USARemote h-49308-4btn

USARemote Key Fob Keyless Entry Remote Instruction Manual

Model: h-49308-4btn

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your USARemote h-49308-4btn key fob keyless entry remote. This product is designed as a replacement or spare key fob for compatible Honda vehicles.

1.1 Keserasian Produk

This key fob is compatible with the following Honda vehicle models:

Image showing compatible Honda models for the key fob

Image: Visual representation of compatible Honda models for the USARemote key fob.

2. Kandungan Pakej

Each package includes:

Image showing two USARemote key fobs with included components and programming information

Image: Two USARemote key fobs, highlighting that they are new, include electronics and a battery, and are self-programmable with one working key.

3. Persediaan dan Pengaturcaraan

The USARemote h-49308-4btn key fob requires two distinct programming steps for full functionality: remote function programming and immobilizer/ignition programming.

3.1 Remote Function Programming (Lock/Unlock/Panic/Trunk)

This key fob is self-programmable for remote functions (locking, unlocking, panic, trunk release) if you possess at least one currently working key fob for your vehicle. Follow the vehicle's owner's manual instructions for remote programming or consult an automotive locksmith.

General Self-Programming Steps (may vary by vehicle model and year):

  1. Masuk kenderaan dan tutup semua pintu.
  2. Insert an existing, working key into the ignition.
  3. Turn the ignition to the "ON" position (II) and then back to "OFF" (0) four times within 6 seconds.
  4. On the fourth "ON" turn, leave the ignition in the "ON" position. The door locks should cycle (lock and unlock) automatically, indicating the vehicle is in programming mode.
  5. Within 5 seconds, press the "Lock" button on the new key fob. The door locks should cycle again to confirm successful programming.
  6. If programming additional key fobs (including existing ones), press the "Lock" button on each additional fob within 5 seconds of the previous one. The door locks will cycle after each successful programming.
  7. Turn the ignition to "OFF" and remove the key. Test all programmed key fobs to ensure they function correctly.

Nota: If you do not have a working key fob, or if these steps do not work, professional programming by a dealership or certified automotive locksmith may be required for remote functions.

3.2 Immobilizer/Ignition Programming and Key Cutting

For the key blade to physically turn the ignition and for the vehicle to start, two additional steps are necessary:

  1. Pemotongan Kunci: The uncut key blade must be professionally cut to match your vehicle's ignition and door locks. This typically requires a laser key cutter, available at Honda dealerships or specialized automotive locksmiths.
  2. Immobilizer Chip Programming: The key fob contains an immobilizer chip that must be programmed to your vehicle's engine control unit (ECU). This process requires specialized diagnostic equipment (scan tool) and cannot be performed through self-programming methods. A Honda dealership or a certified automotive locksmith can perform this service.

Penting: Without proper immobilizer programming, the key fob will only operate the remote functions (lock/unlock) and will not start the vehicle, even if the key blade is cut correctly.

4. Arahan Operasi

Your USARemote key fob features four buttons for convenient vehicle access and security:

USARemote 4-button key fob with lock, unlock, trunk, and panic buttons

Imej: Depan view of the USARemote 4-button key fob.

5. Penyelenggaraan

5.1 Penggantian Bateri

Your key fob comes with a pre-installed Lithium Ion battery. When the remote's range decreases or it stops responding, the battery may need replacement.

Untuk menggantikan bateri:

  1. Carefully separate the two halves of the key fob casing using a small flat-head screwdriver or a coin in the designated notch.
  2. Note the orientation of the existing battery.
  3. Remove the old battery and insert a new CR1616 Lithium Ion battery, ensuring the positive (+) side faces the same direction as the old battery.
  4. Carefully snap the two halves of the key fob casing back together until secure.
  5. Test the key fob's functions.

Awas: Ensure proper battery polarity. Incorrect installation can damage the key fob. Dispose of old batteries responsibly.

5.2 Penjagaan dan Pengendalian

6. Penyelesaian masalah

If your USARemote key fob is not functioning as expected, consider the following troubleshooting steps:

MasalahKemungkinan PuncaPenyelesaian
Remote functions (lock/unlock) do not work.
  • Bateri lemah atau mati.
  • Key fob is not programmed correctly for remote functions.
  • Gangguan daripada peranti elektronik lain.
  • Gantikan bateri (lihat Bahagian 5.1).
  • Repeat the remote function programming steps (see Section 3.1).
  • Jauhkan diri daripada sumber gangguan elektromagnet yang kuat.
Key fob does not start the vehicle.
  • Key blade is not cut.
  • Immobilizer chip is not programmed.
  • Have the key blade professionally cut (see Section 3.2).
  • Have the immobilizer chip professionally programmed by a dealership or locksmith (see Section 3.2).
Jarak jauh yang dikurangkan.
  • Bateri lemah.
  • Environmental factors or interference.
  • Gantikan bateri (lihat Bahagian 5.1).
  • Ensure no obstructions between the key fob and the vehicle.

If these steps do not resolve the issue, please contact USARemote customer support for further assistance.

7. Spesifikasi

8. Waranti dan Sokongan

USARemote offers a hassle-free return policy for products that do not function as expected. For returns, please refer to your order details.

For technical assistance or further inquiries, USARemote technical support is available to assist you.

Video: USARemote technical support message, emphasizing readiness to assist customers.

Dokumen Berkaitan - h-49308-4btn

Praview ULINE Digital Key Cabinet: Operation, Programming, and Battery Replacement Guide
Comprehensive guide for the ULINE H-2932 Digital Key Cabinet, covering operation, programming of master, supervisor, and user codes, battery replacement, and locker mode functionality.
Praview Fortin EVO-ONE THAR-ONE-TOY17 Installation Guide for Toyota Corolla
Detailed installation guide for the Fortin EVO-ONE remote starter and immobilizer bypass module (THAR-ONE-TOY17 harness) for the 2023 Toyota Corolla (H-Key). Covers wiring, DCRYPTOR programming, remote start functionality, and important safety notices.
Praview OBDOK PCF79xx Unlocker: Car Key Remote Connection Diagrams
A comprehensive guide from OBDOK detailing unlocking connection diagrams for various car key remotes, including BMW, Chrysler, GM, Kia, Hyundai, and more, using the PCF79xx Unlocker tool. Features PCB layouts and pinouts.
Praview InterMotive H-EVO506-A Installation and Operation Guide for Ford F250-F600
Comprehensive installation instructions, operational details, configuration options, and diagnostic procedures for the InterMotive H-EVO506-A module, designed for Ford F250-F600 vehicles to manage engine start/stop and idle control.
Praview Modine Gas-Fired Unit Heater and Duct Furnace Burner/Pilot Assembly Replacement Instructions
Step-by-step installation guide for replacing the main burner and pilot assembly in Modine gas-fired unit heaters and duct furnaces. Covers removal, reassembly, and component identification for natural and propane gas models.
Praview Arahan Pemasangan Veise Handleset
Panduan langkah demi langkah untuk memasang pemegang Veise, termasuk senarai bahagian, penyediaan pintu, pelarasan selak dan ujian akhir.