pengenalan
This manual provides instructions for the safe and efficient use of your Fosmon 24-Hour Mechanical Dual Outlet Timer, Model C-10681. This device is designed to automatically turn electrical appliances on and off at programmed times, offering convenience and potential energy savings. Please read these instructions thoroughly before operation and retain them for future reference.
Image: The Fosmon 24-Hour Mechanical Dual Outlet Timer, showing its compact design and rotating dial.
Maklumat Keselamatan
Sila patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada peranti:
- For indoor use only. Do not expose to water or moisture.
- Do not exceed electrical ratings: 125VAC, 15A, 1875W, 10A Tungsten, 3/4HP.
- Ensure the timer is securely plugged into a grounded 3-prong outlet.
- Unplug the timer from the wall outlet before cleaning.
- Do not disassemble or attempt to repair the timer. Contact customer support for assistance.
- Jauhkan daripada kanak-kanak.
Imej: Belakang view of the Fosmon timer showing the 3-prong plug and ETL certification label, indicating safety compliance.
Ciri-ciri Produk
- Boleh Diprogram 24 Jam: Set up to 24 ON/OFF cycles per day.
- 30-Minute Intervals: Program in increments as small as 30 minutes.
- Dwi Cawangan: Power two devices simultaneously.
- Suis Override Manual: Temporarily bypass programmed settings.
- Grounded 3-Prong Design: Memastikan operasi selamat.
- Keserasian Luas: Sesuai untuk lamps, fans, small appliances, reptile lights, grow lights, and holiday decorations.
Image: Close-up of the timer's dial, highlighting its fully programmable nature with 30-minute increments.
Imej: Sisi view of the timer showing two grounded outlets, illustrating its dual outlet design.
Image: Diagram showing the timer connected to various appliances like a coffee maker, lamp, fan, and stereo, demonstrating universal compatibility.
Image: The timer shown with examples of CFL, Incandescent, and LED light bulbs, indicating broad compatibility with different lighting types.
Arahan Persediaan
Follow these steps to set up your Fosmon mechanical timer:
- Prepare the Pins: The timer comes with all pins in the DOWN position. To begin programming, pull SEMUA the pins around the dial to the UP position. Each pin represents a 30-minute interval.
- Tetapkan Masa Semasa: Rotate the entire dial clockwise until the arrow indicator on the timer points to the current time. The dial is marked with numbers 1-12 and includes sun/moon icons to distinguish AM/PM (white half for AM, black half for PM).
- Program ON Times: Push the pins corresponding to the desired ON times TURUN. Untuk example, if you want the device to turn on from 6:00 PM to 10:00 PM, push down the pins from the '6' mark in the black half to the '10' mark in the black half.
- Program OFF Times: The pins that remain in the UP position represent the OFF times.
- Sambungkan Peranti: Plug the appliance you wish to control into one or both of the timer's outlets.
- Plug in Timer: Insert the timer into a standard 3-prong wall outlet.
- Sahkan Kedudukan Tukar: Ensure the manual override switch (located on the top or side) is set to the PEMASA position (usually indicated by a clock icon or "ON" for timer mode, not "ALWAYS ON").
The timer will now cycle through the programmed ON and OFF times daily.
Image: The Fosmon timer in a home setting, illustrating its use for lighting control and its dual outlet capability.
Arahan Operasi
Once programmed, the timer operates automatically.
- Operasi automatik: The timer will activate and deactivate connected devices according to your set schedule. The dial will continuously rotate, indicating the current time.
- Pembatalan Manual: The timer features a manual override switch, typically located on the top or side.
- To keep the connected device ON secara berterusan, slide the switch to the "ON" or "ALWAYS ON" position.
- To keep the connected device OFF continuously, slide the switch to the "OFF" position.
- To resume programmed operation, slide the switch back to the "TIMER" or clock icon position.
Image: A close-up of the timer, showing the manual override switch on the top edge.
Penyelenggaraan
The Fosmon mechanical timer requires minimal maintenance.
- Pembersihan: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storan: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak HIDUP/MATI pada waktu yang diprogramkan. |
|
|
| Timer dial is not rotating. |
|
|
| Timer makes a ticking sound. | Normal operation for mechanical timers. | This is normal and indicates the timer is functioning. |
Spesifikasi
| Spesifikasi | Nilai |
|---|---|
| Nombor Model | C-10681 |
| Penilaian Elektrik | 125VAC, 15A, 1875W |
| Penilaian Tungsten | 10A |
| Penarafan Motor | 3/4HP |
| Kekerapan | 60Hz |
| Masa Tetapan Minimum | 30 minit |
| Daily Programs | Up to 24 ON/OFF settings |
| Outlet | 2 Cawangan Berasaskan |
| Pensijilan | Tersenarai ETL |
| Dimensi Produk | 7.5 x 6.5 x 1.5 inci (anggaran) |
| Berat Barang | 2.12 auns (anggaran) |
Waranti dan Sokongan
Fosmon products are designed for reliability and performance. For warranty information or technical support, please contact Fosmon customer service.
You can typically find contact details on the official Fosmon website or through your purchase platform. Please have your model number (C-10681) and purchase date available when contacting support.
