Intermec PC43T Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Intermec PC43T Thermal Transfer/Direct Thermal Desktop Printer. It covers setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the printer and retain it for future reference.

The Intermec PC43T is a versatile 4-inch desktop printer designed for various labeling applications, featuring both thermal transfer and direct thermal printing capabilities, a 203 DPI print resolution, an LCD display for easy navigation, and multiple USB connectivity options.

2. Maklumat Keselamatan

Always observe the following safety precautions to prevent injury and damage to the printer:

• Sumber Kuasa: Use only the power adapter supplied with the printer. Ensure the power outlet is properly grounded.
• Pengudaraan: Do not block ventilation openings. Ensure adequate airflow around the printer to prevent overheating.
• Persekitaran: Operate the printer in a clean, dry environment, away from direct sunlight, excessive heat, or moisture.
• Pengendalian: Avoid dropping or subjecting the printer to strong impacts.
• Penyelenggaraan: Disconnect the power cord before performing any maintenance or cleaning. Do not attempt to service the printer yourself; refer to qualified service personnel.

3. Komponen Pencetak

Familiarize yourself with the main components of your Intermec PC43T printer:

This image displays the Intermec PC43T desktop label printer. The printer is dark gray with an integrated LCD display on top, showing menu options like 'Programs', 'Setup', 'Tools', and 'Wizards'. A label with a barcode and text 'EDI-DOC' is shown exiting the front of the printer. The printer features a blue button on the right side and several control buttons near the LCD screen.

• Paparan LCD: Provides menu navigation and status information.
• Butang Kawalan: Used to navigate menus and confirm selections on the LCD display.
• Media Exit Slot: Where printed labels or receipts exit the printer.
• Media Cover Latch: (Blue button on the right side) Releases the top cover to access media and ribbon compartments.
• Pelabuhan Kuasa: Connects the printer to the power adapter.
• Port USB: Includes USB 2.0 and two USB Host ports for connectivity.

4. Persediaan Awal

4.1. Membongkar

1. Tanggalkan pencetak dan semua aksesori daripada pembungkusan dengan berhati-hati.
2. Sahkan bahawa semua komponen yang disenaraikan dalam slip pembungkusan ada.
3. Retain the packaging for future transportation or storage.

4.2. Kuasa Penyambung

1. Sambungkan kord kuasa kepada penyesuai kuasa.
2. Plug the power adapter into the printer's power port.
3. Palamkan kord kuasa ke salur keluar elektrik yang dibumikan.

4.3. Menyambung USB

1. Connect one end of the USB cable to the USB 2.0 port on the printer.
2. Sambungkan hujung kabel USB yang lain ke port USB yang tersedia pada komputer anda.
3. The printer also features two USB Host ports for connecting peripherals.

4.4. Memuatkan Media

The PC43T supports both thermal transfer (requires ribbon) and direct thermal (no ribbon) media. Refer to the specific media loading instructions provided with your media type.

1. Press the blue media cover latch to open the printer's top cover.
2. Place the roll of labels onto the media supply spindle, ensuring the labels feed correctly.
3. Thread the media through the guides and under the print head.
4. If using thermal transfer media, install the ribbon according to the instructions provided with the ribbon.
5. Tutup penutup atas sehingga ia terkunci dengan kukuh.

5. Arahan Operasi

5.1. Menghidupkan/Mematikan

• Untuk Menghidupkan: Press the power button located on the printer. The LCD display will illuminate.
• Untuk Mematikan: Press and hold the power button until the printer shuts down.

5.2. Menggunakan Paparan LCD

The LCD display provides access to printer settings and status. Use the control buttons adjacent to the display to navigate:

• Anak panah atas/bawah: Tatal melalui pilihan menu.
• Butang Masukkan: Pilih pilihan atau sahkan tetapan.
• Butang Belakang: Kembali ke menu sebelumnya.

Pilihan menu biasa termasuk:

• Program: Access pre-loaded printing applications.
• Persediaan: Configure printer settings such as media type, print darkness, and network settings.
• Alatan: Perform calibration, test prints, or view printer information.
• Wizards: Guided setup processes for specific tasks.

5.3. Driver Installation and Printing

Before printing, install the appropriate printer drivers on your computer. Drivers are typically available from the Intermec support website. Once installed, you can print labels from compatible software applications.

1. Pastikan pencetak dihidupkan dan disambungkan ke komputer anda.
2. Buka perisian atau aplikasi reka bentuk label anda.
3. Select the Intermec PC43T as your printer.
4. Configure print settings (e.g., label size, orientation) as needed.
5. Mulakan kerja cetak.

6. Penyelenggaraan

Regular maintenance ensures optimal printer performance and extends its lifespan.

6.1. Membersihkan Kepala Cetak

A dirty print head can cause poor print quality. Clean it regularly, especially after changing media or ribbon.

1. Matikan pencetak dan cabut kord kuasa.
2. Buka muka depan media.
3. Gently wipe the print head surface with a lint-free cloth moistened with isopropyl alcohol.
4. Benarkan kepala cetakan kering sepenuhnya sebelum menutup penutup dan menyambung semula kuasa.

6.2. Replacing Supplies

Replace labels and thermal transfer ribbons as they run out. Always use Intermec-approved supplies for best results.

• Label: Follow the media loading instructions in Section 4.4.
• Ribbon (Thermal Transfer): Follow the specific instructions provided with your ribbon. Ensure the ribbon is correctly tensioned.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your PC43T printer.

8. Spesifikasi

Key technical specifications for the Intermec PC43T printer (Model: PC43TB00100201):

• Teknologi Percetakan: Pemindahan Terma / Terma Terus
• Resolusi Cetakan: 203 DPI
• Saiz Media Maksimum: 4 inci
• paparan: Paparan LCD
• Ketersambungan: USB 2.0, 2 USB Host Ports
• Ciri Khas: Tear-Off function, Real Time Clock
• Termasuk: Latin fonts, US power cord
• Berat Barang: Lebih kurang 1 paun
• warna: Hitam

9. Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including updated drivers and firmware, can be found on the manufacturer's support portal.

If you require service or have questions not covered in this manual, please contact your authorized Intermec dealer or technical support.