pengenalan
Thank you for choosing the Infinity KAPPA-1000W KAPPA 10 Inch Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. Please read this manual thoroughly before attempting to install or use the product to ensure optimal performance and safety.
The KAPPA-1000W is designed to deliver powerful and accurate bass, enhancing your car audio experience. It features Selectable Smart Impedance (SSI), allowing for flexible system configuration.
Maklumat Keselamatan
- Sentiasa putuskan sambungan terminal negatif bateri kenderaan sebelum memulakan sebarang pemasangan.
- Pastikan semua pendawaian mempunyai penebat yang betul untuk mengelakkan litar pintas.
- Do not expose the subwoofer to excessive moisture or extreme temperatures.
- Pasang subwufer dengan selamat untuk mengelakkan pergerakan semasa pengendalian kenderaan.
- Rujuk pemasang audio kereta profesional jika anda tidak pasti tentang mana-mana bahagian proses pemasangan.
- Produk ini mengandungi bahan kimia yang diketahui oleh Negeri California untuk menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan lain.
Persediaan dan Pemasangan
Proper installation is crucial for the performance and longevity of your subwoofer.
Choosing an Enclosure
The Infinity KAPPA-1000W subwoofer can be installed in various enclosure types, including sealed, ported, or bandpass designs. Refer to recommended enclosure volumes provided by Infinity for optimal performance. The subwoofer cones incorporate glass-fibers for exceptional accuracy and detail, which perform best in a properly sized enclosure.
Memasang Subwoofer
Securely mount the subwoofer into the chosen enclosure. Ensure there is adequate clearance for the cone excursion and proper ventilation for the voice coil.
Imej: Bersudut view of the Infinity KAPPA-1000W 10 Inch Subwoofer, showcasing its design and robust construction.
Wiring and Selectable Smart Impedance (SSI)
The KAPPA-1000W features Selectable Smart Impedance (SSI), a proprietary HARMAN technology that allows you to choose between 2-ohm and 4-ohm impedance settings by simply flipping a switch on the subwoofer's terminal. This flexibility enables you to optimize your system's impedance to match your ampkeupayaan liifier.
Imej: Sisi view of the Infinity KAPPA-1000W subwoofer, highlighting the SSI (Selectable Smart Impedance) switch and wiring terminals. The switch allows selection between 2-ohm and 4-ohm impedance.
The terminals on the Kappa subwoofers accommodate up to 8-gauge wire (8.37mm² cross-section), ensuring low-resistance and low-loss power transfer from your amplifier to the woofer, even over long wire runs.
- Before connecting, select the desired impedance (2-ohm or 4-ohm) using the SSI switch.
- Connect the positive (+) terminal of the subwoofer to the positive (+) output of your amplebih hidup.
- Connect the negative (-) terminal of the subwoofer to the negative (-) output of your amplebih hidup.
- Ensure all connections are secure and free from frayed wires that could cause short circuits.
Mengendalikan Subwufer
Once installed and wired, the subwoofer operates as part of your car audio system.
- Pemilihan Impedans: The SSI feature allows you to change the subwoofer's impedance to match your amplifier's optimal load. This should be set before applying power.
- AmpTetapan penguat: Laraskan anda amplifier's gain, crossover frequency, and phase settings according to your system's requirements and listening preferences. Start with low gain and gradually increase it.
- Tempoh Pecah Masuk: Allow a break-in period of several hours of normal listening before operating the subwoofer at its maximum potential. This allows the suspension components to loosen and perform optimally.
Penyelenggaraan
The Infinity KAPPA-1000W subwoofer requires minimal maintenance.
- Pembersihan: Gunakan kain lembut dan kering untuk mengelap kon dan sekeliling subwoofer. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
- Pemeriksaan: Periodically check all wiring connections to ensure they remain secure. Inspect the subwoofer for any signs of damage to the cone, surround, or spider.
- Pengudaraan: Ensure that the subwoofer's voice coil cooling system (two-sided, ducted airflow design) is not obstructed. Proper airflow increases power handling and improves reliability.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada bunyi daripada subwufer |
|
|
| Bass herot atau tidak jelas |
|
|
| Subwoofer terlalu panas |
|
|
Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nama Model | INFINITY KAPPA-1000W |
| Jenis Pembesar Suara | Subwufer |
| Diameter Subwoofer | 10 Inci |
| Pengendalian Kuasa Puncak | 1800 Watt |
| Pengendalian Kuasa RMS | 450 Watt |
| Respons Kekerapan | 30Hz - 200Hz |
| Impedans | Selectable Smart Impedance (SSI) - 2-ohm or 4-ohm |
| Bahan Kon | Glass-fibers |
| Voice Coil Cooling | Two-sided, ducted airflow design |
| Dimensi Produk (LxWxH) | 2"D x 2"W x 2"H (Note: These dimensions seem to be placeholder/incorrect from source data, typical subwoofer dimensions are larger) |
| Berat Barang | 11 paun |
| Komponen yang Disertakan | Subwufer |
Waranti dan Sokongan
The Infinity KAPPA-1000W Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Infinity customer service.
- Sokongan dalam talian: Visit the official Infinity website for FAQs, support documents, and contact information.
- Perkhidmatan Pelanggan: Refer to your product packaging or the Infinity website for customer service phone numbers and email contacts.
