EARTHQUAKE 21884

Manual Pengguna Tali Penggantian Mesin Pemotong Rumput GEMPA 21884

Model: 21884

Produk Selesaiview

The EARTHQUAKE 21884 String Mower Replacement Line is designed for efficient and durable cutting with compatible walk-behind string mowers. This package contains 24 pre-cut lines, each made from high-density nylon for extended operational life.

These replacement lines are specifically compatible with EARTHQUAKE walk-behind string mower models 37676 and 28463.

Package of 24 black Earthquake string mower replacement lines.

Image: A package containing 24 black string mower replacement lines, ready for use.

Persediaan dan Pemasangan

Proper installation of the replacement lines is crucial for optimal performance and safety. Always ensure your string mower is turned off and the spark plug wire is disconnected before performing any maintenance or installation procedures.

  1. Sediakan Mesin Pemotong: Ensure the string mower is on a flat, stable surface. Turn off the engine and disconnect the spark plug wire to prevent accidental starting.
  2. Remove Old Lines (if applicable): If there are any remaining worn or broken lines, carefully remove them from the cutting head's connection points.
  3. Insert New Lines: Take one replacement line. Locate the designated connection points or slots on the cutting head of your string mower. Thread one end of the replacement line through the connection point until the line is centered, with equal lengths extending from both sides.
  4. Talian Selamat: Ensure the lines are securely seated in their connection points. Some cutting heads may require a specific knot or locking mechanism; refer to your string mower's specific manual for detailed instructions on securing the lines.
  5. Ulang: Repeat the process for all necessary line connection points on the cutting head.
Close-up of a string mower cutting head with a red replacement line installed.

Imej: Dari dekat view of a string mower's cutting head, demonstrating how a replacement line is threaded and installed. Note: Line color may vary from product image.

A person installing a red replacement line on an Earthquake walk-behind string mower.

Image: A person demonstrating the installation of a replacement line on an EARTHQUAKE walk-behind string mower. Note: Line color may vary from product image.

Pertimbangan Operasi

While these lines are a component, their performance is directly related to the operation of your string mower. The high-density nylon construction of EARTHQUAKE replacement lines is designed for durability and longer run times, reducing the frequency of replacements during operation.

Penyelenggaraan

Regular inspection and timely replacement of string mower lines ensure consistent cutting performance and safety.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Lines break frequently.
  • Frequent contact with hard surfaces (rocks, concrete, fences).
  • Operating in very dense or woody vegetation.
  • Incorrect line installation.
  • Avoid hitting hard obstacles.
  • Clear dense areas slowly and in smaller passes.
  • Review installation steps in this manual and your mower's manual.
Prestasi pemotongan yang lemah.
  • Worn or too short lines.
  • Insufficient engine RPM.
  • Replace worn lines.
  • Ensure mower is operating at full throttle for cutting.

Spesifikasi

Maklumat Sokongan

EARTHQUAKE is committed to providing effective and innovative outdoor power equipment. For assistance, questions, or support regarding your EARTHQUAKE products, including these replacement lines, please contact our U.S.-based support team.

While specific contact details are not provided in this manual, general support information can typically be found on the official EARTHQUAKE weblaman web atau melalui dokumentasi asal produk anda.

Note: This product is a replacement part and does not typically come with a separate warranty beyond the original equipment's warranty or standard consumer rights.

Dokumen Berkaitan - 21884

Praview Manual Pengendali Mesin Pemotong Rumput Gempa Bumi 40314
This operator manual provides comprehensive instructions for the safe assembly, operation, maintenance, and troubleshooting of the Earthquake String Mower, model 40314. It includes safety warnings, operating procedures, maintenance schedules, and a troubleshooting guide.
Praview Manual Pengendali Mesin Pemotong Rusuk Gempa Bumi
This operator manual provides comprehensive instructions for the safe assembly, operation, maintenance, and troubleshooting of the Earthquake String Mower, model 40314. It includes safety warnings, specifications, and detailed guides for various maintenance tasks.
Praview Manual Pengendali Mesin Pemotong Rumput Gempa Bumi M200
Manual pengendali untuk Earthquake String Mower M200, yang memperincikan kerosakan bahagian, lampiran enjin dan takal, komponen kepala mesin pemotong rumput dan pemasangan unit asas.
Praview Kerosakan Alat Ganti Bergambar Mesin Pemotong Rumput Gempa Bumi 40314
Pecahan alat ganti berilustrasi yang komprehensif untuk mesin pemotong rumput Earthquake 40314. Dapatkan nombor alat ganti, penerangan dan kuantiti terperinci untuk peralatan kuasa inovatif yang dikeluarkan oleh Ardisam.
Praview Kerosakan Bahagian Bergambar Penggarap 2 Kitaran Gempa Bumi MC43
Gambarajah terperinci tentang pecahan bahagian dan pemasangan untuk komponen enjin, hud, tayar dan hendal Earthquake MC43 2-Cycle Cultivator. Termasuk nombor bahagian, penerangan dan kuantiti untuk pengenalpastian dan pesanan yang mudah.
Praview Arahan dan Senarai Bahagian Gerudi Kuasa dan Pemasangan Enjin Gempa Bumi E43WC
Arahan pemasangan yang komprehensif dan senarai bahagian terperinci untuk Gerudi Kuasa Gempa Bumi E43WC dan Enjin Viper E43CCVnya, termasuk yang diletupkan view gambar rajah dan penerangan komponen.