1. Pengenalan
This manual provides instructions for the installation, operation, and maintenance of the Okin DeltaDrive Linear Actuator Motor, Model 1.28.000.110.30. This motor is specifically designed to operate the lift mechanism in power recliners and lift chairs, facilitating smooth extension and retraction.
Image: Okin DeltaDrive Linear Actuator Motor, showing the main body, connecting cables, and pin connectors.
2. Maklumat Keselamatan
- Always disconnect power from the recliner or lift chair before attempting any installation, maintenance, or troubleshooting procedures.
- Ensure all electrical connections are secure and correctly oriented to prevent electrical hazards or damage to the unit.
- Keep hands, fingers, and loose clothing clear of all moving parts during operation to avoid injury.
- This device operates on electrical power. Do not expose the motor or its connections to water or excessive moisture.
- Do not attempt to modify the motor or its components. Unauthorized modifications may void the warranty and pose safety risks.
3. Kandungan Pakej
- 1 x Okin DeltaDrive Linear Actuator Motor (Model 1.28.000.110.30)
4. Arahan Pemasangan
Follow these steps carefully to install the Okin DeltaDrive Linear Actuator Motor:
- Penyediaan: Ensure the power recliner or lift chair is unplugged from the wall outlet. Position the chair to allow safe and easy access to the existing actuator motor.
- Removal of Old Actuator:
- Locate the existing actuator motor under the chair.
- Disconnect the 5-pin connector from the hand control and the 2-pin connector from the power transformer.
- Carefully remove any cotter pins, bolts, or fasteners securing the old actuator to the chair frame.
- Remove the old actuator from the chair.
- Installation of New Actuator:
- Position the new Okin DeltaDrive Linear Actuator Motor in the same location and orientation as the old unit.
- Secure the new actuator to the chair frame using the appropriate cotter pins, bolts, or fasteners. Ensure it is firmly attached and moves freely without obstruction.
- Connect the 5-pin connector from the hand control to the corresponding port on the new motor. Ensure the connection is snug and fully inserted.
- Connect the 2-pin connector from the power transformer to the corresponding port on the new motor. Ensure the connection is snug and fully inserted.
- Ujian: Plug the power recliner or lift chair back into the wall outlet. Test the functionality of the chair using the hand control to ensure the actuator extends and retracts smoothly and completely in both directions.
5. Arahan Operasi
The Okin DeltaDrive Linear Actuator Motor is controlled via the chair's existing hand control unit. Operation is straightforward:
- To extend the footrest or recline the chair, press and hold the appropriate button on the hand control.
- To retract the footrest or return the chair to an upright position, press and hold the corresponding button on the hand control.
- For lift chairs, use the hand control to raise or lower the chair as intended.
- Release the button when the desired position is reached. The motor will stop movement.
6. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your actuator motor:
- Pembersihan: Wipe the exterior of the motor with a clean, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the components.
- Pemeriksaan: Periodically inspect all cable connections for signs of wear, fraying, or damage. Ensure all mounting hardware remains secure and tight.
- Pelinciran: This unit is designed for maintenance-free operation and does not require external lubrication. Do not attempt to lubricate internal components.
7. Penyelesaian masalah
If you encounter issues with your Okin DeltaDrive Linear Actuator Motor, refer to the table below for common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Motor tidak beroperasi. | Tiada bekalan kuasa. Loose or incorrect connections. Faulty hand control or power transformer. |
|
| Motor operates in only one direction. | Incorrect wiring of the 5-pin connector or faulty hand control. |
|
| Motor makes unusual noises (grinding, clicking). | Obstruction in the mechanism or internal mechanical issue. |
|
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 1.28.000.110.30 |
| Jenama | Okin |
| Dimensi Produk | 22"D x 6"W x 4"H |
| Berat Barang | 4.5 paun |
| warna | Hitam |
| UPC | 617762077555 |
| Ketersambungan | 5-pin connector for hand control, 2-pin connector for power transformer |
| Penggantian Serasi | 9.28.000.046.30, 9.28.000.058.30, 9.28.000.070.30, 9.28.000.073.30, 9.28.000.092.30, 9.28.000.104.30, 9.28.000.106.30, 9.28.000.111.30, 9.28.000.117.30, 9.28.000.129.30, 9.28.000.136.30, 1.22.000.568.30, 1.22.000.651.30, 1.22.000.679.30, 1.28.000.013.30, 1.28.000.015.30, 1.28.000.050.30, 1.28.000.002.59, 1.28.000.074.30, 1.28.000.086.30, 1.28.000.093.30, 1.28.000.095.30, 1.28.000.108.30, 1.28.000.122.30, 1.28.000.131.30, 1.28.000.132.30 |
9. Waranti dan Sokongan
For detailed warranty information, please refer to the original product packaging or the documentation provided at the time of purchase. For technical support, replacement parts, or further assistance, please contact Okin customer service directly through their official webtapak atau pengedar sah.
