SENA 20S-EVO-01D Motorcycle Bluetooth Headset Communication System

1. Produk Lebihview

The Sena 20S-EVO-01D is a state-of-the-art Bluetooth communication system designed for motorcycle riders. It offers a robust and stable intercom connection, allowing riders to communicate with each other, listen to music, make phone calls, and receive GPS navigation instructions. This model features an updated fixed shark fin antenna for enhanced performance and reliability.

Ciri-ciri Utama:

• Next-generation design with improved intercom functionality and stability.
• Sleek new fixed shark fin antenna design for enhanced intercom stability.
• Robust general performance updates for a superior riding experience.

2. Persediaan dan Pemasangan

Proper installation ensures optimal performance and comfort. Follow these steps to set up your Sena 20S-EVO-01D.

2.1. Kandungan Pakej

Before beginning, verify all components are present in your package:

Image: All components of the Sena 20S-EVO-01D system, including the main module, speakers, and various microphone options.

• Sena 20S-EVO-01D Main Module
• Speaker Set (40 mm driver unit)
• Mikrofon Boom
• Mikrofon Berwayar
• Pemasangan Clamp Kit
• Kuasa USB & Kabel Data
• Speaker Pads, Hook and Loop Fasteners, and other accessories

2.2. Mengecas Peranti

Fully charge the device before first use. The LED indicator will turn red during charging and blue when fully charged.

1. Connect the USB Power & Data Cable to the charging port on the main module.
2. Plug the other end into a USB wall charger or computer USB port.
3. Pengecasan biasanya mengambil masa kira-kira 2.5 jam untuk cas penuh.

2.3. Mounting the Headset to Your Helmet

The 20S-EVO-01D can be mounted using either the clamp kit or the adhesive mount.

Image: The Sena 20S-EVO-01D communication system securely attached to the left side of a white motorcycle helmet, demonstrating its low-profile integrasi.

1. Pilih Lokasi Pemasangan: Select a flat surface on the left side of your helmet, near the bottom edge.
2. Pasang Clamp Kit: Longgarkan skru pada clamp kit and slide it between the helmet shell and the inner padding. Tighten the screws securely.
3. Pasang Pembesar Suara: Place the speakers inside the helmet's ear pockets. Ensure they are centered with your ears for optimal audio. Use the provided hook and loop fasteners.
4. Pasang Mikrofon: For full-face helmets, use the wired microphone and attach it to the inside of the chin bar. For open-face or modular helmets, use the boom microphone and position it approximately 1-2 cm from your mouth.
5. Sambungkan Kabel: Plug the speaker and microphone cables into the corresponding ports on the main module.
6. Attach Main Module: Slide the main module onto the mounted clamp. Ensure it clicks securely into place.

3. Mengendalikan Peranti

Familiarize yourself with the controls and functions of your Sena 20S-EVO-01D.

3.1. Kawalan Asas

• Hidupkan/Mati Kuasa: Press and hold the Phone Button and the Jog Dial for 1 second.
• Pelarasan Kelantangan: Rotate the Jog Dial clockwise to increase volume, counter-clockwise to decrease.
• Perintah Suara: Tap the Phone Button to activate voice commands.

3.2. Berpasangan Bluetooth

Pair your 20S-EVO-01D with your mobile phone or other Bluetooth devices.

1. Gandingan Telefon: In power-off state, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately. Select "Sena 20S EVO" from your phone's Bluetooth device list.
2. Gandingan Telefon Bimbit Kedua: In power-off state, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue alternately. Select "Sena 20S EVO" from your second phone's Bluetooth device list.

3.3. Komunikasi Interkom

The 20S-EVO-01D supports up to 8-way intercom communication.

1. Pairing with another 20S EVO: Press and hold the Jog Dial on both units for 5 seconds until the LED flashes red. Tap the Jog Dial on either unit to complete pairing.
2. Memulakan Interkom: Tap the Jog Dial once to start intercom with the first paired friend. Tap twice for the second, and so on.
3. Interkom tamat: Tap the Jog Dial once to end intercom.

3.4. Music and Phone Calls

• Main/Jeda Muzik: Tekan Dail Jog selama 1 saat.
• Trek Seterusnya / Sebelumnya: Rotate the Jog Dial while pressing it for 1 second.
• Jawab/Tamatkan Panggilan: Ketik Butang Telefon.
• Tolak Panggilan: Tekan dan tahan Butang Telefon selama 2 saat.

4. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your Sena 20S-EVO-01D.

4.1. Pembersihan

• Wipe the main module with a soft, damp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
• Pastikan semua port bebas daripada habuk dan serpihan.

4.2. Penjagaan Bateri

• Elakkan menyahcas sepenuhnya bateri dengan kerap.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
• Charge the device at least once every 3-6 months to prevent deep discharge.

4.3. Kemas Kini Perisian Tegar

Sena regularly releases firmware updates to improve performance and add new features. Visit the Sena website to download the Sena Device Manager and update your device.

5. Penyelesaian masalah

This section addresses common issues you might encounter with your 20S-EVO-01D.

6. Spesifikasi

Detailed technical specifications for the Sena 20S-EVO-01D.

7. Waranti dan Sokongan

For warranty information, technical support, and frequently asked questions, please visit the official Sena website. You can also find updated manuals and firmware downloads there.

Sena Technologies, Inc.
152 Teknologi Dr.
Irvine, CA 92618 Amerika Syarikat

For the most current support resources, please visit: www.sena.com