 'off' position. This can be useful for doors that are very light and might not close fully with the soft-close engaged, or if you prefer a traditional closing action.

Penyelenggaraan

• Pembersihan: Clean the hinges with a soft, damp kain. Elakkan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan.
• Pemeriksaan Berkala: Periodically check all mounting screws for tightness. Loose screws can affect hinge performance and door alignment.
• Pelinciran: The BLUMOTION mechanism is maintenance-free and does not require lubrication.

Menyelesaikan masalah

• Pintu Tidak Ditutup Lembut:
  • Check if the deactivation switch is in the 'on' position.
  • Ensure the door is not too heavy for the number of hinges used.
• Door Not Closing Completely:
  • Check for obstructions within the cabinet opening.
  • Verify that the hinges are properly aligned and adjusted.
  • If the door is very light, try deactivating the soft-close mechanism.
• salah jajaran pintu:
  • Use the adjustment screws on the hinge to fine-tune the door's position horizontally, vertically, and for depth.
  • Pastikan semua skru pelekap ketat.

Spesifikasi

Waranti dan Sokongan

Blum products are manufactured to high-quality standards and are typically backed by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the official Blum webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

For further assistance, please visit the official Blum webtapak atau hubungi sokongan pelanggan mereka.