CHACON Wireless Indoor/Outdoor Thermometer

1. Produk Lebihview

The CHACON Wireless Indoor/Outdoor Thermometer Model 54414 provides real-time temperature readings for both indoor and outdoor environments. Its sleek design integrates an internal clock with 12 or 24-hour display options. The system includes a main display unit and a wireless outdoor sensor for convenient temperature monitoring.

Ciri-ciri Utama:

• Real-time indoor and outdoor temperature display.
• Integrated 12/24 hour clock.
• Indoor temperature range: -10 °C to +50 °C.
• Outdoor temperature range: -30 °C to +70 °C.
• Temperature refresh rate: 60 seconds.
• Wireless outdoor sensor included.

Image 1.1: Main display unit and wireless outdoor sensor with indicated features.

2. Persediaan dan Pemasangan

Follow these steps to set up your CHACON Wireless Indoor/Outdoor Thermometer.

2.1 Pemasangan Bateri

1. Untuk Sensor Luar Tanpa Wayar: Carefully unscrew the back cover of the sensor using a small screwdriver. Insert 2 AAA batteries, ensuring correct polarity (+/-). Replace the cover and secure the screw.
2. For the Main Display Unit: Gently unclip the battery compartment cover on the back of the main unit. Insert 2 AAA batteries, observing correct polarity. Replace the battery compartment cover.

Imej 2.1: Belakang view of the main unit, showing the battery compartment and control buttons.

2.2 Penyegerakan Sensor

After installing batteries in both units, the main display unit will automatically attempt to synchronize with the outdoor sensor. This process typically takes approximately 1 minute. Once synchronized, the outdoor temperature will appear on the main display.

• If synchronization does not occur automatically, press and hold the 'UP' button on the main unit for a few seconds to initiate manual synchronization.

2.3 Penempatan

• Unit Paparan Utama: Place the main unit indoors in a location where you can easily view the display. Avoid direct sunlight or heat sources that could affect indoor temperature readings.
• Sensor Luaran Tanpa Wayar: Mount the outdoor sensor in a shaded area, protected from direct rain and sunlight, to ensure accurate temperature readings. Ensure it is within the effective transmission range of the main unit (typically up to 20 meters, depending on environmental factors and obstacles).

3. Arahan Operasi

The main display unit shows indoor temperature, outdoor temperature, and the current time.

3.1 Menetapkan Masa

Refer to the buttons on the back of the main unit (refer to Image 2.1).

1. Press the 'TIME' button to enter time setting mode.
2. Gunakan butang 'ATAS' dan 'BAWAH' untuk melaraskan jam dan minit.
3. Press 'TIME' again to confirm each setting and move to the next.
4. To switch between 12-hour and 24-hour format, press the 'TIME' button while the time is displayed normally (not in setting mode).

3.2 Menukar Unit Suhu (°C/°F)

Press the '°C/°F' button on the back of the main unit to toggle between Celsius and Fahrenheit temperature displays.

3.3 Viewing Maximum/Minimum Temperatures

Press the 'MAX/MIN' button on the back of the main unit to view the recorded maximum and minimum indoor and outdoor temperatures since the last reset. Press again to cycle through maximum, minimum, and current temperatures. To reset the recorded maximum/minimum values, press and hold the 'MAX/MIN' button while the max/min values are displayed.

4. Penyelenggaraan

4.1 Pembersihan

Wipe the thermometer's surfaces with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan paparan atauasing.

4.2 Penggantian Bateri

Replace batteries in both the main unit and the outdoor sensor when the display becomes dim or erratic. Always replace all batteries in a unit at the same time with new AAA batteries. Dispose of used batteries responsibly according to local regulations.

5. Penyelesaian masalah

• Tiada paparan pada unit utama: Periksa sama ada bateri dipasang dengan betul dan tidak habis. Gantikan bateri jika perlu.
• No outdoor temperature reading:
  • Ensure the outdoor sensor batteries are correctly installed and not depleted.
  • Verify the outdoor sensor is within range of the main unit and there are no significant obstructions (e.g., thick walls, metal objects) causing interference.
  • Try re-synchronizing the sensor by pressing and holding the 'UP' button on the main unit.
  • Avoid placing the sensor near large metal objects or electrical appliances that may cause radio interference.
• Bacaan suhu tidak tepat:
  • Ensure both the main unit and the outdoor sensor are not exposed to direct sunlight, heat sources, or extreme drafts.
  • For outdoor sensor, ensure it is protected from rain and direct weather elements.

6. Spesifikasi

7. Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official CHACON webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.