Manual Pengguna Kit Pemotongan Pelbagai Fungsi Daewoo DAMT520 51.7cc

1. Pengenalan

The Daewoo DAMT520 Multifunction Cutting Kit is a versatile 4-in-1 tool designed for various garden maintenance tasks. This kit includes a powerful 51.7cc 2-stroke gasoline engine and interchangeable attachments for hedge trimming, chainsaw pruning, and brush cutting. This manual provides essential information for the safe and effective operation, assembly, and maintenance of your Daewoo DAMT520.

2. Amaran Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kecederaan serius atau kematian.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, work gloves, and hearing protection, when operating the tool.
• Keep bystanders, children, and pets at a safe distance (at least 15 meters) from the operating area.
• Do not operate the chainsaw attachment in areas where there is a risk of fire or explosion.
• Inspect the tool before each use. Do not operate the chainsaw if it is damaged or if fuel is leaking.
• When using the chainsaw, wear a dust and fume protection mask to avoid inhaling harmful particles.
• Pastikan pengudaraan yang betul semasa mengisi minyak atau mengendalikan enjin.
• Never modify the tool or use non-approved attachments.
• Always handle fuel with extreme care. Store fuel in an approved container in a well-ventilated area.
• Before performing any maintenance or cleaning, ensure the engine is turned off and cooled down.

3. Produk Lebihview

The Daewoo DAMT520 kit consists of a powerful engine unit and three interchangeable cutting attachments:

• Unit Enjin: The core power source, a 51.7cc 2-stroke gasoline engine with a D-handle for control.
• Hedge Trimmer Attachment: Untuk membentuk dan memangkas lindung nilai dan pokok renek.
• Chainsaw Attachment: For pruning branches and cutting smaller trees.
• Brush Cutter Attachment: For clearing grass and dense vegetation.

Figure 1: The Daewoo DAMT520 Multifunction Cutting Kit. This image displays the complete kit, including the main power unit with the 51.7cc 2-stroke engine and D-handle. To the right, separated, are the three interchangeable attachments: a pole chainsaw, a hedge trimmer, and a brush cutter head, each designed to connect to the main shaft.

4. Pemasangan dan Persediaan

The Daewoo DAMT520 requires assembly before first use. Follow these general steps:

1. Buka Pembungkusan Komponen: Carefully remove all parts from the packaging and check against the packing list.
2. Pasang Aci: Connect the main shaft sections if they are separate. Ensure they are securely fastened.
3. Attach Engine Unit: Securely attach the engine unit to the main shaft, ensuring all clamps and bolts are tightened.
4. Select and Attach Tool Head: Choose the desired attachment (hedge trimmer, chainsaw, or brush cutter). Align the attachment with the end of the shaft and secure it according to the specific instructions for that attachment. Ensure it is firmly locked in place.
5. Penyediaan Bahan Api: The engine requires a mixture of gasoline and 2-stroke engine oil. The recommended mixing ratio is 25 ml of 2-stroke oil per liter of unleaded gasoline. Mix thoroughly in an approved fuel container before filling the fuel tank.
6. Chainsaw Oil (if applicable): For the chainsaw attachment, fill the chain oil reservoir with appropriate chain lubricant.

Refer to the detailed diagrams in your product's specific assembly guide for precise instructions on connecting each component.

5. Arahan Operasi

5.1 General Engine Operation

1. Memulakan Enjin: Follow the manufacturer's specific starting procedure, typically involving priming the carburetor, setting the choke, pulling the starter cord, and then adjusting the choke as the engine warms up.
2. Menghentikan Enjin: Release the throttle and press the engine stop switch.
3. Kawalan Pendikit: Use the throttle lever on the handle to control engine speed and cutting power.

5.2 Using the Hedge Trimmer Attachment

• This attachment is designed for cutting hedges and shrubs with a maximum branch diameter of 24 mm.
• The blade length is 410 mm, providing a good reach for various hedge sizes.
• Operate the trimmer with a steady, sweeping motion, ensuring both hands are firmly on the handles.
• Avoid cutting branches thicker than the recommended capacity to prevent damage to the blades and engine.

5.3 Using the Chainsaw Attachment

• The chainsaw attachment is suitable for pruning fruit trees, cutting hanging branches, and trimming tree tops.
• It features a 250 mm (10-inch) bar, with a maximum effective cutting length of 200 mm.
• Pastikan rantai ditegangkan dan dilincirkan dengan betul sebelum setiap penggunaan.
• Always maintain a secure footing and balance. Be aware of kickback potential.
• Do not attempt to cut branches larger than the recommended cutting length.

5.4 Using the Brush Cutter Attachment

• This attachment is designed for cutting grass and small vegetation.
• It has a cutting width of 380 mm and is ideal for use with a 2 mm cutting line.
• Clear the work area of any debris, rocks, or objects that could be thrown by the cutting line.
• Operate with a steady, controlled motion, keeping the cutting head away from your body and feet.

6. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your Daewoo DAMT520. Always ensure the engine is off and cool before performing any maintenance.

• Pembersihan: After each use, clean the engine unit and attachments to remove grass, dirt, and debris. Use a damp cloth; avoid using high-pressure water.
• Penapis Udara: Periodically inspect and clean the air filter. A clogged air filter can reduce engine performance.
• Palam Pencucuh: Periksa palam pencucuh untuk haus dan celah yang betul. Gantikan jika perlu.
• Sistem Bahan Api: Drain the fuel tank if storing the tool for an extended period to prevent fuel degradation.
• Memotong Lampiran:
  • Pemangkas lindung nilai: Keep blades sharp and lubricated. Inspect for damage.
  • Gergaji rantai: Ensure the chain is sharp, properly tensioned, and adequately lubricated. Check the bar for wear.
  • Pemotong berus: Inspect the cutting line or blade for wear and replace as needed.
• Pemeriksaan Am: Regularly check all nuts, bolts, and fasteners for tightness. Inspect for any signs of wear or damage to cables and hoses.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your Daewoo DAMT520.

• Enjin Gagal Dimulakan:
  • Check fuel level and ensure correct fuel/oil mixture.
  • Verify spark plug is clean and properly connected.
  • Ensure choke is set correctly for starting.
• Loss of Power During Operation:
  • Bersihkan atau ganti penapis udara.
  • Check for proper fuel flow.
  • Ensure cutting attachments are not clogged or dull.
• Getaran Berlebihan:
  • Inspect cutting attachments for damage or imbalance.
  • Check for loose fasteners on the shaft or engine unit.

Jika masalah berterusan selepas mencuba penyelesaian ini, hubungi juruteknik servis yang berkelayakan.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Daewoo Power Products aims to provide reliable tools and customer support.

If you require technical assistance, spare parts, or have questions regarding the operation or maintenance of your DAMT520, please contact Daewoo customer service or an authorized service center. Keep your purchase receipt and model number (DAMT520) handy for faster service.