Flexispot EB2B Electric Height-Adjustable Desk Frame User Manual

1. Pengenalan

Thank you for choosing the Flexispot EB2B Electric Height-Adjustable Desk Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk frame. Please read this manual thoroughly before installation and keep it for future reference.

Image: The Flexispot EB2B desk frame supporting a complete desk setup, highlighting its dual-motor design.

2. Maklumat Keselamatan

Untuk memastikan operasi yang selamat dan mengelakkan kerosakan, sila patuhi langkah berjaga-jaga keselamatan berikut:

• Pastikan semua komponen diikat dengan selamat sebelum digunakan.
• Jangan melebihi kapasiti berat maksimum 100 kg (220 lbs).
• Jauhkan kanak-kanak dan haiwan peliharaan daripada meja semasa operasi untuk mengelakkan kecederaan akibat bahagian yang bergerak.
• Ensure there are no obstructions in the desk's path when adjusting height. The anti-collision system is designed to prevent damage, but manual vigilance is always recommended.
• Do not disassemble or modify the desk frame or its electrical components. Contact qualified personnel for repairs.
• Putuskan sambungan kuasa sebelum membersihkan atau melakukan sebarang penyelenggaraan.

Image: Visual representation of the anti-collision system, showing the desk rebounding upon detecting an obstruction.

3. Kandungan Pakej

Sila sahkan bahawa semua bahagian hadir sebelum memulakan pemasangan:

• Kaki Meja (2)
• Kaki (2)
• palang (1)
• Kurung Samping (2)
• Kotak Kawalan (1)
• Telefon Bimbit/Panel Kawalan (1)
• Penyesuai Kuasa (1)
• Kord Kuasa (1)
• Cable Management Clips (4)
• Assembly Hardware (screws, Allen keys, etc.)

Image: All main components of the Flexispot EB2B desk frame, including the dual legs, crossbar, and control panel.

4. Persediaan dan Pemasangan

Follow these steps to assemble your Flexispot EB2B desk frame. It is recommended to have two people for assembly.

1. Sediakan Kawasan: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desk frame and your floor.
2. Attach Feet to Legs: Securely attach the feet to the bottom of each desk leg using the provided screws.
3. Pasang palang: Connect the two desk legs to the adjustable crossbar. Ensure the crossbar is extended to the desired width to accommodate your tabletop (Min: 110cm, Max: 180cm).
4. Install Side Brackets: Attach the side brackets to the top of the desk legs, which will support your tabletop.
5. Pasang Kotak Kawalan: Secure the control box to the designated area under the crossbar.
6. Sambungkan Kabel: Connect the motor cables from each leg to the control box. Connect the handset cable to the control box. Finally, connect the power adapter to the control box and the power cord to the adapter.
7. Lampirkan Tabletop: Carefully place your tabletop (not included) onto the assembled frame. Ensure it is centered and aligned. Secure the tabletop to the frame using appropriate screws (ensure screws are not too long to penetrate the tabletop surface). The frame is compatible with tabletops from 110 cm to 180 cm wide and 50 cm to 80 cm deep.
8. Pengurusan Kabel: Use the provided cable management clips to organize and secure all cables, preventing them from dangling or getting caught.

Image: A diagram illustrating the adaptable desktop sizes (width and depth) that the Flexispot EB2B desk frame can accommodate.

5. Arahan Operasi

The Flexispot EB2B features a user-friendly control panel for height adjustment and memory functions.

5.1. Pelarasan Ketinggian Asas

• Naikkan Meja: Tekan dan tahan butang UP (^) button to raise the desk to your desired height.
• Meja Bawah: Tekan dan tahan butang DOWN (v) button to lower the desk to your desired height.
• The LED display will show the current height in centimeters. The desk operates smoothly and quietly, with a noise level below 50 dB and a lifting speed of 3.2 cm/sec.

5.2. Pratetap Memori

Panel kawalan membolehkan anda menyimpan sehingga empat tetapan ketinggian pilihan.

1. Laraskan meja ke ketinggian yang anda inginkan menggunakan butang ATAS/BAWAH.
2. Tekan ke 'M' button (or 'S' depending on the model) followed by the desired preset number (1, 2, 3, atau 4). The display will show 'S-' then the number, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding preset number (1, 2, 3, atau 4Meja akan bergerak secara automatik ke kedudukan yang disimpan.

5.3. Sedentary Reminder System

The advanced control panel includes a sedentary reminder system to encourage healthy work habits. Consult your specific control panel's instructions for activating and setting reminder intervals.

5.4. Sistem Anti-Perlanggaran

The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. You can adjust the sensitivity of this system (refer to the detailed control panel manual for specific steps).

Imej: A terperinci view of the control panel, showing the LED display, up/down buttons, and four memory preset buttons.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your desk frame.

• Pembersihan: Lap rangka meja dengan kain lembut,amp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar. Pastikan meja dicabut plag sebelum dibersihkan.
• Pemeriksaan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Pemeriksaan Kabel: Pastikan semua kabel disambungkan dengan selamat dan bebas daripada kerosakan.
• Pelinciran: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by Flexispot support.

7. Penyelesaian masalah

If you encounter issues with your Flexispot EB2B desk frame, refer to the following common problems and solutions:

7.1. Tetapkan Semula Prosedur

If the desk is not functioning correctly, a reset may resolve the issue:

1. Tekan dan tahan butang DOWN (v) button until the desk reaches its lowest position and slightly rebounds. Continue holding for approximately 5-10 seconds until the display shows 'RST' or 'RESET'.
2. Release the button. The desk will then move slightly up and down to calibrate. Once the display shows the lowest height (e.g., 71.0), the reset is complete.

8. Spesifikasi

Image: The Flexispot EB2B frame demonstrating its large height adjustment range (70-119 cm) and anti-collision feature.

9. Waranti dan Sokongan

Flexispot stands behind the quality of its products.

• Waranti Bingkai: The desk frame is covered by a Waranti 5 tahun.
• Motor and Controller Warranty: The motors and controllers are covered by a Waranti 3 tahun.

For warranty claims, technical support, or any questions not covered in this manual, please contact Flexispot customer service through their official website or your point of purchase. Please have your model number (EB2B) and purchase information ready.

Image: Visual representation of the warranty terms: 5 years for the desk frame and 3 years for controllers and motors.