TC Electronic Flashback 2 delay

TC Electronic FLASHBACK 2 DELAY User Manual

Model: Flashback 2 Delay

pengenalan

The TC Electronic FLASHBACK 2 DELAY is a versatile delay effects pedal designed for guitarists seeking a wide range of delay sounds and innovative control. This manual provides essential information for setting up, operating, and maintaining your device.

TC Electronic Flashback 2 Delay Pedal

Imej: Depan view of the TC Electronic Flashback 2 Delay pedal, showcasing its blue casing and control knobs.

Ciri-ciri Utama

  • Advanced delay effects pedal with a comprehensive suite of delay types.
  • Integrated MASH footswitch for expressive real-time control over various parameters.
  • Built-in TonePrint technology for custom effect settings and artist presets.
  • Stereo input and output for flexible signal routing.
  • Compact and durable design suitable for pedalboards.

Persediaan

Sambungan Kuasa

Connect a 9V DC power supply (not included) to the DC IN jack on the rear of the pedal. Ensure the power supply meets the specified voltage and current requirements (9V DC, 100mA, center negative).

Sambungan Audio

Connect your instrument to the INPUT (MONO) jack. For stereo operation, connect a second cable to the INPUT B jack. Connect the OUTPUT (MONO) jack to your amplifier or next pedal in the signal chain. For stereo output, connect a second cable from OUTPUT B.

belakang view of Flashback 2 Delay pedal showing input/output jacks and power input

Imej: Belakang view of the Flashback 2 Delay pedal, illustrating the input and output jacks, along with the power input.

Arahan Operasi

Operasi Asas

To activate the pedal, press the MASH footswitch. The LED will illuminate to indicate the effect is active. Press the footswitch again to bypass the effect.

Kawal Selesaiview

Tombol tunda

Tombol KELEWATAN:

Controls the delay time, from short slap-back echoes to long, atmospheric repeats.

Tombol maklum balas

Tombol MAKLUM BALAS:

Adjusts the number of repeats. Higher settings create more echoes, potentially leading to self-oscillation.

Tombol aras

Tombol TAHAP:

Controls the overall volume of the delayed signal.

Type selector knob

TYPE Selector:

Selects between various delay algorithms including 2290, Analog, Tape, Dynamic, Modulated, Crystal, Reverse, and Looper modes.

MASH Footswitch

The MASH footswitch is pressure-sensitive, allowing you to control various effect parameters in real-time by pressing harder on the switch. The specific parameter controlled by MASH can be customized via the TonePrint app.

Close-up of the MASH footswitch on the Flashback 2 Delay pedal

Imej: Terperinci view of the MASH footswitch, highlighting its pressure-sensitive design.

Teknologi TonePrint

TonePrint allows you to load custom presets created by TC Electronic artists or design your own unique delay sounds. Connect the pedal to your computer via USB or use the TonePrint app on your smartphone to beam presets wirelessly to the pedal's pickup.

The pedal features three dedicated TonePrint slots (1, 2, 3) accessible via the TYPE selector, allowing you to quickly switch between your favorite custom sounds.

Penyelenggaraan

  • Keep the pedal clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Elakkan mendedahkan pedal kepada suhu, kelembapan atau cahaya matahari langsung yang melampau.
  • Do not attempt to open the pedal enclosure or perform unauthorized repairs, as this may void your warranty.
  • Always use a compatible 9V DC power supply to prevent damage.

Menyelesaikan masalah

If you experience issues with your pedal, consider the following common troubleshooting steps:

  • Tiada Bunyi: Periksa semua sambungan kabel (instrumen, amplifier, power supply). Ensure the pedal is receiving power and the effect is engaged.
  • Bunyi Lemah atau Terherot: Verify that the LEVEL knob is set appropriately. Check your instrument's output and amplifier's input levels.
  • Tingkah laku yang tidak dijangka: Ensure the correct delay type is selected. If using TonePrint, verify the preset is loaded correctly. Try resetting the pedal by disconnecting and reconnecting power.

Spesifikasi

CiriPerincian
Berat Barang0.33 Kilogram (11.6 auns)
Dimensi Produk7.4"P x 5"L x 12.2"T (12.2 x 7.4 x 5 inci)
JenamaTC Electronic
Nombor ModelFlashback 2 delay
Sumber KuasaBattery Powered (9V DC, 100mA, center negative recommended)
Format IsyaratAnalog
Jenis PenyambungUSB 2.0 Jenis B
warnaBiru

Apa yang ada dalam Kotak

  • TC Electronic Flashback 2 Delay Pedal

Note: Power supply and audio cables are typically sold separately.

Waranti dan Sokongan

For warranty information and technical support, please refer to the official TC Electronic webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

You can visit the official TC Electronic store for more information: TC Electronic Store