1. Pengenalan
The DAB E.SYBOX is an integrated electronic water booster system designed for domestic and residential applications. This system provides constant water pressure while optimizing energy consumption. It is suitable for use with potable water in domestic plants, for gardening, and irrigation. The E.SYBOX can also be used to create groups of up to four pumps.
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your E.SYBOX system. Please read it thoroughly before installation and keep it for future reference.
2. Maklumat Keselamatan
WARNING: Before performing any operation on the pump, disconnect it from the main power supply.
- Pastikan bekalan kuasa voltage matches the specifications of the E.SYBOX (230V).
- Pemasangan dan penyelenggaraan hendaklah hanya dilakukan oleh kakitangan yang berkelayakan.
- Do not operate the pump with flammable or explosive liquids.
- Lindungi unit daripada suhu beku.
- Pastikan pengudaraan yang betul di sekeliling unit untuk mengelakkan terlalu panas.
- Unit mesti dibumikan dengan betul.
3. Kandungan Pakej
Sahkan bahawa semua komponen ada dan tidak rosak semasa membongkar:
- DAB E.SYBOX Water Booster System Unit
- Kord Kuasa
- Connection Pieces (e.g., 1" plastic unions)
- Manual Pengguna (dokumen ini)
4. Persediaan dan Pemasangan
The E.SYBOX is designed for straightforward installation and requires no additional components for basic setup. It can be installed either vertically or horizontally.
4.1. Memilih Lokasi Pemasangan
Pilih lokasi yang:
- Protected from direct sunlight and extreme temperatures.
- In a closed space without a high level of air exchange, as the unit is water-cooled and quiet.
- Boleh diakses untuk penyelenggaraan.
- Near the water source and the distribution system.
4.2. Pemasangan Fizikal
- Kedudukan Unit: Place the E.SYBOX on a stable, level surface. The anti-vibration feet help reduce noise. The unit can be positioned vertically or horizontally.
- Menyambungkan Talian Air: Connect the inlet pipe from your water source to the suction port and the outlet pipe to your distribution system. Use the provided 1" plastic unions for secure connections. Ensure all connections are watertight.
- Sambungan Elektrik: Connect the power cord to a grounded 230V AC outlet. Ensure the power supply is stable and protected from surges.
- Menyapu Pam (jika perlu): For initial startup or after maintenance, ensure the pump is filled with water before operation to prevent dry running. Refer to the display for priming instructions.
Rajah 1: Depan view of the DAB E.SYBOX unit, showing the display and general form factor.
Rajah 2: Belakang view of the E.SYBOX, highlighting the water inlet and outlet connections.
5. Arahan Operasi
The E.SYBOX features an adjustable, high-resolution LCD display for easy operation and monitoring.
5.1. Hidupkan Kuasa Awal
- Once connected to power, the LCD display will illuminate.
- Follow the on-screen prompts for initial setup, which may include language selection and basic pressure settings.
5.2. Setting Desired Pressure
The E.SYBOX allows you to set your desired water pressure. The system will then maintain this constant pressure by adjusting pump speed.
- Navigate through the LCD menu using the control buttons adjacent to the display.
- Locate the "Pressure Setting" option.
- Adjust the pressure value (e.g., in PSI or Bar) to your preference. The system can deliver up to 210 ft (approx. 90 PSI) of head.
- Confirm your selection. The system will automatically adjust to maintain this pressure.
Figure 3: E.SYBOX display showing operational parameters such as power consumption (360W), pressure (3 Bar / 43 PSI), and flow rate (3.2 GPM / 12 l/min).
5.3. Prestasi Pemantauan
The LCD display provides real-time statistics:
- Tekanan: Current system pressure.
- Kadar Aliran: Instantaneous water flow.
- Penggunaan Kuasa: Energy consumption of the unit.
- Penggera/Amaran: Notifications for any operational issues.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your E.SYBOX system.
6.1. Pemeriksaan Rutin
- Pemeriksaan Visual: Periodically check for any leaks, unusual noises, or visible damage.
- Air Exchange: Ensure the area around the unit is not obstructed to allow for proper air circulation for the water-cooled motor.
6.2. Pembersihan Sensor
Over time, sediment may accumulate and affect the flow sensors. The E.SYBOX comes with a tool for cleaning these sensors.
- Putuskan Kuasa: Always disconnect the unit from the power supply before any maintenance.
- Cari Penderia: Refer to the detailed diagram in the full technical manual (if available) to locate the flow sensors.
- Bersih: Use the provided tool to carefully clean any accumulated sediment from the sensors.
- Sambung semula: Reassemble any removed parts and reconnect power.
6.3. Musim sejuk
If the unit is installed in an area subject to freezing temperatures, it must be drained to prevent damage.
- Putuskan kuasa.
- Drain all water from the pump and associated piping.
- Store in a frost-free environment if possible, or ensure complete drainage.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your E.SYBOX system.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No water flow / Pump not starting | No power; Air in pump; Clogged inlet; Low water level in source. | Check power connection; Prime the pump; Clean inlet filter; Ensure adequate water supply. |
| Tekanan rendah | Incorrect pressure setting; Partially clogged filter/pipes; Air in system. | Adjust pressure setting on LCD; Inspect and clean filters/pipes; Bleed air from system. |
| Pump runs continuously / Frequent on/off cycling | Leak in system; Small continuous flow (e.g., dripping faucet); Faulty sensor. | Check for leaks in plumbing; Address small continuous flows; Contact support if sensor is suspected. |
| Bunyi atau getaran yang luar biasa | Air in pump; Loose connections; Foreign object in pump. | Prime the pump; Check and tighten all connections; Disconnect power and inspect pump impeller (if safe and accessible). |
| LCD display error message | Kesalahan sistem tertentu. | Note the error code and consult the full technical manual or contact customer support. |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | 60161182 |
| Voltage | 230 Volt |
| Sumber Kuasa | AC/DC |
| Kadar Aliran Maksimum | 32 Gelen Seminit (GPM) |
| Ketinggian Pengangkatan Maksimum (Kepala) | 210 Kaki |
| Julat Suhu Cecair | +32 to +95°F (domestic use), +32 to +102°F (other uses) |
| Kedalaman Sedutan Maksimum | 26 Kaki |
| Berat Barang | 57 paun |
| Dimensi Produk (L x W x H) | 14.25 x 10.35 x 22.2 inci |
| bahan | ABS |
| Integrated Expansion Tank | 0.5 gelen |
9. Waranti dan Sokongan
9.1. Maklumat Waranti
DAB provides a limited warranty for the E.SYBOX 230V Water Booster System against defects in materials and workmanship under normal use and service. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, refer to the warranty card included with your product or visit the official DAB webtapak.
9.2. Sokongan Pelanggan
If you require technical assistance, have questions about installation, operation, or maintenance, or need to report a problem, please contact DAB customer support.
- Sokongan dalam talian: Visit the official DAB Pumps website for FAQs, technical documents, and contact forms.
- Sokongan Telefon: Refer to the contact information provided on the DAB website or your product packaging for regional support numbers.
- When contacting support, please have your product model (60161182) and serial number (if applicable) ready.
